technical data sheet sma straight plug 32S107-302L5 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de email: info@rosenberger.de 1 / 2 rf_35/12.04/3.0 all dimensions are in mm; tolerances according to i so 2768 m-h interface according to iec 60169-15; en 122110; mil-std-348 documents assembly instruction 32 b5 material and plating connector parts material plating center contact brass aurodur?, gold plated outer contact cube or equivalent aurodur?, gold pla ted dielectric ptfe gasket silicone coupling nut cube or equivalent gold, 0.1 m crimping ferrule copper gold, 0.1 m
technical data sheet sma straight plug 32S107-302L5 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/12.04/3.0 f(ghz) electrical data impedance 50 w frequency dc to 12.4 ghz vswr 1.05 + 0.01 x f [ghz], dc to 5 ghz insertion loss 0.03 x db, dc to 5 ghz insulation resistance 3 5 x10 3 m w center contact resistance 3 m w outer contact resistance 2 m w test voltage 1000 v rms working voltage 480 v rms power handling (at 20 c, sea level, vswr 1.0) 200 w @ 2 ghz rf-leakage 3 100 db up to 1 ghz - limitations are possible due to the used cable ty pe - mechanical data mating cycles min. 500 coupling nut retention 3 270 n center contact captivation: axial 3 27 n coupling test torque max. 1.7 nm recommended torque 0.8 nm to 1.1 nm environmental data temperature range -65c to +165c thermal shock mil-std-202, meth. 107, cond. b corrosion mil-std-202, meth. 101, cond. b vibration mil-std-202, meth. 204, cond. d shock mil-std-202, meth. 213, cond. i moisture resistance mil-std-202, meth. 106 rohs compliant tooling crimping tool 11w150-000 crimp insert 11w150-102 suitable cables rg 174 a/u, rg 188 a/u, rg 316 /u weight weight 2.95 g/pce draft date approved date rev. engineering change n umber name date rong fang 10/03/04 j_krautenbacher 21.07.16 g00 15 -1629 i_wallner 21.07.16 while the information has been carefully compiled t o the best of our knowledge, nothing is intended as representation or warr anty on our part and no statement herein shall be construed as recommendation to in fringe existing patents. in the effort to improve o ur products, we reserve the right to make changes judg ed to be necessary.
|