l = low range [f l to 10 f l ] m = mid range [10 f l to f u /2] u= upper range [f u /2 to f u ] freq. range (mhz) isolation (db) insertion loss (db) above 3.0 db phase unbalance (degrees) amplitude unbalance (db) f l -f u l m u l m u l m u l m u ty p. min ty p. min ty p. min ty p. max. ty p. max. ty p. max. max. max. max. max. max. max. 5-1000 25 17 25 16 21 16 0.3 0.9 0.5 0.9 0.5 1.4 4.0 4.0 6.0 0.6 0.6 0.3 TCP-2-10X+ 2 way-0 50 ? 5 to 1000 mhz power splitter/combiner surface mount typical performance data electrical specifcations maximum ratings operating temperature -40c to 85c storage temperature -55c to 100c power input (as a splitter) 0.5w max. rev. a m151107 TCP-2-10X+ ed-8261/1 dy/td/cp 151008 case style: db1627 features ? low insertion, 0.5 db typ. ? excellent amplitude unbalance, 0.1 db typ. ? very good phase unbalance, 1.0 deg. typ. ? external resistor & capacitor required ? aqueous washable ? leads for excellent solderability ? low cost applications ? cellular ? vhf/uhf ? communications systems pin connections sumport 6 port 1 3 port 2 4 ground 1 connect 2,5 ext. resistor 100 ? 3,4 ext. capacitor 1.5pf 2 to gnd 5 to gnd demo board mcl p/n: tb-232 suggested pcb layout (pl-001) total loss 3.0 3.2 3.4 3.6 3.8 4.0 0 200 400 600 800 1000 frequency (mhz) total loss (db) s-1(db) s-2(db) isolation 15 20 25 30 35 40 0 200 400 600 800 1000 frequency (mhz) isolation (db) vswr 1.00 1.05 1.10 1.15 1.20 1.25 0 200 400 600 800 1000 frequency (mhz) vswr #s-vswr #1-vswr #2-vswr frequency (mhz) total loss 1 (db) amplitude unbalance (db) isolation (db) phase unbalance (deg.) vswr s vswr 1 vswr 2 s-1 s-2 5.00 3.10 3.24 0.14 32.43 0.15 1.02 1.11 1.14 6.00 3.10 3.24 0.14 32.64 0.15 1.02 1.11 1.14 8.00 3.10 3.24 0.14 32.81 0.09 1.02 1.10 1.14 10.00 3.11 3.24 0.13 32.85 0.09 1.02 1.10 1.14 25.00 3.12 3.25 0.14 32.38 0.01 1.02 1.10 1.14 40.00 3.13 3.27 0.14 31.84 0.06 1.02 1.10 1.14 60.00 3.13 3.28 0.14 31.23 0.09 1.03 1.10 1.13 90.00 3.15 3.29 0.14 30.38 0.10 1.03 1.10 1.13 120.00 3.16 3.30 0.14 29.54 0.11 1.04 1.09 1.13 200.00 3.19 3.33 0.14 27.50 0.24 1.05 1.09 1.11 400.00 3.27 3.40 0.13 23.84 0.45 1.07 1.06 1.06 600.00 3.37 3.48 0.11 21.78 0.71 1.09 1.05 1.02 800.00 3.49 3.58 0.09 20.95 0.98 1.09 1.08 1.09 900.00 3.55 3.63 0.08 21.06 1.15 1.09 1.12 1.14 1000.00 3.63 3.70 0.07 21.68 1.29 1.08 1.16 1.20 permanent damage may occur if any of these limits are exceeded. 1. total loss = insertion loss + 3db splitter loss. electrical schematic outline drawing outline dimensions ( ) inch mm abcde f .160 .150 .160 .050 .040 .025 4.06 3.81 4.06 1.27 1.02 0.64 gh j k wt .028 .065 .190 .030 grams 0.71 1.65 4.83 0.76 0.15 total thickness: .013 inches max. sugg ested l a y o ut, t ol eranc e t o be withi n .002 pcb land patter n a vailable t ape and reel at no extra cost reel size devices/reel 7? 20, 50, 100, 200, 500 13? 1000, 2000 top hat ? notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
|