View IR-TC_9005542.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

asm gmbh irtc-adj-02/2009 tel.: 08123/986-0 fax: 08123/986-500 www.asm-sensor.de 1 11 51 water street, watertown, ma 02172 usa 800-422-3006 ? 617-923-9900 ? fax 617-923-9911 quick selection guide corporation these models allow users to calibrate the irt/c sensors to match a thermocouple output in whatever temperature range desired. for example: if the requirement is to measure and control a non-metal target in the 1000 f to 1100 f (540 c to 590 c) range, an irt/c.10a-k-hie sensor can be selected. it is then installed and calibrated, in place, to generate a type k signal for that temperature range. irt/c.100a 1.375 dia. (34,9) 10.45 lg. (265,4) 1.375 dia. (34,9) 2.97 lg. (75,3) irt/c acf models close focus irt/c amf models medium focus irt/c alf models long focus 1.375 dia. (34,9) 2.02 lg. (51,3) 1.7 (43) 1.375 dia. (34,9) 3.34 lg. (213) 3.0 (76) 4.1 (105) approximate scale 1:5 dimensions in inches (mm). irt/c.20a irt/c.10a 1.375 dia. (34,9) 1.375 dia. (34,9) 3.34 lg. (84,8) 4.15 lg. (105,4) 1.375 dia. 8.375 lg. (213) (34,9) 8.0 (203) irt/c axlf models extra long focus ordering information: (model) - (thermocouple type) - (hie or loe) use the selection table. select the model for (1) temperature range (2) spot size, and (3) target surface material (nonmetal or metal, uncoated). then finally, (4) select the thermocouple type (j,k, r or s). example: irt/c.10a -k- hie adjustable irt/c options adjustable irt/c models are also available, pre-calibrated, from exergen with nist traceability for quick multiple same sensor installations for factory automation and oems. also, millivolt signal output curves and mv tables are available for all sensor models for special calibrations. adjustable irt/c models adjustable IR-TC sensors
www.asm-sensor.de irtc-adj-02/2009 asm gmbh tel.: 08123/986-0 fax: 08123/986-500 www.asm-sensor.de 2 corporation 12 51 water street, watertown, ma 02172 usa 800-422-3006 ? 617-923-9900 ? fax 617-923-9911 quick selection guide model t/c types temperature range spot size target surface f c .10a-hie j, k -50 to 2500 -45 to 1370 distance 10 nonmetal .10a-loe j, k 500 to 2500 260 to 1370 distance 10 metal .20a-hie j, k 500 to 3000 260 to 1650 distance 20 nonmetal .20a-loe j, k 1000 to 3500 540 to 1930 distance 20 metal .100a-hie r, s 1000 to 5000 540 to 2760 distance 100 nonmetal .100a-loe r, s 1500 to 5000 820 to 2760 distance 100 metal .2acf-hie j, k 500 to 2500 260 to 1370 2.9 mm nonmetal .2acf-loe j, k 1000 to 2500 540 to 1370 2.9 mm metal .2/15acf-hie j, k 0 to 2500 -18 to 1370 2.9 x 8.7 mm nonmetal .2/15acf-loe j, k 500 to 2500 260 to 1370 2.9 x 8.7 mm metal .3amf-hi e j, k 500 to 2500 260 to 1370 3.7 mm nonmetal .3amf-loe j, k 1100 to 2500 590 to 1370 3.7 mm metal .4acf-hie j, k 0 to 2500 -18 to 1370 5.0 mm nonmetal .4acf-loe j, k 600 to 2500 320 to 1370 5.0 mm metal .8acf-loe j, k 300 to 2500 150 to 1370 8.5 mm metal .2/18amf-hie j, k 0 to 2500 -18 to 1370 4.5 x 12.8 mm nonmetal .2/18amf-loe j, k 600 to 2500 320 to 1370 4.5 x 12.8 mm metal .6amf-hie j, k 0 to 2500 -18 to 1370 6.5 mm nonmetal .6amf-loe j, k 700 to 2500 370 to 1370 6.5 mm metal .12amf-loe j, k 400 to 2500 200 to 1370 11.1 mm metal .2/15alf-hie j, k 700 to 