notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com page 1 of 1 pcb land pattern suggested l a yout, t o l e r a n c e t o b e w i t h i n . 0 0 2 a bcd e fg .450 .803 -- .100 .250 .102 .100 11.43 20.40 -- 2.54 6.35 2.59 2.54 h j k l wt .047 .065 .065 .470 grams 1.19 1.65 1.65 11.94 3.0 JSPQ-80 total loss 2.8 3.2 3.6 4.0 4.4 4.8 10 24 38 52 66 80 frequency (mhz) total loss (db) s-1(db) s-2(db) typical performance data electrical specifcations maximum ratings pin connections sum port 1 port 1 (0) 7 port 2 (+90) 8 ground 2,3,4,5,6,9,10,11,12,13,14 operating temperature -40c to 85c storage temperature -55c to 100c power input (as a splitter) 1w max. internal dissipation 0.125w max. JSPQ-80+ JSPQ-80 2 way-90 50 ? 10 to 80 mhz power splitter/combiner rev. d m151107 JSPQ-80 lc/td/cp/am 150818 surface mount features ? low insertion loss, 0.45 db typ. ? excellent isolation, 44 db typ. ? aqueous washable applications ? hf/vhf ? radio communications ? instrumentation JSPQ-80 isolation 40 44 48 52 56 60 10 24 38 52 66 80 frequency (mhz) isolation (db) JSPQ-80 phase unbalance 87 88 89 90 91 92 10 24 38 52 66 80 frequency (mhz) phase unbalance (deg.) electrical schematic outline drawing outline dimensions ( ) inch mm demo board mcl p/n: tb-217 suggested pcb layout (pl-099) frequency (mhz) total loss 1 (db) amplitude unbalance (db) isolation (db) phase unbalance (deg.) vswr s vswr 1 vswr 2 s-1 s-2 10.00 3.39 3.30 0.09 42.13 90.42 1.10 1.17 1.20 14.00 3.43 3.31 0.12 43.44 89.83 1.08 1.10 1.12 18.00 3.47 3.32 0.14 45.30 89.52 1.07 1.06 1.03 24.00 3.53 3.37 0.16 48.41 89.99 1.09 1.09 1.09 30.00 3.60 3.43 0.17 51.93 90.81 1.12 1.15 1.21 36.00 3.66 3.50 0.16 51.78 91.44 1.15 1.22 1.31 41.00 3.70 3.55 0.15 52.57 91.62 1.19 1.27 1.38 44.00 3.73 3.57 0.16 52.89 91.62 1.21 1.29 1.41 47.00 3.75 3.59 0.16 51.91 91.51 1.22 1.32 1.45 50.00 3.79 3.62 0.17 50.75 91.47 1.24 1.35 1.47 56.00 3.86 3.68 0.18 48.51 90.90 1.26 1.40 1.51 64.00 3.94 3.72 0.22 44.54 90.12 1.29 1.48 1.52 70.00 3.99 3.72 0.27 42.59 89.31 1.32 1.53 1.52 74.00 4.02 3.73 0.29 41.55 88.65 1.34 1.57 1.51 80.00 4.07 3.75 0.32 40.38 87.72 1.36 1.62 1.49 permanent damage may occur if any of these limits are exceeded. 1. total loss = insertion loss + 3db splitter loss. case style: bk276 freq. range (mhz) isolation (db) insertion loss (db) avg. of coupled outputs above 3 db phase unbalance (degrees) amplitude unbalance (db) f l -f u ty p. min. ty p. max. max. max. 10-80 44 30 0.45 1.4 6 0.6 +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
|