this is information on a product in full production. june 2014 docid7975 rev 2 1/9 STTH30R06C turbo 2 ultrafast high voltage rectifier datasheet - production data features ? ultrafast switching ? low reverse current ? low thermal resistance ? reduces switching and conduction losses description the STTH30R06C, which is using st turbo 2 600 v technology, is specially suited as boost diode in continuous mode power factor corrections and hard switching conditions. the device is also intended for use as a free wheeling diode in power supplies and other power switching applications. to-247 STTH30R06Cw k a2 a1 table 1. device summary symbol value i f(av) 2 x 15 a v rrm 600 v i rm (typ) 8 a t j 175 c v f (typ) 1.8 v t rr (max) 50 ns www.st.com
characteristics STTH30R06C 2/9 docid7975 rev 2 1 characteristics to evaluate the maximum conduction losses use the following equation: p = 1.16 x i f(av) + 0.0043 i f 2 (rms) table 2. absolute ratings (limiting values, per diode) symbol parameter value unit v rrm repetitive peak reverse voltage 600 v i f(rms) forward rms voltage 30 a i f(av) average forward current per diode per device 15 30 a i fsm surge non repetitive forward current t p = 10 ms sinusoidal 120 a t stg storage temperature range -65 to + 175 c t j maximum operating junction temperature 175 c table 3. thermal parameter symbol parameter value (max) unit r th(j-c) junction to case per diode 1.5 c/w tota l 1. 0 r th(c) coupling 0.5 c/w table 4. static electrical characteristics symbol parameter test conditions min. typ. max. unit i r (1) 1. pulse test: t p = 5 ms, < 2 % reverse leakage current t j = 25 c v r = v rrm 60 a t j = 125 c 70 800 v f (2) 2. pulse test: t p = 380 s, < 2 % forward voltage drop t j = 25 c i f = 15a 2.9 v t j = 125 c 1.4 1.48
docid7975 rev 2 3/9 STTH30R06C characteristics 9 table 5. dynamic electrical characteristics symbol test conditions min. typ. max. unit t rr i f = 0.5 a, i rr = 0.25 a, i r =1 a t j = 25 c 30 ns i f = 1 a, di f /dt = -50 a/s,v r = 30 v 50 i rm i f = 15 a, v r = 400 v, di f /dt = -200 a/s t j = 125 c 7.5 9.0 a s factor 0.15 q rr 220 nc t fr i f = 15 a, di f /dt = 120 a/s v fr = 1.1 x v fmax t j = 25 c 5200 ns v fp 6v
characteristics STTH30R06C 4/9 docid7975 rev 2 figure 1. conduction losses versus average forward current (per leg) figure 2. forward voltage drop versus forward current (per leg) figure 3. relative variation of thermal impedance junction to case versus pulse duration figure 4. peak reverse recovery current versus di f /dt (90% confidence, per leg) figure 5. reverse recovery time versus di f /dt (90% confidence, per leg) figure 6. reverse recovery charges versus di f /dt (90% confidence, per leg)
docid7975 rev 2 5/9 STTH30R06C characteristics 9 figure 7. softness factor versus di f /dt (typical values, per leg) figure 8. relative variations of dynamic parameters versus junction temperature figure 9. transient peak forward voltage versus di f /dt (90% confidence, per leg) figure 10. forward recovery time versus di f /dt (90% confidence, per leg) figure 11. junction capacitance versus reverse voltage applied (typical values, per leg)
package information STTH30R06C 6/9 docid7975 rev 2 2 package information ? epoxy meets ul94, v0 ? lead-free packages in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com . ecopack ? is an st trademark. figure 12. to-247 drawing 0075325_g
docid7975 rev 2 7/9 STTH30R06C package information 9 table 6. to-247 mechanical data dim. mm. min. typ. max. a 4.85 5.15 a1 2.20 2.60 b1.0 1.40 b1 2.0 2.40 b2 3.0 3.40 c 0.40 0.80 d 19.85 20.15 e 15.45 15.75 e 5.30 5.45 5.60 l 14.20 14.80 l1 3.70 4.30 l2 18.50 ? p 3.55 3.65 ? r 4.50 5.50 s 5.30 5.50 5.70
ordering information STTH30R06C 8/9 docid7975 rev 2 3 ordering information 4 revision history table 7. ordering information ordering code marking package weight base qty. delivery mode STTH30R06Cw STTH30R06Cw to-247 4.36 g 30 tube table 8. document revision history date revision changes july-2001 1a last issue 18-jun-2014 2 updated title. ecopack statement updated.
docid7975 rev 2 9/9 STTH30R06C 9 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a particular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. st products are not designed or authorized for use in: (a) safety critical applications such as life supporting, active implanted devices or systems with product functional safety requirements; (b) aeronautic applications; (c) automotive applications or environments, and/or (d) aerospace applications or environments. where st products are not designed for such use, the purchaser shall use products at purchaser?s sole risk, even if st has been informed in writing of such usage, unless a product is expressly designated by st as being intended for ?automotive, automotive safety or medical? industry domains according to st product design specifications. products formally escc, qml or jan qualified are deemed suitable for use in aerospace by the corresponding governmental agency. resale of st products with provisions different from the statem ents and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or register ed trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2014 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - swed en - switzerland - united kingdom - united states of america www.st.com
|
