note: all specifications are subjec t to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: rc0173a doc solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com designer?s data sheet part number/ordering information 1/ spd15 __ hf __ __ screening 2/ __ = not screened tx = tx level txv = txv s = s level package type sms = surface mount square tab gw = gullwing bt = button tab voltage/family 10 = 100v 15 = 150v 20 = 200v SPD1510HF thru spd1520hf series 15 amp hyperfast recovery rectifier 100 200 volts, 30 nsec features: ? hyper fast reverse recovery: 30 nsec maximum 4/ ? high surge current: 450 a maximum ? low forward voltage drop .95 v @15 a ? hermetically sealed, void free construction ? high temperature category i eutectic metallurgical bond ? depending on board configuration, two spd1520hf devices can match the current output of larger and heavier do-4 and to-25x packages ? weight: sms ? 0.45 g (typ), gw ? 0.35 g (typ), bt ? 0.3 g (typ) ? surface mount component s eliminate mounting hardware required for do-4 and to-25x packages ? available in surface mount square tab, gullwing, and button tab versions ? excellent thermal shock performance ? high temperature operation at junction and case temperature of 175c ? tx, txv, and s-level screening available 2/ maximum ratings 3 / rating symbol value unit peak repetitive reverse voltage and dc blocking voltage SPD1510HF spd1515hf spd1520hf v rrm v rwm v r 100 150 200 volts average rectified forward current (sms t ec 100c) 5/ i o 15 amps peak surge current (8.3 ms pulse, half sine wave, superimposed on io, v rwm = rated, allow junction to reach equilibrium between pulses, t a = 25c) i fsm 450 amps operating & storage temperature t j and t stg -65 to +175 c thermal resistance surface mount square tab (sms) gullwing (gw) button tab (bt) r je r jl r jc 3.5 4.5 2.0 c/w notes: 1/ for ordering information, price, operati ng curves, and availability- contact factory. 2/ screening based on mil-prf-19500. sc reening flows available on request. 3/ unless otherwise specified, all electrical characteristics @ 25c. 4/ i f = 1a, i r = 1a, i rr = 0.1a, t a = 25c 5/ operating at higher i o currents may be achieved based on specific application and device mounting if t j is maintained below 175c. surface mount square tab (sms) gullwing (gw) button tab (bt)
note: all specifications are subjec t to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: rc0173a doc electrical characteristics 3 / symbol typ max unit instantaneous forward voltage drop pulsed i f = 6 adc i f = 15 adc i f = 20 adc i f = 15 adc, t a = +125c i f = 15 adc, t a = +150c i f = 15 adc, t a = -55c v f1 v f2 v f3 v f4 v f5 v f6 -- 0.90 -- -- -- -- 0.86 0.95 1.00 0.90 0.86 1.20 vdc reverse leakage current at rated v r , 300 s pulse t a = +25c t a = +125c t a = +150c i r1 i r2 i r3 0.1 15 50 2 100 500 a a a breakdown voltage i r = 100 a SPD1510HF spd1515hf spd1520hf bv r -- -- -- 110 160 210 v junction capacitance v r = 10 vdc, f = 1 mhz c j 110 150 pf reverse recovery time i f = 0.5 a, i r = 1 a, i rr = 0.25 a t rr -- 30 nsec surface mount square tab (sms) gullwing (gw) dimensions (inches) dimensions (inches) dim min max dim min max a .157 .162 ?a .135 .155 b .130 .175 b .090 .115 c .020 .030 c .060 .100 d .002 -- d .150 .200 e .002 -- f .020 .028 g .090 .130 button tab (bt) dimensions (in) dim min max a .080 .115 a1 -- .020 ?b .135 .155 c .175 .195 c1 .265 ref p1 .090 .115 p2 .055 .075 p3 .090 .110 p4 .060 ref t .008 .012 r .015 ref solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SPD1510HF thru spd1520hf series
|