eki-5726/i specifcations communications ? standard ieee 802.3, 802.3u, 802.3x, 802.1p, 802.3az, 802.3ab ? lan 10/100/1000base-t(x) ? transmission distance up to 100 m ? transmission speed up to 1000 mbps interface ? connectors 16 x rj45 6-pin removable screw terminal (power & relay) ? led indicators p1, p2, p-fail, loop detection 10/100/1000t(x): link/activity, speed switch properties ? mac table size 8k ? packet buffer size 4.1m bit ? switching capacity 32 gbps ? jumbo frame 9216 bytes power ? power consumption max. 8 w ? power input 12~48 v dc (8.4~52.8 v dc ), redundant dual inputs ? fault output 1 relay output mechanism ? dimensions (w x h x d) 74 x 120 x 84 mm ? enclosure ip30, metal shell with solid mounting kits ? mounting din-rail, wall protection ? reverse polarity present ? overload current present environment ? operating temperature eki-5726: -10~60c (14~140f) eki-5726i: -40~75c (-40~167f) ? storage temperature -40 ~ 85c (-40 ~ 185f) ? operating humidity 10 ~ 95% (non-condensing) ? storage humidity 10 ~ 95% (non-condensing) ? mtbf 2,788,343 hours certifcation ? safety iec/en60950, ul60950, ul508, class 1 division 2, atex ? emi fcc part 15 subpart b class a, en 55011/55022 class a ? ems en 61000-4-2 (level 3) en 61000-4-3 (level 3) en 61000-4-4 (level 3) en 61000-4-5 (level 3) en 61000-4-6 (level 3) en 61000-4-8 (level 3) ? shock iec 60068-2-27 ? freefall iec 60068-2-32 ? vibration iec 60068-2-6 ? communicates with scada software via modbus/tcp ? communicates with nms (networking management system) via snmp ? port-based qos for deterministic data transmission ? -40 ~ 75c operating temperature range (eki-5726i only) ? 12 ~ 48 v dc (8.4 ~ 52.8 v dc ) wide-range power input ? ems level 3 protection for extreme outdoor environments ? ieee 802.3az energy effcient ethernet (eee) ? jumbo frame support (up to 9,216 bytes) ? supports redundant 12 ~ 48 v dc power input and p-fail relay ? loop detection introduction the eki-5726/i is the worlds frst convergence switch for process control and it networking management. this series uses modbus/tcp to communicate with the scada software and snmp to communicate with the nms (networking management system) at the same time, thereby allowing full read control over the devices either for control engineers or for it. the devices come with the port-based qos for deterministic data transmission allows the priority ports to prioritize the traffc coming over those ports and delay the less immediately necessary data over the remaining ports. the eki-5726/i switch uses the highest quality components, to enable the range to operate in temperatures of between -40 and 75c along with ems level 3 protection to repel electromagnetic interface for industrial resistance. rohs compliant 2011/65/eu 16-port gigabit ethernet proview switch all product specifications are subject to change without notice last updated : 5-may-2015 industrial ethernet solutions features
eki-5726/i dimensions unit: mm [inch] eki-5726 eki-5726 15 [0.591] 17.8 [0.701] 41.2 [1.622] 10.9 [0.429] 30.9 [1.215] 12.5 [0.492] 9 [0.354] 33.4 [1.315] 11.1 [0.439] 35.6 [1.400] 84 [3.307] 47 [1.850] 38 [1.496] 16.4 [0.644] 11.7 [0.461] 129.8 [5.110] 129.8 [5.110] 73 [2.874] 93 [3.661] ordering information ? 16-port gigabit ethernet porview switch ? 16-port gigabit ethernet proview switch with wide temperature www.advantech.com/products online download
|