3000 370 to 1650 3.0 x 7.2 mm nonmetal .2/15alf-loe j, k 1200 to 3500 650 to 1930 3.0 x 7.2 mm metal .4alf-hie j, k 700 to 3000 370 to 1650 4 mm nonmetal .4alf-loe j, k 1300 to 3500 700 to 1930 4 mm metal .7alf-hie j, k 300 to 3000 150 to 1650 7.2 mm nonmetal .7alf-loe j, k 900 to 3500 480 to 1930 7.2 mm metal .2axlf-hie r, s 1100 to 3500 590 to 1930 1.8 mm nonmetal .2axlf-loe r, s 2200 to 3500 1200 to 1930 1.8 mm metal .4axlf-hie r, s 900 to 3500 480 to 1930 4.8 mm nonmetal .4axlf-loe r, s 1700 to 3500 930 to 1930 4.8 mm metal adjustable models selection table adjustable models selection table
asm gmbh irtc-adj-02/2009 tel.: 08123/986-0 fax: 08123/986-500 www.asm-sensor.de 3 corporation 23 23 23 23 23 51 water street, watertown, ma 02172 usa 800-422-3006 ? 617-923-9900 ? fax 617-923-9911 irt/c models #10-32 mounting holes on a 1.0" (25,4) dia bolt cir., mounting screws provided .073 (1,85) .558 (14,17) .151 (3,84) 1.375 (34,9) dia. t/c wire air purge/cool fitting 4.15 (105,4) 1.40 (35,5) 17 (432) 20 x 1x .80 (20) dia. air purge path range adjustment screw: cw to increase #10-32 mounting holes on a 1.0" (25,4) dia bolt cir., mounting screws provided .073 (1,85) .558 (14,17) .151 (3,84) 1.375 (34,9) dia. range adjustment screw: cw to increase t/c wire air purge/cool fitting 3.34 (84,8) 1.40 (35,5) 8.5 (216) 10 x 1x .80 (20) dia. air purge path adjustable models irt/c.10a 10:1 field-of-view irt/c.20a 20:1 field-of-view irt/c.10a irt/c.20a target surface type hi e (non-metal) lo e (metal) hi e (non-metal) lo e (metal) sensing range -50 to 2500f (-45 to 1370c) 500 to 2500f (260 to 1370c) 500 to 3000f (260 to 1650c) 1000 to 3500f (540 to 1930c) optimum range selections one model each j, k: adjustable over entire sensing range, output tables available minimum spot size at dist. (with supplied apertures) no aperture: 0.8" (20 mm) at <7" (180 mm) ?" aperture: 0.5" (13 mm) at <3.5" (90 mm) ?" aperture: 0.25" (6 mm) at <1" (25 mm) no aperture: 0.8" (20 mm) at <16" (400 mm) ?" aperture: 0.5" (13 mm) at <9" (230 mm) ?" aperture: 0.25" (6 mm) at<3.5" (90 mm) field-of-iew at > min. spot 10:1 (6) approximately 20:1 (3) approximately spectral response 2 to 20 0.1 to 5 2 to 20 0.1 to 5 output impedance 6 to 13 kohms approx 9 to 18 kohms approx 6 to 13 kohms approx 9 to 18 kohms approx cable twisted shielded pair of base thermocouple material (j,k,etc.), 3 ft (.9 m) std length, teflon sheathed, rated to 392f (200c) continuous service. dimensions 3.34" x 1.375" dia. (85 x 35 mm) 4.15" x 1.375" dia. (105 x 35 mm) weight 8.0 oz (230 g) with cable 8.7 oz (248 g) with cable housing stainless steel, hermetically sealed, exceeds nema 4,4x; ip65,67, intrinsically safe, cable shield grounded to housing and electrically isolated from signal. air purge built-in; cooling capacity to 400f (200c) ambient; 3' (0.9 m) polyurethane tubing provided adjustable IR-TC sensors
www.asm-sensor.de irtc-adj-02/2009 asm gmbh tel.: 08123/986-0 fax: 08123/986-500 www.asm-sensor.de 4 corporation 51 water street, watertown, ma 02172 usa 800-422-3006 ? 617-923-9900 ? fax 617-923-9911 24 24 24 24 24 irt/c models adjustable models irt/c.100a 100:1 field-of-view #10-32 mounting holes on a 1.0" (25,4) dia bolt cir., mounting screws provided .073 (1,85) .558 (14,17) .151 (3,84) 1.375 (34,9) dia. range adjustment screw t/c air purge/cool fitting 10.45 (265,4) 1.40 (35,5) 80 (2000) 100 x 1x .80 (20) dia. air purge irt/c.100a target surface type hi e (non-metal) lo e (metal) sensing range 1000 to 5000f (540 to 2760c) 1500 to 5000f (820 to 2760c) optimum range selections one model each r,s: adjustable over entire sensing range, output tables available minimum spot size at distance, with supplied apertures: no aperture: 0.8" (20 mm) at <80" (2000 mm) ?" aperture: 0.5" (13 mm) at <50" (1270 mm) ?" aperture: 0.25" (6 mm) at <25" (635 mm) field-of-view at > min. spot: 100:1 (0.6) approximately spectral response 2 to 20 0.1 to 5 output impedance 6 to 13 kohms approx 9 to 18 kohms approx cable twisted shielded pair of base thermocouple material (r,s,etc.), 3 ft (.9 m) std length, teflon sheathed, rated to 392f (200c) continuous service. dimensions 10.5" x 1.375" dia. (265 x 35 mm) weight 20 oz (570 g) with cable housing stainless steel, hermetically sealed, exceeds nema 4,4x; ip65,67, intrinsically safe, cable shield grounded to housing and electrically isolated from signal. air purge built-in; cooling capacity to 400f (200c) ambient; 3' (0.9 m) polyurethane tubing provided adjustable IR-TC sensors
asm gmbh irtc-adj-02/2009 tel.: 08123/986-0 fax: 08123/986-500 www.asm-sensor.de 5 corporation 25 25 25 25 25 51 water street, watertown, ma 02172 usa 800-422-3006 ? 617-923-9900 ? fax 617-923-9911 irt/c models close focus, 0.11" (2.9 mm) spot irt/c.2acf adjustable models irt/c.2/15acf close focus slot spot #10-32 mounting holes on a 1.0" (25,4) dia bolt cir., .073 (1,85) .558 (14,17) .151 (3,84) 1.375 (34,9) dia. range adjustment screw t/c wire air purge/cool fitting 2.02 (51,3) 1.7 (43) air purge path ~30 mounting screws provided spot size is 0.11" (2.9 mm) at focal plane. spot size increases with approx 30 deg included angle away from focal plane. 0.11" (2.9 mm) dia #10-32 mounting holes on a 1.0" (25,4) dia bolt cir., .073 (1,85) .558 (14,17) .151 (3,84) 1.375 (34,9) dia. range adjustment screw t/c wire air purge/cool fitting 2.02 (51,3) 1.7 (43) air purge path ~30 o mounting screws provided lines indicating long axis of view spot size is 0.11 x 0.35" (2.9 x 8.7 mm) rectangle at focal plane. spot size increases with approx 30 deg included angle away from focal plane. irt/c.2acf irt/c.2/15acf target surface type hi e (non-metal) lo e (metal) hi e (non-metal) lo e (metal) sensing range 500 to 2500f (260 to 1370c) 1000 to 2500f (540 to 1370c) 0 to 2500f (-18 to 1370c) 500 to 2500f (260 to 1370c) optimum range selections one model each j, k: adjustable over entire sensing range, output tables available minimum spot size at focus: 0.11" (2.9 mm) at 1.7" (43 mm) from sensor 0.11 x 0.35" (2.9 x 8.7 mm) at 1.7" (43 mm) from sensor field-of-view non-focus: 30 approximately 30 approximately spectral response 2 to 20 0.1 to 5 2 to 20 0.1 to 5 output impedance 4 to 8 kohms (varies by model) 10 kohms approx cable twisted shielded pair of base thermocouple material (j,k,etc.), 3 ft (.9 m) std length, teflon sheathed, rated to 392f (200c) continuous service. dimensions 2.02" x 1.375" dia. (51.3 x 35 mm) 2.02" x 1.375" dia. (51.3 x 35 mm) weight 6.8 oz (192 g) with cable 6.8 oz (192 g) with cable housing stainless steel, hermetically sealed, exceeds nema 4,4x; ip65,67, intrinsically safe, cable shield grounded to housing and electrically isolated from signal. air purge built-in; cooling capacity to 400f (200c) ambient; 3' (0.9 m) polyurethane tubing provided adjustable IR-TC sensors
www.asm-sensor.de irtc-adj-02/2009 asm gmbh tel.: 08123/986-0 fax: 08123/986-500 www.asm-sensor.de 6 corporation 51 water street, watertown, ma 02172 usa 800-422-3006 ? 617-923-9900 ? fax 617-923-9911 26 26 26 26 26 irt/c models irt/c.4acf close focus 0.20" (5.0 mm) spot adjustable models irt/c.8acf close focus 0.33" (8.5 mm) spot #10-32 mounting holes on a 1.0" (25,4) dia bolt cir., .073 (1,85) .558 (14,17) .151 (3,84) 1.375 (34,9) dia. range adjustment screw t/c wire air purge/cool fitting 2.02 (51,3) 1.7 (43) air purge path ~30 o mounting screws provided spot size is 0.20" (5.0 mm) at focal plane. spot size increases with approx 30 deg included angle away from focal plane. 0.20" (5.0 mm) dia #10-32 mounting holes on a 1.0" (25,4) dia bolt cir., .073 (1,85) .558 (14,17) .151 (3,84) 1.375 (34,9) dia. range adjustment screw t/c wire air purge/cool fitting 2.02 (51,3) 1.7 (43) air purge path ~30 o mounting screws provided spot size is 0.33" (8.5 mm) at focal plane. spot size increases with approx 30 deg included angle away from focal plane. 0.33" (8.5 mm) dia irt/c.4acf irt/c.8acf target surface type hi e (non-metal) lo e (metal) lo e (metal) sensing range 0 to 2500f (-18 to 1370c) 600 to 2500f (320 to 1370c) 300 to 2500f (150 to 1370c) optimum range selections one model each j, k: adjustable over entire sensing range, output tables available minimum spot size at focus 0.20" (5.0 mm) at 1.7" (43 mm) from sensor 0.33" (8.5 mm) at 1.7" (43 mm) from sensor field-of-view (non-focus) 30 approximately 30 approximately spectral response 2 to 20 0.1 to 5 0.1 to 5 output impedance 4 to 8 kohms (varies by model) 10 kohms approx cable twisted shielded pair of base thermocouple material (j,k,etc.), 3 ft (.9 m) std length, teflon sheathed, rated to 392f (200c) continuous service. dimensions 2.02" x 1.375" dia. (51.3 x 35 mm) weight 6.8 oz (192 g) with cable housing stainless steel, hermetically sealed, exceeds nema 4,4x; ip65,67, intrinsically safe, cable shield grounded to housing and electrically isolated from signal. air purge built-in; cooling capacity to 400f (200c) ambient; 3' (0.9 m) polyurethane tubing provided adjustable IR-TC sensors
asm gmbh irtc-adj-02/2009 tel.: 08123/986-0 fax: 08123/986-500 www.asm-sensor.de 7 corporation 27 27 27 27 27 51 water street, watertown, ma 02172 usa 800-422-3006 ? 617-923-9900 ? fax 617-923-9911 irt/c models irt/c.2/18amf medium focus slot spot irt/c.3amf medium focus 0.12" (3 mm) spot adjustable models #10-32 mounting holes on a 1.0" (25,4) dia bolt cir., .073 (1,85) .558 (14,17) .151 (3,84) 1.375 (34,9) dia. range adjustment screw t/c wire air purge/cool fitting 2.97 (75,3) 2.76 (70,1) air purge path ~13 o mounting screws provided lines indicating long axis of view 0.18 (4.5 mm) 0.5 (12.8 mm) spot size is 0.18 x 0.5" 4.5 x 12.8 mm) rectangle at focal plane. spot size increases with approx 13 deg included angle away from focal plane. #10-32 mounting holes on a 1.0" (25,4) dia bolt cir., .073 (1,85) .558 (14,17) .151 (3,84) 1.375 (34,9) dia. range adjustment screw t/c wire air purge/cool fitting 2.97 (75,3) 2.76 (70,1) air purge path ~13 o mounting screws provided spot size is 0.12" (3 mm) dia. at focal plane. spot size increases with approx 13 deg included angle away from focal plane. irt/c.2/18amf irt/c.3amf target surface type hi e (non-metal) lo e (metal) hi e (non-metal) lo e (metal) sensing range 0 to 2500f (-18 to 1370c) 600 to 2500f (320 to 1370c) 500 to 2500f (260 to 1370c) 1100 to 2500f (590 to 1370c) optimum range selections one model each j, k: adjustable over entire sensing range, output tables available minimum spot size at focus 0.18 x 0.5" (4.5 x 12.8 mm) at 3" (76 mm) from sensor 0.15" (3.7 mm) at 3" (76 mm) from sensor field-of-view (non-focus) 13 approximately spectral response 2 to 20 0.1 to 5 2 to 20 0.1 to 5 output impedance 10 kohms approx cable twisted shielded pair of base thermocouple material (j,k,etc.), 3 ft (.9 m) std length, teflon sheathed, rated to 392f (200c) continuous service. dimensions 2.97" x 1.375" dia. (75.3 x 35 mm) weight 6.8 oz (192 g) with cable housing stainless steel, hermetically sealed, exceeds nema 4,4x; ip65,67, intrinsically safe, cable shield grounded to housing and electrically isolated from signal. air purge built-in; cooling capacity to 400f (200c) ambient; 3' (0.9 m) polyurethane tubing provided adjustable IR-TC sensors
www.asm-sensor.de irtc-adj-02/2009 asm gmbh tel.: 08123/986-0 fax: 08123/986-500 www.asm-sensor.de 8 corporation 51 water street, watertown, ma 02172 usa 800-422-3006 ? 617-923-9900 ? fax 617-923-9911 28 28 28 28 28 irt/c models adjustable models irt/c.6amf medium focus 0.26" (6.5 mm) spot irt/c.12amf medium focus 0.48" (11.1 mm) spot #10-32 mounting holes on a 1.0" (25,4) dia bolt cir., .073 (1,85) .558 (14,17) .151 (3,84) 1.375 (34,9) dia. range adjustment screw t/c wire air purge/cool fitting 2.97 (75,3) 2.76 (70,1) air purge path ~13 o mounting screws provided spot size is 0.26" (6.5 mm) dia. at focal plane. spot size increases with approx 13 deg included angle away from focal plane. #10-32 mounting holes on a 1.0" (25,4) dia bolt cir., .073 (1,85) .558 (14,17) .151 (3,84) 1.375 (34,9) dia. range adjustment screw t/c wire air purge/cool fitting 2.97 (75,3) 2.76 (70,1) air purge path ~13 o mounting screws provided spot size is 0.48" (11,1 mm) dia. at focal plane. spot size increases with approx 13 deg included angle away from focal plane. irt/c.6amf irt/c.12amf target surface type hi e (non-metal) lo e (metal) lo e (metal) sensing range 0 to 2500f (-18 to 1370c) 700 to 2500f (370 to 1370c) 400 to 2500f 200 to 1370c) optimum range selections one model each j, k: adjustable over entire sensing range, output tables available minimum spot size at focus 0.26" (6.5 mm) at 3" (76 mm) from sensor 0.48" (11.1 mm) at 3" (76 mm) from sensor field-of-view (non-focus) 13 approximately spectral response 2 to 20 0.1 to 5 0.1 to 5 output impedance 10 kohms approx cable twisted shielded pair of base thermocouple material (j,k,etc.), 3 ft (.9 m) std length, teflon sheathed, rated to 392f (200c) continuous service. dimensions 2.97" x 1.375" dia. (75.3 x 35 mm) weight 6.8 oz (192 g) with cable housing stainless steel, hermetically sealed, exceeds nema 4,4x; ip65,67, intrinsically safe, cable shield grounded to housing and electrically isolated from signal. air purge built-in; cooling capacity to 400f (200c) ambient; 3' (0.9 m) polyurethane tubing provided adjustable IR-TC sensors
