View XPGBWT-L1-0000-00F50_9011826.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

cld-ds51 rev 12 e cree ? xlamp ? xp-g2 leds pro duc t d escrip tion the xlamp ? xp-g2 l e d builds on the unprecedented performance of the original xp-g by increasing lumen output up to 20% while providing a single die l ed point source for precise optical control. the xp-g2 l e d shares the same footprint as the original xp-g, providing a seamless upgrade path and shortening the design cycle. xlamp xp-g2 l e ds are the ideal choice for lighting applications where high light output and maximum effcacy are required, such as l e d light bulbs, outdoor lighting, portable lighting, indoor lighting and solar-powered lighting. fea tures ? available in white, outdoor white and 80-, 85- and 90-cri white ? ansi-compatible chromaticity bins ? binned at 85?c ? maximum drive current: 1500?ma ? low thermal resistance: 4?c/w ? wide viewing angle: 115 ? unlimited foor life at 30?oc/85% rh ? refow solderable - jedec j -std-020c ? e lectrically neutral thermal path ? rohs and reach compliant ? ul ? recognized component (e349212) ta ble o f cont e nts characteristics ............................................ 2 flux characteristics .................................... 3 relative spectral power distribution ...... 10 relative flux vs. junction temperature .. 10 e lectrical characteristics ......................... 11 relative flux vs. current .......................... 11 relative chromaticity vs current and temperature ............................................. 12 typical spatial distribution ...................... 13 thermal design ........................................ 13 performance groups C luminous flux ... 14 performance groups C chromaticity ...... 15 crees standard chromaticity regions plotted on the 1931 cie curve ................ 18 crees standard cool white kits plotted on ansi standard chromaticity regions ..................................................... 20 crees standard warm and neutral white kits plotted on ansi standard chromaticity regions .............................. 21 crees standard chromaticity kits .......... 23 bin and order code formats ................... 24 refow soldering characteristics ............ 25 notes ........................................................ 26 mechanical dimensions .......................... 28 tape and reel ........................................... 29 packaging ................................................. 30 product family data sheet copyright ? 2012-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 www. cr ee. c om/x lamp
2 ch ar ac teristics characteristics unit minimum t ypical maximum thermal resistance, junction to solder point c/w 4 viewing angle (fwhm) degrees 115 temperature coeffcient of voltage mv/c -1.8 esd withstand voltage (hbm per mil-std-883d) v 8000 dc forward current ma 1500 reverse voltage v 5 forward voltage (@ 350?ma, 85 c) v 2.8 3.15 forward voltage (@ 700?ma, 85 c) v 2.9 forward voltage (@ 1000?ma, 85 c) v 3.0 forward voltage (@ 1500?ma, 85 c) v 3.1 le d junction temperature c 150 copyright ? 2012-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -g2 led
3 notes ? cree maintains a tolerance of 7% on fux and power measurements, 0.005 on chromaticity (ccx, ccy) measurements and a tolerance of 2 on cri measurements. see the measurements section (page 26). ? cree xlamp xp-g2 led order codes specify only a minimum fux bin and not a maximum. cree may ship reels in fux bins higher than the minimum specifed by the order code without advance notice. shipments will always adhere to the chromaticity bin restrictions specifed by the order code. * flux values @ 25?c are calculated and for reference only. fl ux ch ar ac teristic s ( t j = 85?c) the following table provides order codes for xlamp xp-g l e ds. for a complete description of the order code nomenclature, please see the bin and order code formats section (page 24). for defnitions of the chromaticity kits, please see the crees standard chromaticity kits section (page 23). chromaticity minimum luminous flux (lm) @ 350?ma o rder codes kit cc t code flux (lm) @ 85? c flux (lm) @ 25?c* 70 c ri t ypical 51 6200 k s4 164 180 xpgbwt-l1-0000-00l51 s3 156 171 xpgbwt-l1-0000-00k51 s2 148 163 xpgbwt-l1-0000-00j51 r5 139 153 xpgbwt-l1-0000-00h51 r4 130 143 xpgbwt-l1-0000-00g51 r3 122 134 xpgbwt-l1-0000-00f51 53 6000 k s4 164 180 xpgbwt-l1-0000-00l53 s3 156 171 xpgbwt-l1-0000-00k53 s2 148 163 xpgbwt-l1-0000-00j53 r5 139 153 xpgbwt-l1-0000-00h53 r4 130 143 xpgbwt-l1-0000-00g53 r3 122 134 xpgbwt-l1-0000-00f53 50 6200 k s4 164 180 xpgbwt-l1-0000-00l50 s3 156 171 xpgbwt-l1-0000-00k50 s2 148 163 xpgbwt-l1-0000-00j50 r5 139 153 xpgbwt-l1-0000-00h50 r4 130 143 xpgbwt-l1-0000-00g50 r3 122 134 XPGBWT-L1-0000-00F50 e1 6500 k s4 164 180 xpgbwt-l1-0000-00le1 s3 156 171 xpgbwt-l1-0000-00ke1 s2 148 163 xpgbwt-l1-0000-00je1 r5 139 153 xpgbwt-l1-0000-00he1 r4 130 143 xpgbwt-l1-0000-00ge1 r3 122 134 xpgbwt-l1-0000-00fe1 copyright ? 2012-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -g2 led
4 notes ? cree maintains a tolerance of 7% on fux and power measurements, 0.005 on chromaticity (ccx, ccy) measurements and a tolerance of 2 on cri measurements. see the measurements section (page 26). ? cree xlamp xp-g2 led order codes specify only a minimum fux bin and not a maximum. cree may ship reels in fux bins higher than the minimum specifed by the order code without advance notice. shipments will always adhere to the chromaticity bin restrictions specifed by the order code. * flux values @ 25?c are calculated and for reference only. chromaticity minimum luminous flux (lm) @ 350?ma o rder codes kit cc t code flux (lm) @ 85? c flux (lm) @ 25?c* 70 c ri t ypical e2 5700 k s4 164 180 xpgbwt-l1-0000-00le2 s3 156 171 xpgbwt-l1-0000-00ke2 s2 148 163 xpgbwt-l1-0000-00je2 r5 139 153 xpgbwt-l1-0000-00he2 r4 130 143 xpgbwt-l1-0000-00ge2 r3 122 134 xpgbwt-l1-0000-00fe2 chromaticity minimum luminous flux (lm) @ 350?ma o rder codes kit cc t code flux (lm) @ 85? c flux (lm) @25?c* 70 c ri t ypical 75 c ri t ypical 80 cri minimum e3 5000 k s4 164 180 xpgbwt-01-0000-00le3 s3 156 171 xpgbwt-01-0000-00ke3 s2 148 163 xpgbwt-01-0000-00je3 xpgbwt-l1-0000-00je3 r5 139 153 xpgbwt-01-0000-00he3 xpgbwt-l1-0000-00he3 r4 130 143 xpgbwt-01-0000-00ge3 xpgbwt-l1-0000-00ge3 r3 122 134 xpgbwt-01-0000-00fe3 xpgbwt-l1-0000-00fe3 r2 114 125 xpgbwt-01-0000-00ee3 xpgbwt-l1-0000-00ee3 q5 107 118 xpgbwt-l1-0000-00de3 f4 4750 k s4 164 180 xpgbwt-01-0000-00lf4 s3 156 171 xpgbwt-01-0000-00kf4 s2 148 163 xpgbwt-01-0000-00jf4 xpgbwt-l1-0000-00jf4 r5 139 153 xpgbwt-01-0000-00hf4 xpgbwt-l1-0000-00hf4 r4 130 143 xpgbwt-01-0000-00gf4 xpgbwt-l1-0000-00gf4 r3 122 134 xpgbwt-01-0000-00ff4 xpgbwt-l1-0000-00ff4 r2 114 125 xpgbwt-01-0000-00ef4 xpgbwt-l1-0000-00ef4 q5 107 118 xpgbwt-l1-0000-00df4 fl ux ch ar ac teristic s ( t j = 85?c) - continued copyright ? 2012-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -g2 led
5 notes ? cree maintains a tolerance of 7% on fux and power measurements, 0.005 on chromaticity (ccx, ccy) measurements and a tolerance of 2 on cri measurements. see the measurements section (page 26). ? cree xlamp xp-g2 led order codes specify only a minimum fux bin and not a maximum. cree may ship reels in fux bins higher than the minimum specifed by the order code without advance notice. shipments will always adhere to the chromaticity bin restrictions specifed by the order code. * flux values @ 25?c are calculated and for reference only. chromaticity minimum luminous flux (lm) @ 350?ma o rder codes kit cc t code flux (lm) @ 85? c flux (lm) @25?c* 70 c ri t ypical 75 c ri t ypical 80 cri minimum e4 4500 k s4 164 180 xpgbwt-01-0000-00le4 s3 156 171 xpgbwt-01-0000-00ke4 s2 148 163 xpgbwt-01-0000-00je4 xpgbwt-l1-0000-00je4 r5 139 153 xpgbwt-01-0000-00he4 xpgbwt-l1-0000-00he4 r4 130 143 xpgbwt-01-0000-00ge4 xpgbwt-l1-0000-00ge4 r3 122 134 xpgbwt-01-0000-00fe4 xpgbwt-l1-0000-00fe4 r2 114 125 xpgbwt-01-0000-00ee4 xpgbwt-l1-0000-00ee4 q5 107 118 xpgbwt-l1-0000-00de4 f5 4250 k s4 164 180 xpgbwt-01-0000-00lf5 s3 156 171 xpgbwt-01-0000-00kf5 s2 148 163 xpgbwt-01-0000-00jf5 xpgbwt-l1-0000-00jf5 r5 139 153 xpgbwt-01-0000-00hf5 xpgbwt-l1-0000-00hf5 r4 130 143 xpgbwt-01-0000-00gf5 xpgbwt-l1-0000-00gf5 r3 122 134 xpgbwt-01-0000-00ff5 xpgbwt-l1-0000-00ff5 r2 114 125 xpgbwt-01-0000-00ef5 xpgbwt-l1-0000-00ef5 q5 107 118 xpgbwt-l1-0000-00df5 e5 4000 k s4 164 180 xpgbwt-01-0000-00le5 s3 156 171 xpgbwt-01-0000-00ke5 s2 148 163 xpgbwt-01-0000-00je5 xpgbwt-l1-0000-00je5 r5 139 153 xpgbwt-01-0000-00he5 xpgbwt-l1-0000-00he5 xpgbwt-h1-0000-00he5 r4 130 143 xpgbwt-01-0000-00ge5 xpgbwt-l1-0000-00ge5 xpgbwt-h1-0000-00ge5 r3 122 134 xpgbwt-01-0000-00fe5 xpgbwt-l1-0000-00fe5 xpgbwt-h1-0000-00fe5 r2 114 125 xpgbwt-01-0000-00ee5 xpgbwt-l1-0000-00ee5 xpgbwt-h1-0000-00ee5 q5 107 118 xpgbwt-l1-0000-00de5 xpgbwt-h1-0000-00de5 z5 4000 k r5 139 153 xpgbwt-l1-0000-00hz5 xpgbwt-h1-0000-00hz5 r4 130 143 xpgbwt-l1-0000-00gz5 xpgbwt-h1-0000-00gz5 r3 122 134 xpgbwt-l1-0000-00fz5 xpgbwt-h1-0000-00fz5 r2 114 125 xpgbwt-l1-0000-00ez5 xpgbwt-h1-0000-00ez5 q5 107 118 xpgbwt-l1-0000-00dz5 xpgbwt-h1-0000-00dz5 fl ux ch ar ac teristic s ( t j = 85?c) - continued copyright ? 2012-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -g2 led
6 notes ? cree maintains a tolerance of 7% on fux and power measurements, 0.005 on chromaticity (ccx, ccy) measurements and a tolerance of 2 on cri measurements. see the measurements section (page 26). ? cree xlamp xp-g2 led order codes specify only a minimum fux bin and not a maximum. cree may ship reels in fux bins higher than the minimum specifed by the order code without advance notice. shipments will always adhere to the chromaticity bin restrictions specifed by the order code. * flux values @ 25?c are calculated and for reference only. fl ux ch ar ac teristic s ( t j = 85?c) - continued chromaticity minimum luminous flux (lm) @ 350?ma o rder codes kit cc t code flux (lm) @ 85? c flux (lm) @25?c* 70 c ri t ypical 80 c ri t ypical 80 cri minimum 85 cri minimum 90 cri minimum f6 3750 k s2 148 163 xpgbwt-01-0000- 00jf6 r5 139 153 xpgbwt-01-0000- 00hf6 xpgbwt-l1-0000- 00hf6 xpgbwt-h1-0000- 00hf6 r4 130 143 xpgbwt-01-0000- 00gf6 xpgbwt-l1-0000- 00gf6 xpgbwt-h1-0000- 00gf6 r3 122 134 xpgbwt-01-0000- 00ff6 xpgbwt-l1-0000- 00ff6 xpgbwt-h1-0000- 00ff6 r2 114 125 xpgbwt-01-0000- 00ef6 xpgbwt-l1-0000- 00ef6 xpgbwt-h1-0000- 00ef6 q5 107 118 xpgbwt-01-0000- 00df6 xpgbwt-l1-0000- 00df6 xpgbwt-h1-0000- 00df6 e6 3500 k s2 148 163 xpgbwt-01-0000- 00je6 r5 139 153 xpgbwt-01-0000- 00he6 xpgbwt-l1-0000- 00he6 xpgbwt-h1-0000- 00he6 r4 130 143 xpgbwt-01-0000- 00ge6 xpgbwt-l1-0000- 00ge6 xpgbwt-h1-0000- 00ge6 r3 122 134 xpgbwt-01-0000- 00fe6 xpgbwt-l1-0000- 00fe6 xpgbwt-h1-0000- 00fe6 r2 114 125 xpgbwt-01-0000- 00ee6 xpgbwt-l1-0000- 00ee6 xpgbwt-h1-0000- 00ee6 q5 107 118 xpgbwt-01-0000- 00de6 xpgbwt-l1-0000- 00de6 xpgbwt-h1-0000- 00de6 z6 3500 k r4 130 143 xpgbwt-l1-0000- 00gz6 xpgbwt-h1-0000- 00gz6 r3 122 134 xpgbwt-l1-0000- 00fz6 xpgbwt-h1-0000- 00fz6 r2 114 125 xpgbwt-l1-0000- 00ez6 xpgbwt-h1-0000- 00ez6 q5 107 118 xpgbwt-l1-0000- 00dz6 xpgbwt-h1-0000- 00dz6 copyright ? 2012-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -g2 led
7 notes ? cree maintains a tolerance of 7% on fux and power measurements, 0.005 on chromaticity (ccx, ccy) measurements and a tolerance of 2 on cri measurements. see the measurements section (page 26). ? cree xlamp xp-g2 led order codes specify only a minimum fux bin and not a maximum. cree may ship reels in fux bins higher than the minimum specifed by the order code without advance notice. shipments will always adhere to the chromaticity bin restrictions specifed by the order code. * flux values @ 25?c are calculated and for reference only. chromaticity minimum luminous flux (lm) @ 350?ma o rder codes kit cc t code flux (lm) @ 85? c flux (lm) @25?c* 70 c ri t ypical 80 c ri t ypical 80 cri minimum 85 cri minimum 90 cri minimum f7 3250 k s2 148 163 xpgbwt-01-0000- 00jf7 r5 139 153 xpgbwt-01-0000- 00hf7 xpgbwt-l1-0000- 00hf7 xpgbwt-h1-0000- 00hf7 r4 130 143 xpgbwt-01-0000- 00gf7 xpgbwt-l1-0000- 00gf7 xpgbwt-h1-0000- 00gf7 r3 122 134 xpgbwt-01-0000- 00ff7 xpgbwt-l1-0000- 00ff7 xpgbwt-h1-0000- 00ff7 r2 114 125 xpgbwt-01-0000- 00ef7 xpgbwt-l1-0000- 00ef7 xpgbwt-h1-0000- 00ef7 q5 107 118 xpgbwt-l1-0000- 00df7 xpgbwt-h1-0000- 00df7 e7 3000 k s2 148 163 xpgbwt-01-0000- 00je7 r5 139 153 xpgbwt-01-0000- 00he7 xpgbwt-l1-0000- 00he7 xpgbwt-h1-0000- 00he7 r4 130 143 xpgbwt-01-0000- 00ge7 xpgbwt-l1-0000- 00ge7 xpgbwt-h1-0000- 00ge7 r3 122 134 xpgbwt-01-0000- 00fe7 xpgbwt-l1-0000- 00fe7 xpgbwt-h1-0000- 00fe7 r2 114 125 xpgbwt-01-0000- 00ee7 xpgbwt-l1-0000- 00ee7 xpgbwt-h1-0000- 00ee7 xpgbwt-p1-0000- 00ee7 xpgbwt-u1-0000- 00ee7 q5 107 118 xpgbwt-l1-0000- 00de7 xpgbwt-h1-0000- 00de7 xpgbwt-p1-0000- 00de7 xpgbwt-u1-0000- 00de7 q4 100 110 xpgbwt-l1-0000- 00ce7 xpgbwt-h1-0000- 00ce7 xpgbwt-p1-0000- 00ce7 xpgbwt-u1-0000- 00ce7 q3 93.9 103 xpgbwt-p1-0000- 00be7 xpgbwt-u1-0000- 00be7 q2 87.4 96.1 xpgbwt-p1-0000- 00ae7 xpgbwt-u1-0000- 00ae7 p4 80.6 88.6 xpgbwt-p1-0000- 009e7 xpgbwt-u1-0000- 009e7 p3 73.9 81.2 xpgbwt-p1-0000- 008e7 xpgbwt-u1-0000- 008e7 fl ux ch ar ac teristic s ( t j = 85?c) - continued copyright ? 2012-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -g2 led
8 notes ? cree maintains a tolerance of 7% on fux and power measurements, 0.005 on chromaticity (ccx, ccy) measurements and a tolerance of 2 on cri measurements. see the measurements section (page 26). ? cree xlamp xp-g2 led order codes specify only a minimum fux bin and not a maximum. cree may ship reels in fux bins higher than the minimum specifed by the order code without advance notice. shipments will always adhere to the chromaticity bin restrictions specifed by the order code. * flux values @ 25?c are calculated and for reference only. chromaticity minimum luminous flux (lm) @ 350?ma o rder codes kit cc t code flux (lm) @ 85? c flux (lm) @25?c* 70 c ri t ypical 80 c ri t ypical 80 cri minimum 85 cri minimum 90 cri minimum z7 3000 k r4 130 143 xpgbwt-l1-0000- 00gz7 xpgbwt-h1-0000- 00gz7 r3 122 134 xpgbwt-l1-0000- 00fz7 xpgbwt-h1-0000- 00fz7 r2 114 125 xpgbwt-l1-0000- 00ez7 xpgbwt-h1-0000- 00ez7 q5 107 118 xpgbwt-l1-0000- 00dz7 xpgbwt-h1-0000- 00dz7 xpgbwt-p1-0000- 00dz7 xpgbwt-u1-0000- 00dz7 q4 100 110 xpgbwt-l1-0000- 00cz7 xpgbwt-h1-0000- 00cz7 xpgbwt-p1-0000- 00cz7 xpgbwt-u1-0000- 00cz7 q3 93.9 103 xpgbwt-p1-0000- 00bz7 xpgbwt-u1-0000- 00bz7 q2 87.4 96.1 xpgbwt-p1-0000- 00az7 xpgbwt-u1-0000- 00az7 p4 80.6 88.6 xpgbwt-p1-0000- 009z7 xpgbwt-u1-0000- 009z7 p3 73.9 81.2 xpgbwt-p1-0000- 008z7 xpgbwt-u1-0000- 008z7 f8 2850 k r4 130 143 xpgbwt-l1-0000- 00gf8 xpgbwt-h1-0000- 00gf8 r3 122 134 xpgbwt-l1-0000- 00ff8 xpgbwt-h1-0000- 00ff8 r2 114 125 xpgbwt-l1-0000- 00ef8 xpgbwt-h1-0000- 00ef8 q5 107 118 xpgbwt-l1-0000- 00df8 xpgbwt-h1-0000- 00df8 xpgbwt-p1-0000- 00df8 xpgbwt-u1-0000- 00df8 q4 100 110 xpgbwt-l1-0000- 00cf8 xpgbwt-h1-0000- 00cf8 xpgbwt-p1-0000- 00cf8 xpgbwt-u1-0000- 00cf8 q3 93.9 103 xpgbwt-l1-0000- 00bf8 xpgbwt-h1-0000- 00bf8 xpgbwt-p1-0000- 00bf8 xpgbwt-u1-0000- 00bf8 q2 87.4 96.1 xpgbwt-p1-0000- 00af8 xpgbwt-u1-0000- 00af8 p4 80.6 88.6 xpgbwt-p1-0000- 009f8 xpgbwt-u1-0000- 009f8 p3 73.9 81.2 xpgbwt-p1-0000- 008f8 xpgbwt-u1-0000- 008f8 p2 67.2 73.9 xpgbwt-p1-0000- 007f8 xpgbwt-u1-0000- 007f8 fl ux ch ar ac teristic s ( t j = 85?c) - continued copyright ? 2012-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -g2 led
9 notes ? cree maintains a tolerance of 7% on fux and power measurements, 0.005 on chromaticity (ccx, ccy) measurements and a tolerance of 2 on cri measurements. see the measurements section (page 26). ? cree xlamp xp-g2 led order codes specify only a minimum fux bin and not a maximum. cree may ship reels in fux bins higher than the minimum specifed by the order code without advance notice. shipments will always adhere to the chromaticity bin restrictions specifed by the order code. * flux values @ 25?c are calculated and for reference only. chromaticity minimum luminous flux (lm) @ 350?ma o rder codes kit cc t code flux (lm) @ 85? c flux (lm) @25?c* 70 c ri t ypical 80 c ri t ypical 80 cri minimum 85 cri minimum 90 cri minimum e8 2700 k r4 130 143 xpgbwt-l1-0000- 00ge8 xpgbwt-h1-0000- 00ge8 r3 122 134 xpgbwt-l1-0000- 00fe8 xpgbwt-h1-0000- 00fe8 r2 114 125 xpgbwt-l1-0000- 00ee8 xpgbwt-h1-0000- 00ee8 q5 107 118 xpgbwt-l1-0000- 00de8 xpgbwt-h1-0000- 00de8 q4 100 110 xpgbwt-l1-0000- 00ce8 xpgbwt-h1-0000- 00ce8 xpgbwt-p1-0000- 00ce8 xpgbwt-u1-0000- 00ce8 q3 93.9 103 xpgbwt-l1-0000- 00be8 xpgbwt-h1-0000- 00be8 xpgbwt-p1-0000- 00be8 xpgbwt-u1-0000- 00be8 q2 87.4 96.1 xpgbwt-p1-0000- 00ae8 xpgbwt-u1-0000- 00ae8 p4 80.6 88.6 xpgbwt-p1-0000- 009e8 xpgbwt-u1-0000- 009e8 p3 73.9 81.2 xpgbwt-p1-0000- 008e8 xpgbwt-u1-0000- 008e8 p2 67.2 73.9 xpgbwt-p1-0000- 007e8 xpgbwt-u1-0000- 007e8 z8 2700 k r3 122 134 xpgbwt-l1-0000- 00fz8 xpgbwt-h1-0000- 00fz8 r2 114 125 xpgbwt-l1-0000- 00ez8 xpgbwt-h1-0000- 00ez8 q5 107 118 xpgbwt-l1-0000- 00dz8 xpgbwt-h1-0000- 00dz8 q4 100 110 xpgbwt-l1-0000- 00cz8 xpgbwt-h1-0000- 00cz8 q3 93.9 103 xpgbwt-l1-0000- 00bz8 xpgbwt-h1-0000- 00bz8 xpgbwt-p1-0000- 00bz8 xpgbwt-u1-0000- 00bz8 q2 87.4 96.1 xpgbwt-p1-0000- 00az8 xpgbwt-u1-0000- 00az8 p4 80.6 88.6 xpgbwt-p1-0000- 009z8 xpgbwt-u1-0000- 009z8 p3 73.9 81.2 xpgbwt-p1-0000- 008z8 xpgbwt-u1-0000- 008z8 p2 67.2 73.9 xpgbwt-p1-0000- 007z8 xpgbwt-u1-0000- 007z8 fl ux ch ar ac teristic s ( t j = 85?c) - continued copyright ? 2012-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -g2 led
10 rela tive spec tral pow e r distribution rela tive fl ux vs. jun c tion tempera ture ( i f = 350? m a) relative spectral power 0% 20% 40% 60% 80% 100% 380 430 480 530 580 630 680 730 780 relative radiant power wavelength (nm) 5000 k - 8300 k cct 3700 k - 5000 k cct 2600 k - 3700 k cct relative flux output vs. junction temperature 0% 20% 40% 60% 80% 100% 120% 25 50 75 100 125 150 relative luminous flux junction temperature (oc) copyright ? 2012-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -g2 led
11 elec trical ch ar ac teristic s ( t j = 85?c) rela tive fl ux vs. curr e nt ( t j = 85?c) electrical characteristics (tj = 25oc) 0 250 500 750 1000 1250 1500 2.65 2.75 2.85 2.95 3.05 3.15 forward current (ma) forward voltage (v) relative intensity vs. current (tj = 25oc) 0% 50% 100% 150% 200% 250% 300% 350% 0 250 500 750 1000 1250 1500 relative luminous flux forward current (ma) copyright ? 2012-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -g2 led
12 re la tive ch ro ma tic ity vs curr ent a nd tempera tur e (w arm white*) * warm white xlamp xp-g2 leds have a typical cri of 80. delta cct vs. current - 0.020 - 0.015 - 0.010 - 0.005 0.000 0.005 0.010 0.015 0.020 100 300 500 700 900 1100 1300 1500 current (ma) ccx ccy delta cct vs temp - 0.020 - 0.015 - 0.010 - 0.005 0.000 0.005 0.010 0.015 0.020 25 50 75 100 125 150 tsp ( c) ccx ccy copyright ? 2012-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -g2 led
13 t ypical spa ti al distribution ther mal design the maximum forward current is determined by the thermal resistance between the l e d junction and ambient. it is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. typical spatial radiation pattern 0% 20% 40% 60% 80% 100% - 100 - 80 - 60 - 40 - 20 0 20 40 60 80 100 relative luminous intensity angle (o) thermal design cool white 0 200 400 600 800 1000 1200 1400 1600 0 20 40 60 80 100 120 140 160 maximum current (ma) ambient temperature (oc) rj - a = 10 c/w rj - a = 15 c/w rj - a = 20 c/w rj - a = 25 c/w copyright ? 2012-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -g2 led
14 perf or mance grou p s C lum inous fl ux xlamp xp-g2 leds are tested for luminous fux and placed into one of the following luminous - fux groups: group code minimum luminous flux (lm) @ 350?ma maximum luminous flux (lm) @ 350?ma p2 67.2 73.9 p3 73.9 80.6 p4 80.6 87.4 q2 87.4 93.9 q3 93.9 100 q4 100 107 q5 107 114 r2 114 122 r3 122 130 r4 130 139 r5 139 148 s2 148 156 s3 156 164 s4 164 172 s5 172 182 copyright ? 2012-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -g2 led
15 perf or mance grou p s C chro ma tic ity region x y region x y region x y region x y 0a 0.2950 0.2970 0b 0.2920 0.3060 0c 0.2984 0.3133 0d 0.2984 0.3133 0.2920 0.3060 0.2895 0.3135 0.2962 0.3220 0.3048 0.3207 0.2984 0.3133 0.2962 0.3220 0.3028 0.3304 0.3068 0.3113 0.3009 0.3042 0.2984 0.3133 0.3048 0.3207 0.3009 0.3042 0r 0.2980 0.2880 0s 0.2895 0.3135 0t 0.2962 0.3220 0u 0.3037 0.2937 0.2950 0.2970 0.2870 0.3210 0.2937 0.3312 0.3009 0.3042 0.3009 0.3042 0.2937 0.3312 0.3005 0.3415 0.3068 0.3113 0.3037 0.2937 0.2962 0.3220 0.3028 0.3304 0.3093 0.2993 1a 0.3048 0.3207 1b 0.3028 0.3304 1c 0.3115 0.3391 1d 0.3130 0.3290 0.3130 0.3290 0.3115 0.3391 0.3205 0.3481 0.3213 0.3373 0.3144 0.3186 0.3130 0.3290 0.3213 0.3373 0.3221 0.3261 0.3068 0.3113 0.3048 0.3207 0.3130 0.3290 0.3144 0.3186 1r 0.3068 0.3113 1s 0.3005 0.3415 1t 0.3099 0.3509 1u 0.3144 0.3186 0.3144 0.3186 0.3099 0.3509 0.3196 0.3602 0.3221 0.3261 0.3161 0.3059 0.3115 0.3391 0.3205 0.3481 0.3231 0.3120 0.3093 0.2993 0.3028 0.3304 0.3115 0.3391 0.3161 0.3059 2a 0.3215 0.3350 2b 0.3207 0.3462 2c 0.3290 0.3538 2d 0.3290 0.3417 0.3290 0.3417 0.3290 0.3538 0.3376 0.3616 0.3371 0.3490 0.3290 0.3300 0.3290 0.3417 0.3371 0.3490 0.3366 0.3369 0.3222 0.3243 0.3215 0.3350 0.3290 0.3417 0.3290 0.3300 2r 0.3222 0.3243 2s 0.3196 0.3602 2t 0.3290 0.3690 2u 0.3290 0.3300 0.3290 0.3300 0.3290 0.3690 0.3381 0.3762 0.3366 0.3369 0.3290 0.3180 0.3290 0.3538 0.3376 0.3616 0.3361 0.3245 0.3231 0.3120 0.3207 0.3462 0.3290 0.3538 0.3290 0.3180 3a 0.3371 0.3490 3b 0.3376 0.3616 3c 0.3463 0.3687 3d 0.3451 0.3554 0.3451 0.3554 0.3463 0.3687 0.3551 0.3760 0.3533 0.3620 0.3440 0.3427 0.3451 0.3554 0.3533 0.3620 0.3515 0.3487 0.3366 0.3369 0.3371 0.3490 0.3451 0.3554 0.3440 0.3427 3r 0.3366 0.3369 3s 0.3381 0.3762 0.3440 0.3428 0.3480 0.3840 0.3429 0.3307 0.3463 0.3687 0.3361 0.3245 0.3376 0.3616 4a 0.3530 0.3597 4b 0.3548 0.3736 4c 0.3641 0.3804 4d 0.3615 0.3659 0.3615 0.3659 0.3641 0.3804 0.3736 0.3874 0.3702 0.3722 0.3590 0.3521 0.3615 0.3659 0.3702 0.3722 0.3670 0.3578 0.3512 0.3465 0.3530 0.3597 0.3615 0.3659 0.3590 0.3521 copyright ? 2012-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -g2 led
16 region x y region x y region x y region x y 5a1 0.3670 0.3578 5a2 0.3686 0.3649 5a3 0.3744 0.3685 5a4 0.3726 0.3612 0.3686 0.3649 0.3702 0.3722 0.3763 0.3760 0.3744 0.3685 0.3744 0.3685 0.3763 0.3760 0.3825 0.3798 0.3804 0.3721 0.3726 0.3612 0.3744 0.3685 0.3804 0.3721 0.3783 0.3646 5b1 0.3702 0.3722 5b2 0.3719 0.3797 5b3 0.3782 0.3837 5b4 0.3763 0.3760 0.3719 0.3797 0.3736 0.3874 0.3802 0.3916 0.3782 0.3837 0.3782 0.3837 0.3802 0.3916 0.3869 0.3958 0.3847 0.3877 0.3763 0.3760 0.3782 0.3837 0.3847 0.3877 0.3825 0.3798 5c1 0.3825 0.3798 5c2 0.3847 0.3877 5c3 0.3912 0.3917 5c4 0.3887 0.3836 0.3847 0.3877 0.3869 0.3958 0.3937 0.4001 0.3912 0.3917 0.3912 0.3917 0.3937 0.4001 0.4006 0.4044 0.3978 0.3958 0.3887 0.3836 0.3912 0.3917 0.3978 0.3958 0.3950 0.3875 5d1 0.3783 0.3646 5d2 0.3804 0.3721 5d3 0.3863 0.3758 5d4 0.3840 0.3681 0.3804 0.3721 0.3825 0.3798 0.3887 0.3836 0.3863 0.3758 0.3863 0.3758 0.3887 0.3836 0.3950 0.3875 0.3924 0.3794 0.3840 0.3681 0.3863 0.3758 0.3924 0.3794 0.3898 0.3716 6a1 0.3889 0.3690 6a2 0.3915 0.3768 6a3 0.3981 0.3800 6a4 0.3953 0.3720 0.3915 0.3768 0.3941 0.3848 0.4010 0.3882 0.3981 0.3800 0.3981 0.3800 0.4010 0.3882 0.4080 0.3916 0.4048 0.3832 0.3953 0.3720 0.3981 0.3800 0.4048 0.3832 0.4017 0.3751 6b1 0.3941 0.3848 6b2 0.3968 0.3930 6b3 0.4040 0.3966 6b4 0.4010 0.3882 0.3968 0.3930 0.3996 0.4015 0.4071 0.4052 0.4040 0.3966 0.4040 0.3966 0.4071 0.4052 0.4146 0.4089 0.4113 0.4001 0.4010 0.3882 0.4040 0.3966 0.4113 0.4001 0.4080 0.3916 6c1 0.4080 0.3916 6c2 0.4113 0.4001 6c3 0.4186 0.4037 6c4 0.4150 0.3950 0.4113 0.4001 0.4146 0.4089 0.4222 0.4127 0.4186 0.4037 0.4186 0.4037 0.4222 0.4127 0.4299 0.4165 0.4259 0.4073 0.4150 0.3950 0.4186 0.4037 0.4259 0.4073 0.4221 0.3984 6d1 0.4017 0.3751 6d2 0.4048 0.3832 6d3 0.4116 0.3865 6d4 0.4082 0.3782 0.4048 0.3832 0.4080 0.3916 0.4150 0.3950 0.4116 0.3865 0.4116 0.3865 0.4150 0.3950 0.4221 0.3984 0.4183 0.3898 0.4082 0.3782 0.4116 0.3865 0.4183 0.3898 0.4147 0.3814 7a1 0.4147 0.3814 7a2 0.4183 0.3898 7a3 0.4242 0.3919 7a4 0.4203 0.3833 0.4183 0.3898 0.4221 0.3984 0.4281 0.4006 0.4242 0.3919 0.4242 0.3919 0.4281 0.4006 0.4342 0.4028 0.4300 0.3939 0.4203 0.3833 0.4242 0.3919 0.4300 0.3939 0.4259 0.3853 perfo rma nc e gr oups C chro ma tic ity ( c ontinued) copyright ? 2012-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -g2 led
17 region x y region x y region x y region x y 7b1 0.4221 0.3984 7b2 0.4259 0.4073 7b3 0.4322 0.4096 7b4 0.4281 0.4006 0.4259 0.4073 0.4299 0.4165 0.4364 0.4188 0.4322 0.4096 0.4322 0.4096 0.4364 0.4188 0.4430 0.4212 0.4385 0.4119 0.4281 0.4006 0.4322 0.4096 0.4385 0.4119 0.4342 0.4028 7c1 0.4342 0.4028 7c2 0.4385 0.4119 7c3 0.4449 0.4141 7c4 0.4403 0.4049 0.4385 0.4119 0.4430 0.4212 0.4496 0.4236 0.4449 0.4141 0.4449 0.4141 0.4496 0.4236 0.4562 0.4260 0.4513 0.4164 0.4403 0.4049 0.4449 0.4141 0.4513 0.4164 0.4465 0.4071 7d1 0.4259 0.3853 7d2 0.4300 0.3939 7d3 0.4359 0.3960 7d4 0.4316 0.3873 0.4300 0.3939 0.4342 0.4028 0.4403 0.4049 0.4359 0.3960 0.4359 0.3960 0.4403 0.4049 0.4465 0.4071 0.4418 0.3981 0.4316 0.3873 0.4359 0.3960 0.4418 0.3981 0.4373 0.3893 8a1 0.4373 0.3893 8a2 0.4418 0.3981 8a3 0.4475 0.3994 8a4 0.4428 0.3906 0.4418 0.3981 0.4465 0.4071 0.4523 0.4085 0.4475 0.3994 0.4475 0.3994 0.4523 0.4085 0.4582 0.4099 0.4532 0.4008 0.4428 0.3906 0.4475 0.3994 0.4532 0.4008 0.4483 0.3919 8b1 0.4465 0.4071 8b2 0.4513 0.4164 8b3 0.4573 0.4178 8b4 0.4523 0.4085 0.4513 0.4164 0.4562 0.4260 0.4624 0.4274 0.4573 0.4178 0.4573 0.4178 0.4624 0.4274 0.4687 0.4289 0.4634 0.4193 0.4523 0.4085 0.4573 0.4178 0.4634 0.4193 0.4582 0.4099 8c1 0.4582 0.4099 8c2 0.4634 0.4193 8c3 0.4695 0.4207 8c4 0.4641 0.4112 0.4634 0.4193 0.4687 0.4289 0.4750 0.4304 0.4695 0.4207 0.4695 0.4207 0.4750 0.4304 0.4813 0.4319 0.4756 0.4221 0.4641 0.4112 0.4695 0.4207 0.4756 0.4221 0.4700 0.4126 8d1 0.4483 0.3919 8d2 0.4532 0.4008 8d3 0.4589 0.4021 8d4 0.4538 0.3931 0.4532 0.4008 0.4582 0.4099 0.4641 0.4112 0.4589 0.4021 0.4589 0.4021 0.4641 0.4112 0.4700 0.4126 0.4646 0.4034 0.4538 0.3931 0.4589 0.4021 0.4646 0.4034 0.4593 0.3944 perfo rma nc e gr oups C chro ma tic ity ( c ontinued) copyright ? 2012-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -g2 led
18 cree s st an dard chro ma tic ity reg ions pl ott ed on th e 1931 c i e curve ansi cool white neutral white 5000 k 5700 k 6500 k 8000 k 0 a 0 b 0 c 0 d 0 r 0 s 0 t 0 u 1 a 1 b 1 c 1 d 2 a 2 b 2 c 2 d 3 a 3 b 1 r 1 s 1 t 1 u 2 r 2 s 2 t 2 u 3 r 3 s 0 .28 0 .29 0.30 0 .31 0.32 0 .33 0 .34 0.35 0 .36 0 .37 0.38 0 .39 0 .40 0 .28 0 .29 0 .30 0 .31 0.32 0.33 0.34 0.35 0.36 ccy ccx a nsi c78.3 7 7a 3500 k 4000 k 4500 k 5000 k 3 a 3 b 3 c 3 d 4 a 4 b 4 c 4 d 3 r 3 s 3 t 3 u 4 r 4 s 4 t 4 u 5 r 5 s 5 t 5 u 5 a 1 5 a 2 5 a 3 5 a 4 5 b 1 5 b 2 5 b 3 5 b 4 5 c 1 5 c 2 5 c 3 5 c 4 5 d 1 5 d 2 5 d 3 5 d 4 6 a 1 6 a 2 6 a 3 6 a 4 6 b 1 6 b 2 6 b 3 6 b 4 6 c 1 6 c 2 6 c 3 6 c 4 6 d 1 6 d 2 6 d 3 6 d 4 6 r 6 s 6 t 6 u 0 . 3 2 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 0 . 3 7 0 . 3 8 0 . 3 9 0 . 4 0 0 . 4 1 0 . 4 2 0 . 4 3 0 . 4 4 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 0 . 3 7 0 . 3 8 0 . 3 9 0 . 4 0 0 . 4 1 0 . 4 2 0 . 4 3 0 . 4 4 c c y c c x a ns i c 7 8 . 3 7 7 a copyright ? 2012-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -g2 led
19 cree s st an dard chro ma tic ity reg ions pl ott ed on th e 1931 c i e curve - c ontinued ansi neutral white and ansi warm white 2700 k 3000 k 3500 k 4000 k 4500 k 5000 k 3 a 3 b 3 c 3 d 4 a 4 b 4 c 4 d 5 a 1 5 a 2 5 a 3 5 a 4 5 b1 5 b2 5 b3 5b4 5 c 1 5c 2 5c 3 5c 4 5d1 5d2 5d3 5d4 6 a 1 6a 2 6 a 3 6 a 4 6 b1 6 b2 6 b3 6 b4 6 c 1 6 c 2 6 c 3 6 c 4 6d1 6d2 6d3 6d4 7 a 1 7 a 2 7 a 3 7 a 4 7 b1 7 b2 7b3 7b4 7c 1 7c 2 7c 3 7c 4 7d1 7d2 7d3 7d4 8 a 1 8a 2 8 a 3 8a 4 8b1 8 b2 8b3 8 b4 8 c 1 8 c 2 8 c 3 8c 4 8d1 8d2 8d3 8d4 0 .33 0 .34 0.35 0 .36 0.37 0 .38 0.39 0 .40 0.41 0 .42 0.43 0 .44 0 .45 0.46 0.33 0 . 3 4 0.35 0 . 3 6 0.37 0 . 3 8 0.39 0 . 4 0 0.41 0 . 4 2 0 . 4 3 0.44 0 . 4 5 0.46 0 . 4 7 0.48 0 . 4 9 ccy ccx a n si c7 8.3 77a copyright ? 2012-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -g2 led
20 cree s st an dard coo l w hite kits p l ott ed on a nsi st an dard chro ma tic ity reg ions 5000 k 5700 k 6500 k 8000 k 0a 0b 0c 0d 0r 0s 0t 0u 1a 1b 1c 1d 2a 2b 2c 2d 3a 3b 1r 1s 1t 1u 2r 2s 2t 2u 3r 3s 0 . 2 8 0 . 2 9 0 . 3 0 0 . 3 1 0 . 3 2 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 0 . 3 7 0 . 3 8 0 . 3 9 0 . 4 0 0 . 2 8 0 . 2 9 0 . 3 0 0 . 3 1 0 . 3 2 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 c c y c c x a ns i c 7 8 . 3 7 7 a 50 5000 k 5700 k 6500 k 8000 k 0a 0b 0c 0d 0r 0s 0t 0u 1a 1b 1c 1d 2a 2b 2c 2d 3a 3b 1r 1s 1t 1u 2r 2s 2t 2u 3r 3s 0 . 2 8 0 . 2 9 0 . 3 0 0 . 3 1 0 . 3 2 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 0 . 3 7 0 . 3 8 0 . 3 9 0 . 4 0 0 . 2 8 0 . 2 9 0 . 3 0 0 . 3 1 0 . 3 2 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 c c y c c x a ns i c 7 8 . 3 7 7 a 51 5000 k 5700 k 6500 k 8000 k 0a 0b 0c 0d 0r 0s 0t 0u 1a 1b 1c 1d 2a 2b 2c 2d 3a 3b 1r 1s 1t 1u 2r 2s 2t 2u 3r 3s 0 . 2 8 0 . 2 9 0 . 3 0 0 . 3 1 0 . 3 2 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 0 . 3 7 0 . 3 8 0 . 3 9 0 . 4 0 0 . 2 8 0 . 2 9 0 . 3 0 0 . 3 1 0 . 3 2 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 c c y c c x a ns i c 7 8 . 3 7 7 a 53 5000 k 5700 k 6500 k 8000 k 0a 0b 0c 0d 0r 0s 0t 0u 1a 1b 1c 1d 2a 2b 2c 2d 3a 3b 1r 1s 1t 1u 2r 2s 2t 2u 3r 3s 0 . 2 8 0 . 2 9 0 . 3 0 0 . 3 1 0 . 3 2 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 0 . 3 7 0 . 3 8 0 . 3 9 0 . 4 0 0 . 2 8 0 . 2 9 0 . 3 0 0 . 3 1 0 . 3 2 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 c c y c c x a ns i c 7 8 . 3 7 7 a e1 5000 k 5700 k 6500 k 8000 k 0a 0b 0c 0d 0r 0s 0t 0u 1a 1b 1c 1d 2a 2b 2c 2d 3a 3b 1r 1s 1t 1u 2r 2s 2t 2u 3r 3s 0 . 2 8 0 . 2 9 0 . 3 0 0 . 3 1 0 . 3 2 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 0 . 3 7 0 . 3 8 0 . 3 9 0 . 4 0 0 . 2 8 0 . 2 9 0 . 3 0 0 . 3 1 0 . 3 2 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 c c y c c x a ns i c 7 8 . 3 7 7 a e2 copyright ? 2012-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -g2 led
21 cree s st an dard warm and neutral w hite kits p l ott ed on a nsi st an dard chro ma tic ity reg ions 2700 k 3000 k 3500 k 4000 k 4500 k 5000 k 3 a 3 b 3 c 3 d 4 a 4 b 4 c 4 d 5 a 1 5 a 2 5 a 3 5 a 4 5 b 1 5 b 2 5 b 3 5 b 4 5 c 1 5 c 2 5 c 3 5 c 4 5 d 1 5 d 2 5 d 3 5 d 4 6 a 1 6 a 2 6 a 3 6 a 4 6 b 1 6 b 2 6 b 3 6 b 4 6 c 1 6 c 2 6 c 3 6 c 4 6 d 1 6 d 2 6 d 3 6 d 4 7 a 1 7 a 2 7 a 3 7 a 4 7 b 1 7 b 2 7 b 3 7 b 4 7 c 1 7 c 2 7 c 3 7 c 4 7 d 1 7 d 2 7 d 3 7 d 4 8 a 1 8 a 2 8 a 3 8 a 4 8 b 1 8 b 2 8 b 3 8 b 4 8 c 1 8 c 2 8 c 3 8 c 4 8 d 1 8 d 2 8 d 3 8 d 4 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 0 . 3 7 0 . 3 8 0 . 3 9 0 . 4 0 0 . 4 1 0 . 4 2 0 . 4 3 0 . 4 4 0 . 4 5 0 . 4 6 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 0 . 3 7 0 . 3 8 0 . 3 9 0 . 4 0 0 . 4 1 0 . 4 2 0 . 4 3 0 . 4 4 0 . 4 5 0 . 4 6 0 . 4 7 0 . 4 8 0 . 4 9 c c y c c x a ns i c 7 8 . 3 7 7 a e3 e4 e5 e6 e8 e7 2700 k 3000 k 3500 k 4000 k 4500 k 5000 k 3 a 3 b 3 c 3 d 4 a 4 b 4 c 4 d 5 a 1 5 a 2 5 a 3 5 a 4 5 b 1 5 b 2 5 b 3 5 b 4 5 c 1 5 c 2 5 c 3 5 c 4 5 d 1 5 d 2 5 d 3 5 d 4 6 a 1 6 a 2 6 a 3 6 a 4 6 b 1 6 b 2 6 b 3 6 b 4 6 c 1 6 c 2 6 c 3 6 c 4 6 d 1 6 d 2 6 d 3 6 d 4 7 a 1 7 a 2 7 a 3 7 a 4 7 b 1 7 b 2 7 b 3 7 b 4 7 c 1 7 c 2 7 c 3 7 c 4 7 d 1 7 d 2 7 d 3 7 d 4 8 a 1 8 a 2 8 a 3 8 a 4 8 b 1 8 b 2 8 b 3 8 b 4 8 c 1 8 c 2 8 c 3 8 c 4 8 d 1 8 d 2 8 d 3 8 d 4 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 0 . 3 7 0 . 3 8 0 . 3 9 0 . 4 0 0 . 4 1 0 . 4 2 0 . 4 3 0 . 4 4 0 . 4 5 0 . 4 6 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 0 . 3 7 0 . 3 8 0 . 3 9 0 . 4 0 0 . 4 1 0 . 4 2 0 . 4 3 0 . 4 4 0 . 4 5 0 . 4 6 0 . 4 7 0 . 4 8 0 . 4 9 c c y c c x a ns i c 7 8 . 3 7 7 a f4 f6 f7 f5 f8 copyright ? 2012-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -g2 led
22 cree s st an dard warm and neutral w hite kits p l ott ed on a nsi st an dard chro ma tic ity reg ions - continu ed 2700 k 3000 k 3500 k 4000 k 4500 k 5000 k 3 a 3 b 3 c 3 d 4 a 4 b 4 c 4 d 5 a 1 5 a 2 5 a 3 5 a 4 5 b 1 5 b 2 5 b 3 5 b 4 5 c 1 5 c 2 5 c 3 5 c 4 5 d 1 5 d 2 5 d 3 5 d 4 6 a 1 6 a 2 6 a 3 6 a 4 6 b 1 6 b 2 6 b 3 6 b 4 6 c 1 6 c 2 6 c 3 6 c 4 6 d 1 6 d 2 6 d 3 6 d 4 7 a 1 7 a 2 7 a 3 7 a 4 7 b 1 7 b 2 7 b 3 7 b 4 7 c 1 7 c 2 7 c 3 7 c 4 7 d 1 7 d 2 7 d 3 7 d 4 8 a 1 8 a 2 8 a 3 8 a 4 8 b 1 8 b 2 8 b 3 8 b 4 8 c 1 8 c 2 8 c 3 8 c 4 8 d 1 8 d 2 8 d 3 8 d 4 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 0 . 3 7 0 . 3 8 0 . 3 9 0 . 4 0 0 . 4 1 0 . 4 2 0 . 4 3 0 . 4 4 0 . 4 5 0 . 4 6 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 0 . 3 7 0 . 3 8 0 . 3 9 0 . 4 0 0 . 4 1 0 . 4 2 0 . 4 3 0 . 4 4 0 . 4 5 0 . 4 6 0 . 4 7 0 . 4 8 0 . 4 9 c c y c c x a ns i c 7 8 . 3 7 7 a z6 z7 z5 z8 copyright ? 2012-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -g2 led
23 cree s st an dard chro ma tic ity kits the following table provides the chromaticity bins associated with chromaticity kits. color cc t kit chromaticity bins cool white 6200 k 51 0a, 0b, 0c, 0d, 0r, 0s, 0t, 0u, 1a, 1b, 1c, 1d, 1r, 1s, 1t, 1u, 2a, 2b, 2c, 2d, 2r, 2s, 2t, 2u, 3a, 3b, 3r, 3s 6000 k 53 1a, 1b, 1c, 1d, 1r, 1s, 1t, 1u, 2a, 2b, 2c, 2d, 2r, 2s, 2t, 3a, 3b, 3s 6200 k 50 1a, 1b, 1c, 1d, 2a, 2b, 2c, 2d 6500 k e1 1a, 1b, 1c, 1d 5700 k e2 2a, 2b, 2c, 2d neutral white 5000 k e3 3a, 3b, 3c, 3d 4750 k f4 3c, 3d, 4a, 4b 4500 k e4 4a, 4b, 4c, 4d 4250 k f5 4c, 4d, 5a1, 5a2, 5a3, 5a4, 5b1, 5b2, 5b3, 5b4 4000 k e5 5a1, 5a2, 5a3, 5a4, 5b1, 5b2, 5b3, 5b4, 5c1, 5c2, 5c3, 5c4, 5d1, 5d2, 5d3, 5d4 4000 k z5 5a3, 5b4, 5c1, 5d2 warm white 3750 k f6 5c1, 5c2, 5c3, 5c4, 5d1, 5d2, 5d3, 5d4, 6a1, 6a2, 6a3, 6a4, 6b1, 6b2, 6b3, 6b4 3500 k e6 6a1, 6a2, 6a3, 6a4, 6b1, 6b2, 6b3, 6b4, 6c1, 6c2, 6c3, 6c4, 6d1, 6d2, 6d3, 6d4 3500 k z6 6a3, 6b4, 6c1, 6d2 3250 k f7 6c1, 6c2, 6c3, 6c4, 6d1, 6d2, 6d3, 6d4, 7a1, 7a2, 7a3, 7a4, 7b1, 7b2, 7b3, 7b4 3000 k e7 7a1, 7a2, 7a3, 7a4, 7b1, 7b2, 7b3, 7b4, 7c1, 7c2, 7c3, 7c4, 7d1, 7d2, 7d3, 7d4 3000 k z7 7a3, 7b4, 7c1, 7d2 2850 k f8 7c1, 7c2, 7c3, 7c4, 7d1, 7d2, 7d3, 7d4, 8a1, 8a2, 8a3, 8a4, 8b1, 8b2, 8b3, 8b4 2700 k e8 8a1, 8a2, 8a3, 8a4, 8b1, 8b2, 8b3, 8b4, 8c1, 8c2, 8c3, 8c4, 8d1, 8d2, 8d3, 8d4 2700 k z8 8a3, 8b4, 8c1, 8d2 copyright ? 2012-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -g2 led
24 b in and o rde r code for ma ts xp-g2 bin codes and order codes are confgured in the following manner: o rder code bin code sssccc- bd-hhhh-nnnnn internal code color bwt = gen 2 white series xpg = xp - g color specification 0 1 = o utdoor white b 1 = 7 0 cri minimum l 1 = standard cri h 1 = 8 0 cri minimum p1 = 8 5 cri minimum u 1 = 9 0 cri minimum kit number sssccc-bd- www - ff - g-aa internal code chromaticity bin color bwt = gen 2 white series xpg = xp - g color specification 0 1 = o utdoor white b 1 = 7 0 cri minimum l 1 = standard cri h 1 = 8 0 cri minimum p1 = 8 5 cri minimum u 1 = 9 0 cri minimum luminous flux group copyright ? 2012-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -g2 led
25 refl ow so ldering ch ar ac teristics in testing, cree has found xlamp xp-g2 leds to be compatible with jedec j-std-020c, using the parameters listed below. as a general guideline, cree recommends that users follow the recommended soldering profle provided by the manufacturer of the solder paste used. note that this general guideline may not apply to all pcb designs and confgurations of refow soldering equipment. profile feature lead-free solder average ramp-up rate (ts max to t p ) 1.2?c/second preheat: temperature min (ts min ) 120 c preheat: temperature max (ts max ) 170 c preheat: time (ts min to ts max ) 65-150 seconds time maintained above: temperature (t l ) 217 c time maintained above: time (t l ) 45-90 seconds peak/classifcation temperature (tp) 235 - 245 c time within 5?c of actual peak temperature (tp) 20-40 seconds ramp-down rate 1 - 6 c/second time 25?c to peak temperature 4 minutes max. note: all temperatures refer to topside of the package, measured on the package body surface. ipc/jedec j-std-020c t p t l temperature time t 25?c to peak preheat ts t s t p 25 ramp-down ramp-up critical zone t l to t p ts max ts min copyright ? 2012-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -g2 led
26 n otes measurements the luminous fux, radiant power, chromaticity and cri measurements in this document are binning specifcations only and solely represent product measurements as of the date of shipment. these measurements will change over time based on a number of factors that are not within crees control and are not intended or provided as operational specifcations for the products. calculated values are provided for informational purposes only and are not intended as specifcations. p re-release qualifcation t esting please read the le d reliability overview for details of the qualifcation process cree applies to ensure long-term reliability for xlamp leds and details of crees pre-release qualifcation testing for xlamp leds. lumen maintenance cree now uses standardized i e s lm-80-08 and tm-21-11 methods for collecting long-term data and extrapolating le d lumen maintenance. for information on the specifc lm-80 data sets available for this led, refer to the public lm-80 results document . please read the long-term lumen maintenance application note for more details on crees lumen maintenance testing and forecasting. please read the thermal management application note for details on how thermal design, ambient temperature, and drive current affect the le d junction temperature. moisture sensitivity cree recommends keeping xlamp leds in the provided, resealable moisture-barrier packaging (mbp) until immediately prior to soldering. unopened mbps that contain xlamp le ds do not need special storage for moisture sensitivity. once the mbp is opened, xlamp xp-g2 leds may be stored as msl 1 per jedec j-std-033, meaning they have unlimited foor life in conditions of 30 oc/85% relative humidity (rh). regardless of the storage condition, cree recommends sealing any unsoldered leds in the original mbp. rohs compliance the levels of rohs restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with eu directive 2011/65/ec (rohs2), as implemented january 2, 2013. rohs declarations for this product can be obtained from your cree representative or from the product documentation sections of www.cree.com . r each compliance reach substances of very high concern (svhcs) information is available for this product. since the european chemical agency (echa) has published notice of their intent to frequently revise the svhc listing for the foreseeable future, please contact a cree representative to insure you get the most up-to-date reach declaration. reach banned substance information (reach article 67) is also available upon request. copyright ? 2012-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -g2 led
27 ul ? r ecognized component level 4 enclosure consideration. the led package or a portion thereof has been investigated as a fre and electrical enclosure per ansi/ ul 8750. v ision advisory warning: do not look at an exposed lamp in operation. eye injury can result. for more information about leds and eye safety, please refer to the led e ye safety application note . n ote s - continued copyright ? 2012-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -g2 led
28 mech anical di me nsions ( t a ?=?25?c) thermal vias, if present, are not shown on these drawings. all measurements are .13 mm unless otherwise indicated. side view t op view size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 3.30 3.30 .73 2.26 r1.53 1.30 .50 2.30 .50 3.45 3.45 .58 .50 3.30 2.30 .64 .25 .75 1.01 3.30 .50 3.30 .50 1.30 3.30 3.30 ref. 3.30 ref. 1 / 1 22.000 c 2610-00066 outline drawing xpg g3 10/6/15 d. cronin revisons rev description by date app'd recommended pcb solder pad recommended stencil pattern (hatched area is opening) all dimensions are .13mm unless otherwise noted primary alternative optical reference optical reference b ottom view alternate b ottom view anode anode size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 3.30 3.30 .73 2.26 r1.53 1.30 .50 2.30 .50 3.45 3.45 .58 .50 3.30 2.30 .64 .25 .75 1.01 3.30 .50 3.30 .50 1.30 3.30 3.30 ref. 3.30 ref. 1 / 1 22.000 c 2610-00066 outline drawing xpg g3 10/6/15 d. cronin revisons rev description by date app'd recommended pcb solder pad recommended stencil pattern (hatched area is opening) all dimensions are .13mm unless otherwise noted primary alternative optical reference optical reference size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 3.30 3.30 .73 2.26 r1.53 1.30 .50 2.30 .50 3.45 3.45 .58 .50 3.30 2.30 .64 .25 .75 1.01 3.30 .50 3.30 .50 1.30 3.30 3.30 ref. 3.30 ref. 1 / 1 22.000 c 2610-00066 outline drawing xpg g3 10/6/15 d. cronin revisons rev description by date app'd recommended pcb solder pad recommended stencil pattern (hatched area is opening) all dimensions are .13mm unless otherwise noted primary alternative optical reference optical reference recommended pcb s older pad recommended s tencil pattern (h atched area is open) size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 3.30 3.30 .73 2.26 r1.53 1.30 .50 2.30 .50 3.45 3.45 .58 .50 3.30 2.30 .64 .25 .75 1.01 3.30 .50 3.30 .50 1.30 3.30 3.30 ref. 3.30 ref. 1 / 1 22.000 c 2610-00066 outline drawing xpg g3 10/6/15 d. cronin revisons rev description by date app'd recommended pcb solder pad recommended stencil pattern (hatched area is opening) all dimensions are .13mm unless otherwise noted primary alternative optical reference optical reference size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 3.30 3.30 .73 2.26 r1.53 1.30 .50 2.30 .50 3.45 3.45 .58 .50 3.30 2.30 .64 .25 .75 1.01 3.30 .50 3.30 .50 1.30 3.30 3.30 ref. 3.30 ref. 1 / 1 22.000 c 2610-00066 outline drawing xpg g3 10/6/15 d. cronin revisons rev description by date app'd recommended pcb solder pad recommended stencil pattern (hatched area is opening) all dimensions are .13mm unless otherwise noted primary alternative optical reference optical reference copyright ? 2012-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -g2 led
29 tape and reel all cree carrier tapes conform to eia-481d, automated component handling systems standard. all dimensions in mm. size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 trailer 160mm (min) of empty pockets sealed with tape (20 pockets min.) loaded pockets (1000 lamps) leader 400mm (min.) of empty pockets with at least 100mm sealed by tape (50 empty pockets min.) 12.0 +.3 -.0 1.75 .10 4.1 8.1 2.5.1 1 / 1 3.000 b 2402-00014 xp hew loading spec -- -- -- -- -- -- 11/29/10 d. cronin revisons rev description by date app'd b added cathode and anode note reoriented device dc 2/26/12 end start user feed direction cathode side anode side user feed direction 7" 1.5 .1 13mm pocket tape carrier tape ? 13 ? 61 0.5 12.40 0 + 2.00 measured at hub 12.40 measured at inside edge 16.40 sheet 1 of 1 1:2 2400-00005 size title rev. c drawing no. date date date check final protective finish material approved drawn by third angle projection .x 0.3 x 2 .xx .10 .x .25 for sheet metal parts only .xx .13 x 1 unless otherwise specified dimensions are in millimeters & before finish. tolerance unless specified: scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 361-4770 4600 silicon drive durham, n.c 27703 notice cree confidential. this plot and the information contained within are the proprietary and confidential information of cree, inc. this plot may not be copied, reproduced or disclosed to any unauthorized person without the written consent of cree, inc. reel, 7" x 12mm wide b liudezhi 2012/5/25 ps ? 190 ????1? ??e (c) by foxit software company, 2004 foxit pdf editor ?- od 7.5'' ? 13 ? 61 0.5 12.40 0 + 2.00 measured at hub 12.40 measured at inside edge 16.40 sheet 1 of 1 1:2 2400-00005 size title rev. c drawing no. date date date check final protective finish material approved drawn by third angle projection .x 0.3 x 2 .xx .10 .x .25 for sheet metal parts only .xx .13 x 1 unless otherwise specified dimensions are in millimeters & before finish. tolerance unless specified: scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 361-4770 4600 silicon drive durham, n.c 27703 notice cree confidential. this plot and the information contained within are the proprietary and confidential information of cree, inc. this plot may not be copied, reproduced or disclosed to any unauthorized person without the written consent of cree, inc. reel, 7" x 12mm wide b liudezhi 2012/5/25 ps ? 190 ????1? ??e (c) by foxit software company, 2004 foxit pdf editor ?- od 7.5'' y y x x ref 0.59 w f(iii) p1 d1 1.5 min. bo ao r 0.2 typical ref 4.375 ko other material available. (iv) (iii) (ii) (i) hole to centerline of pocket. measured from centerline of sprocket holes is 0.20. cumulative tolerance of 10 sprocket to centerline of pocket. measured from centerline of sprocket hole section y-y section x-x 2.0 0.05 (i) p2 1.55 0.05 do 4.0 0.1 (ii) po 1.75 0.1 e1 0.30 0.05 t ref r 2.24 2.40 ko +0.0/-0.1 3.70 1 w f p +/- 0.05 +/- 0.1 +0.3/-0.1 5.50 8.00 12.00 ao 3.70 +/- 0.1 bo +/- 0.1 y y x x ref 0.59 w f(iii) p1 d1 1.5 min. bo ao r 0.2 typical ref 4.375 ko other material available. (iv) (iii) (ii) (i) hole to centerline of pocket. measured from centerline of sprocket holes is 0.20. cumulative tolerance of 10 sprocket to centerline of pocket. measured from centerline of sprocket hole section y-y section x-x 2.0 0.05 (i) p2 1.55 0.05 do 4.0 0.1 (ii) po 1.75 0.1 e1 0.30 0.05 t ref r 2.24 2.40 ko +0.0/-0.1 3.70 1 w f p +/- 0.05 +/- 0.1 +0.3/-0.1 5.50 8.00 12.00 ao 3.70 +/- 0.1 bo +/- 0.1 y y x x ref 0.59 w f(iii) p1 d1 1.5 min. bo ao r 0.2 typical ref 4.375 ko other material available. (iv) (iii) (ii) (i) hole to centerline of pocket. measured from centerline of sprocket holes is 0.20. cumulative tolerance of 10 sprocket to centerline of pocket. measured from centerline of sprocket hole section y-y section x-x 2.0 0.05 (i) p2 1.55 0.05 do 4.0 0.1 (ii) po 1.75 0.1 e1 0.30 0.05 t ref r 2.24 2.40 ko +0.0/-0.1 3.70 1 w f p +/- 0.05 +/- 0.1 +0.3/-0.1 5.50 8.00 12.00 ao 3.70 +/- 0.1 bo +/- 0.1 cathode side anode side copyright ? 2012-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -g2 led
30 p ackag ing patent label (on bottom of box) label with cree bin code, quantity, reel id label with cree bin code, quantity, reel id label with cree order code, quantity, reel id, po # label with cree order code, quantity, reel id, po # label with cree bin code, quantity, reel id unpackaged reel packaged reel boxed reel cree bin code & barcode label vacuum-sealed moisture barrier bag label with customer p/n, qty, lot #, po # label with cree bin code, q t y , lot # label with cree bin code, q t y , lot # v acuum - sealed moisture barrier bag p atent label label with customer order code, q t y , r eel i d , po # copyright ? 2012-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -g2 led

▲Up To Search▲

Price & Availability of XPGBWT-L1-0000-00F50

	To Download XPGBWT-L1-0000-00F50 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .