SMC5K10A thru smc5k85a www.vishay.com vishay general semiconductor revision: 06-apr-17 1 document number: 87742 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 surface mount t rans z orb ? transient voltage suppressors typical applications use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ics, mosfet, signal lines of sensor units for consumer, computer, industrial, automo tive, and telecommunication. features ? available in uni-directional polarity only ? 5000 w peak pulse power capability with a 10/1000 s waveform ? excellent clamping capability ? very fast response time ? low incremental surge resistance ? meets msl level 1, per j-std-020, lf maximum peak of 260 c ? aec-q101 qualified - automotive ordering code: base p/nhm3 ? for SMC5K10A to smc5k20a ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 mechanical data case: smc (do-214ab) ? molding compound meets ul 94 v-0 flammabi lity rating ? base p/n-m3 - halogen-free, rohs-compliant ? base p/nhm3 - halogen-free, rohs-compliant, and aec-q101 qualified terminals: matte tin plated leads, solderable per j-std-002 and jesd 22-b102 ? m3 suffix meets jesd 201 class 2 whisker test, hm3 suffix meets jesd 201 class 2 whisker test note ? smc5k22a to smc5k85a for industrial grade only polarity: color band denoted cathode end note (1) non-repetitive current pulse, per fig. 3 and derated above t a = 25 c, per fig. 2 primary characteristics v br 11.1 v to 104 v v wm 10 v to 85 v p ppm 5000 w t j max. 150 c polarity uni-directional package smc (do-214ab) smc (do-214ab) maximum ratings (t a = 25 c unless otherwise noted) parameter symbol value unit peak pulse power dissipation with a 10/1000 s wave form (fig. 1) p ppm (1) 5000 w peak pulse current with a 10/1000 s wavefo rm (fig 3.) i ppm (1) see next table a operating junction and storage temperature range t j , t stg -55 to +150 c
SMC5K10A thru smc5k85a www.vishay.com vishay general semiconductor revision: 06-apr-17 2 document number: 87742 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes (1) pulse test: t p ? 50 ms (2) surge current waveform per fig. 3 and derated per fig.2 (3) all terms and symbols are cons istent with ansi/ieee c62.35 note (1) aec-q101 qualified, available fo r SMC5K10A to smc5k20a only electrical characteristics (t a = 25 c unless otherwise noted) device type device marking code breakdown voltage v br (1) (v) at i t test current i t (ma) stand-off voltage v wm (v) maximum reverse leakage at v wm i d (a) max. peak pulse surge current i ppm (2) (a) maximum clamping voltage at i ppm v c (v) min. max. SMC5K10A 5gdx 11.1 12.3 1.0 10 10.0 294 17.0 smc5k12a 5gee 13.3 14.7 1.0 12 5.0 251 19.9 smc5k13a 5geg 14.4 15.9 1.0 13 2.0 233 21.5 smc5k14a 5gek 15.6 17.2 1.0 14 2.0 216 23.2 smc5k15a 5gem 16.7 18.5 1.0 15 2.0 205 24.4 smc5k16a 5gep 17.8 19.7 1.0 16 2.0 192 26.0 smc5k17a 5ger 18.9 20.9 1.0 17 2.0 181 27.6 smc5k18a 5get 20.0 22.1 1.0 18 2.0 171 29.2 smc5k20a 5gev 22.2 24.5 1.0 20 2.0 154 32.4 smc5k22a 5gex 24.4 26.9 1.0 22 1.0 141 35.5 smc5k24a 5gez 26.7 29.5 1.0 24 1.0 129 38.9 smc5k26a 5gfe 28.9 31.9 1.0 26 1.0 119 42.1 smc5k28a 5gfg 31.1 34.4 1.0 28 1.0 110 45.4 smc5k30a 5gfk 33.3 36.8 1.0 30 1.0 103 48.4 smc5k33a 5gfm 36.7 40.6 1.0 33 1.0 93.8 53.3 smc5k36a 5gfp 40.0 44.2 1.0 36 1.0 86.1 58.1 smc5k40a 5gfr 44.4 49.1 1.0 40 1.0 77.5 64.5 smc5k43a 5gft 47.8 52.8 1.0 43 1.0 72.0 69.4 smc5k45a 5gfv 50.0 55.3 1.0 45 1.0 68.8 72.7 smc5k48a 5gfx 53.3 58.9 1.0 48 1.0 64.6 77.4 smc5k51a 5gfz 56.7 62.7 1.0 51 1.0 60.7 82.4 smc5k54a 5gge 60.0 66.3 1.0 54 1.0 57.4 87.1 smc5k58a 5ggg 64.4 71.2 1.0 58 1.0 53.4 93.6 smc5k60a 5ggk 66.7 73.7 1.0 60 1.0 51.7 96.8 smc5k64a 5ggm 71.1 78.6 1.0 64 1.0 48.5 103 smc5k70a 5ggp 77.8 86.0 1.0 70 1.0 44.2 113 smc5k75a 5ggr 83.3 92.1 1.0 75 1.0 41.3 121 smc5k78a 5ggt 86.7 95.8 1.0 78 1.0 39.7 126 smc5k85a 5ggv 94.4 104 1.0 85 1.0 36.5 137 immunity to static electrical discharge to the following standards ? (t a = 25 c unless otherwise noted) standard test type test conditions symbol class value iec 61000-4-2 human body model (contact mode) c = 150 pf, r = 330 ? esd 4 > 8 kv human body model (air discharge mode) > 15 kv ordering information (example) preferred p/n unit weight (g) preferred package code base quantity delivery mode SMC5K10A-m3/h 0.257 h 850 7" diam eter plastic tape and reel SMC5K10A-m3/i 0.257 i 3500 13" diam eter plastic tape and reel SMC5K10Ahm3/h (1) 0.257 h 850 7" diameter plastic tape and reel SMC5K10Ahm3/i (1) 0.257 i 3500 13" diameter plastic tape and reel
SMC5K10A thru smc5k85a www.vishay.com vishay general semiconductor revision: 06-apr-17 3 document number: 87742 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ratings and characteristics curves (t a = 25 c unless otherwise noted) fig. 1 - peak pulse power derating curve fig. 2 - pulse power or current vs. initial junction temperature fig. 3 - pulse waveform fig. 4 - typical j unction capacitance notes ? fig.1 - power calculat ions is based on i ppm times defined maximum clampi ng voltage by pulse width ? fig.1 - 10 000 s p ppm is actual test for v wm ? 60 v types, over 60 v types 10 000 s p ppm is curve extensional value 0.1 1 10 100 10 100 1000 10 000 p ppm - peak pul s e power (kw) t d -pul s e width ( s ) 0 25 50 75 100 0 25 50 75 100 125 150 peak pul s e power (p pp ) or current (i pp ) derating in percentage, % t j - initial temperature ( c) 0 50 100 150 01.02.03.04.0 i ppm - peak pul s e current, % i r s m t p -time (m s ) t j = 25 c pul s e width (t d ) i s a s the point where the peak current decay s to 50 % of i ppm t d t r = 10 s peak value i ppm half value - i pp /2 10/1000 s waveform a s s e s tand-off voltage (v) mea s ured at s tand-off voltage, v wm t j = 25 c f = 1.0 mhz mea s ured at zero bia s
SMC5K10A thru smc5k85a www.vishay.com vishay general semiconductor revision: 06-apr-17 4 document number: 87742 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package outline dimensions in inches (millimeters) 0.260 (6.60) 0.280 (7.11) 0.006 (0.152) 0.012 (0.305) 0.030 (0.76) 0.060 (1.52) 0.008 (0.2) 0.305 (7.75) 0.320 (8.13) 0.220 (5.59) 0.246 (6.22) 0.079 (2.06) 0.103 (2.62) 0.114 (2.90) 0.126 (3.20) smc (do-214ab) 0.320 ref. mounting pad layout 0 (0) 0.185 (4.69) max. 0.126 (3.20) min. 0.060 (1.52) min.
legal disclaimer notice www.vishay.com vishay revision: 08-feb-17 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners. ? 2017 vishay intertechnology, inc. all rights reserved
|