asm gmbh irtc-adj-02/2009 tel.: 08123/986-0 fax: 08123/986-500 www.asm-sensor.de 9 corporation 29 29 29 29 29 51 water street, watertown, ma 02172 usa 800-422-3006 ? 617-923-9900 ? fax 617-923-9911 irt/c models adjustable models irt/c.4alf long focus 0.14" (3.5 mm) spot irt/c.2/15alf long focus slot spot (3 x 7.2 mm) rectangle at focal plane. spot size increases with approx 11 deg inlcluded angle away from focal plane. spot size is 0.12 x 0.28" #10-32 mounting holes on a 1.0" (25,4) dia bolt cir., .073 (1,85) .558 (14,17) .151 (3,84) 1.375 (34,9) dia. range adjustment screw t/c wire air purge/cool fitting 3.34 (84,8) 4.1 (105) air purge path ~11 o mounting screws provided lines indicating long axis of view #10-32 mounting holes on a 1.0" (25,4) dia bolt cir., .073 (1,85) .558 (14,17) .151 (3,84) 1.375 (34,9) dia. range adjustment screw t/c wire air purge/cool fitting 3.34 (84,8) 4.1 (105) air purge path ~11 o mounting screws provided spot size is 0.14 (3.5 mm) dia. at focal plane. spot size increases with approx 11 deg included angle away from focal plane. irt/c.2/15alf irt/c.4alf target surface type hi e (non-metal) lo e (metal) hi e (non-metal) lo e (metal) sensing range 700 to 3000f (370 to 1650c) 1200 to 3500f (650 to 1930c) 700 to 3000f (370 to 1650c) 1200 to 3500f (700 to 1930c) optimum range selections one model each j, k: adjustable over entire sensing range, output tables available minimum spot size at focus 0.12 x 0.28" (3 x 7.2 mm) at 4.1" (105 mm) from sensor 0.14" (35 mm) at 4.1" (105 mm) from sensor field-of-view (non-focus) 11 approximately spectral response 2 to 20 0.1 to 5 2 to 20 0.1 to 5 output impedance 10 kohms approx cable twisted shielded pair of base thermocouple material (j,k,etc.), 3 ft (.9 m) std length, teflon sheathed, rated to 392f (200c) continuous service. dimensions 3.34" x 1.375" dia. (84.8 x 35 mm) weight 8.7 oz (248 g) with cable housing stainless steel, hermetically sealed, exceeds nema 4,4x; ip65,67, intrinsically safe, cable shield grounded to housing and electrically isolated from signal. air purge built-in; cooling capacity to 400f (200c) ambient; 3' (0.9 m) polyurethane tubing provided adjustable IR-TC sensors
www.asm-sensor.de irtc-adj-02/2009 asm gmbh tel.: 08123/986-0 fax: 08123/986-500 www.asm-sensor.de 10 corporation 51 water street, watertown, ma 02172 usa 800-422-3006 ? 617-923-9900 ? fax 617-923-9911 30 30 30 30 30 irt/c models #10-32 mounting holes on a 1.0" (25,4) dia bolt cir., .073 (1,85) .558 (14,17) .151 (3,84) 1.375 (34,9) dia. range adjustment screw t/c wire air purge/cool fitting 3.34 (84,8) 4.1 (105) air purge path ~11 o mounting screws provided spot size is 0.28" (7.2 mm) dia. at focal plane. spot size increases with approx 11 deg inlcluded angle away from focal plane. adjustable models irt/c.7alf long focus 0.3" (7 mm) spot irt/c.7alf target surface type hi e (non-metal) lo e (metal) sensing range 300 to 3000f (150 to 1650c) 900 to 3500f (480 to 1930c) optimum range selections one model each j, k: adjustable over entire sensing range, output tables available minimum spot size at focus 0.28" (7.2 mm) at 4.1" (105 mm) from sensor field-of-view (non-focus) 11 approximately spectral response 2 to 20 0.1 to 5 output impedance 10 kohms approx cable twisted shielded pair of base thermocouple material (j,k,etc.), 3 ft (.9 m) std length, teflon sheathed rated to 392f (200c) continuous service. dimensions 3.34" x 1.375" dia. (84.8 x 35 mm) weight 8.7 oz (248 g) with cable housing stainless steel, hermetically sealed, exceeds nema 4,4x; ip65,67, intrinsically safe, cable shield grounded to housing and electrically isolated from signal. air purge built-in; cooling capacity to 400f (200c) ambient; 3' (0.9 m) polyurethane tubing provided adjustable IR-TC sensors
asm gmbh irtc-adj-02/2009 tel.: 08123/986-0 fax: 08123/986-500 www.asm-sensor.de 11 corporation 31 31 31 31 31 51 water street, watertown, ma 02172 usa 800-422-3006 ? 617-923-9900 ? fax 617-923-9911 irt/c models adjustable models irt/c.2axlf extra long focus 0.07" (1.8 mm) spot irt/c.4axlf extra long focus 0.19" (4.8 mm) spot #10-32 mounting holes on a 1.0" (25,4) dia bolt cir., .073 (1,85) .558 (14,17) .151 (3,84) 1.375 (34,9) dia. range adjustment screw t/c wire air purge/cool fitting 8.375 (213) .151 (1,85) 8.0 (203) air purge path ~5 o mounting screws provided spot size is 0.07 (1.8 mm) dia. at focal plane. spot size increases with approx 5 deg included angle away from focal plane. #10-32 mounting holes on a 1.0" (25,4) dia bolt cir., .073 (1,85) .558 (14,17) .151 (3,84) 1.375 (34,9) dia. range adjustment screw t/c wire air purge/cool fitting 8.375 (213) .151 (1,85) 8.0 (203) air purge path ~5 o mounting screws provided spot size is 0.14 (3.5 mm) dia. at focal plane. spot size increases with approx 5 deg included angle away from focal plane. irt/c.2axlf irt/c.4axlf target surface type hi e (non-metal) lo e (metal) hi e (non-metal) lo e (metal) sensing range 1100 to 3500f (590 to 1930c) 2200 to 3500f (1200 to 1930c) 900 to 3500f (480 to 1930c) 1700 to 3500f (930 to 1930c) optimum range selections one model each r, s: adjustable over entire sensing range, output tables available minimum spot size at focus 0.07" (1.8 mm) at 8" (200 mm) from sensor 0.19" (4.8 mm) at 8" (200 mm) from sensor field-of-view (non-focus) 5 approximately spectral response 2 to 20 0.1 to 5 2 to 20 0.1 to 5 output impedance 10 kohms approx cable twisted shielded pair of base thermocouple material (j,k,etc.), 3 ft (.9 m) std length, teflon sheathed, rated to 392f (200c) continuous service. dimensions 8.375" x 1.375" dia. (213 x 35 mm) weight 20 oz (570 g) with cable housing stainless steel, hermetically sealed, exceeds nema 4,4x; ip65,67, intrinsically safe, cable shield grounded to housing and electrically isolated from signal. air purge built-in; cooling capacity to 400f (200c) ambient; 3' (0.9 m) polyurethane tubing provided adjustable IR-TC sensors
? by asm gmbh moosinning. ?nderungen und irrtmer vorbehalten. schutzvermerk din34 beachten. 02.2009 asm gmbh am bleichbach 18 - 22 85452 moosinning deutschland tel. +49-(0)8123-986-0 fax +49-(0)8123-986-500 info@asm-sensor.de www.asm-sensor.de

▲Up To Search▲

Price & Availability of IR-TC

	To Download IR-TC Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .