View SE5511T_9128828.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

data sheet SE5511T: dual band 802.11n wlan/bt front end skyworks solutions, inc. ? phone [781] 376 - 3000 ? fax [781] 376 - 3100 ? sales@skyworksinc.com ? www.skyworksinc.com 202 403 a ? skyworks proprietary information ? products and product information are subject to change without notice ? october 23 , 2012 1 applications ? ieee802.11b dsss wlan ? ieee802.11 a, g ,n ofdm wlan ? embedded applications with bluetooth (mobile) features ? all rf ports matched to 50 ? integrated 2.4 ,5 ghz pa, 5 ghz lna , sp3t, sp2t switches and filtering ? i ntegrated power detector ? 19.5 dbm @ 3 % evm , 802.11g, 54 mbps ? 18 dbm @ 3 % evm , 802.11a, 54 mbps ? lead free, halogen free and rohs compliant ? compact package, 3 x 4 x 0 .6 mm , msl 1 ordering information part no. package remark SE5511T 28 pin qfn samples SE5511T -r 28 pin qfn tape & reel se5511 t-ek1 n/a evaluation kit product description the SE5511T is a complete 802.11n wlan rf front - end module providing all the functionality of the power amplifier s , lna, power detector, antenna switch es , filtering and associated matching. the SE5511T provide s a complete 2.4 ghz and 5 ghz wlan rf solution from the output of the transceiver to the antennas in a compact form factor. the receive path is designed to maximize performance by providing both a 5 ghz l ow noise amplifier with bypass mode, for use when high power signals are being received. designed for ease of use, all rf ports are matched to 50 to simplify pcb layout and the interface to the transceiver rfic. the SE5511T also includes a tr ansmitter power detector for each band with 20 db of dynamic range . functional block diagram pen5 pen2 rx5 rx2 bt cbt ant5 ant2 tx5 tx2 2.4 ghz pa 5.4 ghz pa 5.4 ghz lna len5 pwr det det crx2 crx5 figure 1 : functional block diagram downloaded from: http:///
data sheet SE5511T: dual band 802.11n wlan/bt front end skyworks solutions, inc. ? phone [781] 376 - 3000 ? fax [781] 376 - 3100 ? sales@skyworksinc.com ? www.skyworksinc.com 202 403 a ? skyworks proprietary information ? products and product information are subject to change without notice ? october 23 , 2012 2 pin out diagram cbt tx2 rx5 tx5 bt rx2 gnd crx2 gnd gnd csp5 pen2 vcc5 dnc vcc4 gnd len5 det gnd csp2 vcc1 ant5 ant2 vcc3 crx5 gnd pen5 vcc2 15 4 3 2 14 13 12 11 10 9 8 7 6 1918 17 16 15 28 27 26 25 24 23 22 21 20 figure 2 : SE5511T pin out (top view through package) pin out description pin no. name description 1 csp2 2.4 ghz pa bias speed - up 2 rx 2 2.4 ghz rec eive port 3 gnd ground 4 rx 5 5 ghz receive port 5 vcc1 power supply 6 tx 5 5 ghz transmit port 7 gnd ground 8 vcc5 power supply 9 vcc4 power supply 10 pen2 enable for 2.4 ghz pa and transmit switch 11 det power detector output 12 len5 enable for 5 ghz lna and receive switch 13 gnd ground 14 bt bluetooth port 15 cbt control for bluetooth port pin no. name description 16 ant 5 5 ghz antenna port 17 gnd ground 18 ant 2 2.4 ghz antenna port 19 c rx2 control for 2.4 ghz receive 20 crx5 control for 5 ghz receive 21 gnd gr ound 22 vcc3 power supply 23 pen5 enable for 5 ghz pa and transmit switch 24 csp5 5 ghz pa bias speed - up 25 dnc do not connect 26 gnd ground 27 vcc2 power supply 28 tx 2 2.4 ghz transmit port downloaded from: http:///
data sheet SE5511T: dual band 802.11n wlan/bt front end skyworks solutions, inc. ? phone [781] 376 - 3000 ? fax [781] 376 - 3100 ? sales@skyworksinc.com ? www.skyworksinc.com 202 403 a ? skyworks proprietary information ? products and product information are subject to change without notice ? october 23 , 2012 3 absolute maximum ratings these are stress ratings only. exposure to stresses beyond these maximum ratings may c ause permanent damage to, or affect the reliability of the device. avoid operating the device outside the recommended oper ating conditions defined below. this device is esd sensitive. handling and assembly of this device should be at esd protected workstations. symbol definition min. max. unit v cc supply voltage - 0.3 5.5 v v in control pin voltages - 0.3 3.6 v tx rf in t x2 /t x5 , with ant 2/ant5 terminated in 50 ? - + 10 dbm t a operating temperature range -40 85 c t stg storage temperature range -40 1 50 c esd hbm jedec jesd22 - a114 all pins 1000 v recommended operating conditions symbol parameter min. typ. max. unit v cc supply voltage 2. 97 3.3 3.6 v t a ambient temperature -40 25 85 c control logic characteristics conditions: v cc = 3.3 v, t a = 25 c, as measured on skyworks solutions? SE5511T -ek1 evaluation board (de - embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted. downloaded from: http:///
data sheet SE5511T: dual band 802.11n wlan/bt front end skyworks solutions, inc. ? phone [781] 376 - 3000 ? fax [781] 376 - 3100 ? sales@skyworksinc.com ? www.skyworksinc.com 202 403 a ? skyworks proprietary information ? products and product information are subject to change without notice ? october 23 , 2012 4 parameter min nom max units logic input high : vih 1. 4 vcc+0.3 upto 3.6 v logic input low : vil 0 0.3 v logic input current : iih all control pins except crx2, crx5 crx2, crx5 1 50 a logic input current : iil all control pins except crx2, crx5 c rx2, crx5 1 20 a downloaded from: http:///
data sheet SE5511T: dual band 802.11n wlan/bt front end skyworks solutions, inc. ? phone [781] 376 - 3000 ? fax [781] 376 - 3100 ? sales@skyworksinc.com ? www.skyworksinc.com 202 403 a ? skyworks proprietary information ? products and product information are subject to change without notice ? october 23 , 2012 5 dc electrical characteristics conditions: v cc = 3.3 v, t a = 25 c, as measured on skyworks solutions? SE5511T -ek 1 evaluation board (de - embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted symbol parameter conditions min. typ. max. unit tx i cc -g total 802.11g transmit supply current p out = 20 dbm, 54 mbps ofdm signal, 64qam, pen2 = hi , p out = 1 8 dbm, 54 mbps ofdm signal, 64qam, pen2 = hi , - 2 15 185 ma tx i cq-g quiesc ent current , 802.11g transmit supply current no rf applied , pen2=hi - 120 - ma tx i cc -a total 802.11a transmit supply current p out = 1 8 dbm, 54 mbps ofdm signal, 64qam, pen5= hi p out = 1 6 dbm, 54 mbps ofdm signal, 64qam, pen5= hi - 2 30 210 ma tx i cq -a quiescent current , 802.11a transmit supply current no rf applied , pen5 - hi - 1 55 - ma rx i cc -a total 802.11a receive supply current crx5 = hi, len= hi crx5 = hi, len = lo - 10 0.2 5 ma rxi cc -g total 802.11 g receive supply current crx2 = hi 0.25 ma i cc - bt total bt supply current cbt = hi - 0.25 ma i cc_off total supply current no rf, pen2=pen5=crx2=crx5=cbt =len5=0v - 5 a downloaded from: http:///
data sheet SE5511T: dual band 802.11n wlan/bt front end skyworks solutions, inc. ? phone [781] 376 - 3000 ? fax [781] 376 - 3100 ? sales@skyworksinc.com ? www.skyworksinc.com 202 403 a ? skyworks proprietary information ? products and product information are subject to change without notice ? october 23 , 2012 6 operating modes mode# mode description pen2 pen5 len5 crx2 crx5 cbt 0 all off 0 0 0 0 0 0 1 bt 0 0 0 0 0 1 2 bt + rx5(low gain) 0 0 0 0 1 1 3 bt + rx5(high gain) 0 0 1 0 1 1 4 bt + tx5 0 1 0 0 0 1 5 rx2 + rx5(low gain) 0 0 0 1 1 0 6 rx2 + rx5(high gain) 0 0 1 1 1 0 7 tx2 1 0 0 0 0 0 8 tx5 0 1 0 0 0 0 9 rx2 0 0 0 1 0 0 10 rx5 (low gain) 0 0 0 0 1 0 11 rx5 (high gain) 0 0 1 0 1 0 downloaded from: http:///
data sheet SE5511T: dual band 802.11n wlan/bt front end skyworks solutions, inc. ? phone [781] 376 - 3000 ? fax [781] 376 - 3100 ? sales@skyworksinc.com ? www.skyworksinc.com 202 403 a ? skyworks proprietary information ? products and product information are subject to change without notice ? october 23 , 2012 7 ac electrical characteristics 2.4 ghz transmit characteristics conditions: v cc = 3.3 v, pen2= hi , t a = 25 c, as measured on skyworks solutions? SE5511T -ek1 evaluation board (de - embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted. symbol parameter condition min. typ. max. unit f in frequency range - 2400 - 2500 mhz p out output power, 54 mbps ofdm, 64 qam evm=3% evm=2.5% 18 .5 19.5 18 dbm s 21 gain 2400 ? 2500 mhz 2 7.5 db s 21 _oob out of band gain <2170 mhz 19 db ?s 21 gain variation over band 1.5 dbpp s 11 input return loss -10 db s 22 output return loss - 10 -5 db nf noise figure 10 db 2f 11b harmonics 2f @ pout= 22 dbm - 35 - 25 dbm/mhz 3f 3f @ pout = 22 dbm - 35 - 30 acp 11b spectral mask 11b @ pout=22 dbm: fc +/ - 11 mhz fc +/ - 22 mhz - 34 - 54 - 32 - 52 dbc stab stability p out 23 dbm load vswr = 4 :1 all non - harmonically related outputs less than - 45 dbm/ mhz ten enable time 10% to 90% of tx rf power, from time that pen2 is at 50% 800 nsec downloaded from: http:///
data sheet SE5511T: dual band 802.11n wlan/bt front end skyworks solutions, inc. ? phone [781] 376 - 3000 ? fax [781] 376 - 3100 ? sales@skyworksinc.com ? www.skyworksinc.com 202 403 a ? skyworks proprietary information ? products and product information are subject to change without notice ? october 23 , 2012 8 2. 4 ghz receive characteristics conditions: vcc = 3.3v , crx2 = hi , t a = 25 c, as measured on skyworks solutions? SE5511T -ek1 evaluation board (de - embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted. symbol parameter condi tion min. typ. max. unit f out frequency range - 2400 - 2500 mhz r x2 il insertion loss crx2= hi - 1.0 db s 11 rx2 port return loss crx2= hi - - 14 db isol sw switch isolation ant2 - rx2, pen2=hi 26 - db ip1db input p1db crx2= hi 15 dbm t en enable time 10% to 90% of rx rf power, from time that crx 2 is at 50% - - 800 nsec bluetooth characteristics conditions: v cc = 3.3 v , cbt= hi, t a = 25 c , as measured on skyworks solutions? SE5511T - ek1 evaluation board (de- embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted. symbol parameter condition min. typ. max. unit f out frequency range - 2400 - 2500 mhz bt il insertion loss cbt= hi - 1.0 db s 11 bt port return loss cbt= hi - - 14 db isol sw switch isolation ant2 - bt, pen2=hi 20 - - db ip1db input p1db cbt= hi 15 dbm t en enable time 10% to 90% of bt rf power, from time that cbt is at 50% - - 800 nsec downloaded from: http:///
data sheet SE5511T: dual band 802.11n wlan/bt front end skyworks solutions, inc. ? phone [781] 376 - 3000 ? fax [781] 376 - 3100 ? sales@skyworksinc.com ? www.skyworksinc.com 202 403 a ? skyworks proprietary information ? products and product information are subject to change without notice ? october 23 , 2012 9 5 ghz transmit characteristics conditions: vcc = 3.3 v, pen5= hi , t a = 25 c, as measured on skyworks solutions? SE5511T -ek1 evaluation board (de - embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted. symbol parameter condition min. typ. max. unit f in frequency range - 4900 - 5 85 0 mhz p out output power, 54 mbps ofdm, 64 qam evm=3% evm=2.5% 1 7. 0 18 16 dbm s 21 gain 28 db ?s 21 gain variation over 40 mhz channel 1.5 dbpp s 11 input return loss - 14 - 10 db s 22 output return loss - 10 -5 db 2f harmonics @ pout=18 dbm 2f (5150 - 5300 mhz) 2f (5300 - 5850 mhz) - 40 - 50 - 35 -42 dbm/mhz 3f 3f @ pout = 18 dbm - 50 - 45 acp11a spectral mask 11a @ pout=18 dbm: fc +/ - 11 mhz fc +/ - 20 mhz fc +/ - 30 mhz - 23 - 30 - 43 - 20 - 28 - 40 dbc stability p out 21 dbm load vswr = 4 :1 all non - harmonically related outputs less than - 45 dbm/mhz t en enable time 10% to 90% of tx rf power, from time that pen5 is at 50% - - 800 nsec 5 ghz receive characteristics conditions: vcc = 3.3 v, len5= hi , t a = 25 c, as measured on skyworks solutions? SE5511T -ek1 evaluation board (de - embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted. symbol parameter condition min. typ. max. unit f out frequency range - 4900 - 5900 mhz s21 gain len5 = hi 12 db len5 = lo -7 db nf noise figure len5=hi - 2.5 db ip1db input p1db len5= hi len5=lo -8 +5 -6 +7 - dbm s 11 input return loss - - -10 db t en enable time 10% to 90% of rx rf power, from time that - - 800 nsec downloaded from: http:///
data sheet SE5511T: dual band 802.11n wlan/bt front end skyworks solutions, inc. ? phone [781] 376 - 3000 ? fax [781] 376 - 3100 ? sales@skyworksinc.com ? www.skyworksinc.com 202 403 a ? skyworks proprietary information ? products and product information are subject to change without notice ? october 23 , 2012 10 symbol parameter condition min. typ. max. unit len5 is at 50% power detector characteristics conditions: v cc = 3.3 v, t a = 25 c, as measured on skyworks solutions? se551 1t -ek1 evaluation board (de - embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted. symbol parameter condition min. typ. max. unit f out frequency range pen2= hi pen5 = hi 2400 4900 - 2500 5900 mhz pdr power detect range, pe ak power measured at ant 0 - 23 dbm pdz load dc load impedance - - 2.5 k ? pdv p23 output voltage, p out = 23 dbm pen2= hi 0.8 1.0 v pdv p 19 output voltage, p out = 19 dbm pen5 = hi 4950 mhz 5150 - 5850 mhz 0.4 0.5 0.8 1.0 v pdv pnorf output voltage, p out = no rf - - 0.125 - v pd var power detector accuracy vs load vswr pout=2 0 dbm , 2:1 load vswr, any angle -1 + 0.6 db downloaded from: http:///
data sheet SE5511T: dual band 802.11n wlan/bt front end skyworks solutions, inc. ? phone [781] 376 - 3000 ? fax [781] 376 - 3100 ? sales@skyworksinc.com ? www.skyworksinc.com 202 403 a ? skyworks proprietary information ? products and product information are subject to change without notice ? october 23 , 2012 11 package diagram top view bottom view 25 24 23 9 22 1 19 10 11 8 21 2 18 3 17 4 16 5 15 26 6 12 20 13 14 27 28 7 25 24 23 9 22 1 19 10 11 8 21 2 18 3 17 4 16 5 15 26 6 12 20 13 14 27 28 7 figure 3 : package outline drawing branding information figure 4 : SE5511T branding information sige SE5511T lot code pin 1 identifier part number lot code pin 1 e3 terminal finish downloaded from: http:///
data sheet SE5511T: dual band 802.11n wlan/bt front end skyworks solutions, inc. ? phone [781] 376 - 3000 ? fax [781] 376 - 3100 ? sales@skyworksinc.com ? www.skyworksinc.com 202 403 a ? skyworks proprietary information ? products and product information are subject to change without notice ? october 23 , 2012 12 recommended pcb footprint 25 24 23 9 22 1 19 10 11 8 21 2 18 3 17 4 16 5 15 26 6 12 20 13 14 27 28 7 3 25 24 23 9 22 1 19 10 11 8 21 2 18 3 17 4 16 5 15 26 6 12 20 13 14 27 28 7 25 24 23 9 22 1 19 10 11 8 21 2 18 3 17 4 16 5 15 26 6 12 20 13 14 27 28 7 7 21 17 13 27 figure 5 : recommended pcb footprint because of its sensitivity to moisture absorption, instructions on the shipping contai ner label must be followed regarding exposure to moisture after the container seal is broken, otherwise, problems related to m oisture absorption may occur when the part is subjected to high temperature during solder assembly. t he SE5511T i s capable of withstanding a pb free solder reflow. care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. if the part is manually attached, precaution should be taken t o insure that the device is not subjected to temperatures above its rated peak temperature for an extended period of time . for details on both attachment techniques, precautions, and handling procedures recommended, please r efer to: ? ? quad flat no - lead module solder reflow & rework information? , document number qad - 00045 . ? ? handling, packing, shipping and use of moisture sensitive qfn ? , document number qad - 00044 . downloaded from: http:///
data sheet SE5511T: dual band 802.11n wlan/bt front end skyworks solutions, inc. ? phone [781] 376 - 3000 ? fax [781] 376 - 3100 ? sales@skyworksinc.com ? www.skyworksinc.com 202 403 a ? skyworks proprietary information ? products and product information are subject to change without notice ? october 23 , 2012 13 tape and reel information parameter value devices per reel 3000 reel diameter 13 inches tape width 12 millimeters figure 6: SE5511T - r tape and reel information downloaded from: http:///
data sheet SE5511T: dual band 802.11n wlan/bt front end skyworks solutions, inc. ? phone [781] 376 - 3000 ? fax [781] 376 - 3100 ? sales@skyworksinc.com ? www.skyworksinc.com 202 403 a ? skyworks proprietary information ? products and product information are subject to change without notice ? october 23 , 2012 14 document change history revision dat e notes 1.0 august -04- 2010 create d 1.1 april- 07 - 2011 updated functional block diagram 1.2 june - 09 - 2011 updated specifications 1.3 july - 06 - 2011 updated rx2 isolation specification 1.4 november - 22 - 2011 updated specifications 1.5 february - 03 - 2012 update d temperature range, updated tape and reel info 1.6 april- 11 - 2012 updated with skyworks logo and disclaimer statement 1.7 august - 14 - 2012 updated recommended pcb footprint copyright ? 2012 skyworks solutions, inc. all rights reserved. information in this document is provided in connection with skyworks solutio ns, inc. (?skyworks?) products or services. these materials, including the information contained herein, are provided by skyworks as a service to its customers and may be used for informational purposes only by the customer. skyworks assumes no r esponsibility for errors or omissions in these materials or the information contained herein. sky works may change its documentation, products, services, specif ications or product descriptions at any time, without notice. skyworks makes no commitment to update the materia ls or information and shall have no responsibility whatsoever for conflict s, incompatibilities, or other difficulties arising from any future changes. no license, whether exp ress, implied, by estoppel or otherwise, is granted to any intellectua l property rights by this document. skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distr ibution, reproduction or use of skyworks products, information or materials, except as may be provided in skyworks terms and conditions of sale. the materials, products and information are provided ?as is? without warrant y of any kind, whether express, implied, statutor y, or otherwise, i ncluding fitness for a particular purpose or use, merchantability, performance, qual ity or non - infringement of any intellectual property right; all such warranties are hereby expressly disclaimed. skyworks does not warrant the accuracy or completeness of t he information, text, graphics or other items contained within these materials. skyworks shall not be liable for any damages, including but not limited to any special, indirect, incidental, statutory, or consequential damages, including without limitatio n, lost revenues or lost profits that may result from the use of the materials or information, whether or not the recipient of materials has b een advised of the possibility of such damage. skyworks products are not intended for use in medical, lifesaving or life - sustaining applications, or other equipment in which the failure of the skyworks products could lead to personal injury, death, physical or environmental damage. skyworks customers using or selling skyworks products for use in such applicat ions do so at their own risk and agree to fully indemnify skyworks for any damages resulting from such improper use or sale. customers are responsible for their products and applications using sk yworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design s pecifications. customers should include design and operating safeguards to minimize these and other risks. skyworks assumes no liability for applications assistance, customer pr oduct design, or damage to any equipment resulting from the use of skyworks products outside of stated published specifications or parameters. skyworks, the skyworks symbol, and ?breakthrough simplicity? are trademarks or reg istered trademarks of skyworks solution s, inc., in the united states and other countries. third - party brands and names are for identification purposes only, and are the property of their respective owners. additional information, inc luding relevant terms and conditions, posted at www.skyworksin c.com, are incorporated by reference . downloaded from: http:///

▲Up To Search▲

Price & Availability of SE5511T

	To Download SE5511T Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .