rf micro devices inc . 7628 thorndike road, greensboro, nc 27409 - 9421 ds 140313 for sales or technical support, contact rfmd at +1.336.678.5570 or customerservice@rfmd.com . rf micro devices ? and rfmd ? are trademarks of rfmd, llc. bluetooth is a trademark owned by bluetooth sig, inc., u.s.a. and licensed for use by rfmd. all other trade names, trademarks, and registered trademarks are the property of their respective owners. ?2013, rf micro devices, inc. 1 of 3 ps - 4 - 500f four - way power divider /combiner 5 mhz to 5 00 mh z the ps - 4 series is comprised of one 500mhz 4 way divider and two 1000mhz 4 way dividers, either bandwidth is available in either flatpack or sma equipped packages . these dividers are known for their excellent amplitude and phase tracking over wide bandwidths. a signal at the input divides into four equal, in - phase signals at the outputs. four signals at the outputs combine vectorially at the input connector. functional schematic package: flatpack features low insertion loss high isolation applications milcom electronic warfare industrial, scientific, medical aerospace avionics military and civilian radar satellite communications ordering information contact rfmd authorized sales agent or factory. ps - 4 - 500f
rf micro devices inc . 7628 thorndike road, greensboro, nc 27409 - 9421 ds 140313 for sales or technical support, contact rfmd at +1.336.678.5570 or customerservice@rfmd.com . the information in this publication is believed to be accurate. however, no responsibility is assumed by rf micro d evices, inc. ("rfmd") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. no license is granted by implication or otherwise under any patent or patent rights of rfmd. rfmd reserves the right to change c omponent circuitry, recommended application circuitry and specifications at any time without prior notice. 2 of 3 ps - 4 - 500f absolute maximum rat ings parameter rating unit operating temperature range - 54 to + 100 c input power (1/20 watt internal load dissipation) 1 w caution! esd sensitive device. exceeding any one or a combination of the absolute maximum rating conditions may cause permanent damage to the device. extended application of absolute maximum rating conditions to the device may reduce device reliability. specified typical performance or functional operation of the device under absolute maximum rating conditions is not implied. environmental conditions guaranteed environmental performance: all units are designed to meet their specifications between - 54c and +100c after exposure to any or all of the following tests per mil - std - 202e. ? thermal shock: method 107d, test condition b ? altitude: method 105c, test condition g ? h.f. vibration: method 204c, test condition d ? mechanical shock: method 213b, test condition c ? random vibration (15 minutes per axis): method 214, test condition iif ? solderability: method 208c ? terminal strength: method 211a, test condition c ? resistance to soldering heat: method 210a, test condition b sealed units meet the requirements of method 106d of mil - std - 202e when expose d to humidity. nominal operating parameters parameter specification unit condition min typ max general performance - 1db bandwidth 5 500 mhz midband insertion loss 0. 50 db amplitude unb alance 0.2 db phase unbalance 2 isolation 20 db vswr 1 .4 specifications subject to change without notice.
rf micro devices inc . 7628 thorndike road, greensboro, nc 27409 - 9421 ds 140313 for sales or technical support, contact rfmd at +1.336.678.5570 or customerservice@rfmd.com . the information in this publication is believed to be accurate. however, no responsibility is assumed by rf micro d evices, inc. ("rfmd") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. no license is granted by implication or otherwise under any patent or patent rights of rfmd. rfmd reserves the right to change c omponent circuitry, recommended application circuitry and specifications at any time without prior notice. 3 of 3 ps - 4 - 500f typical performance package drawing case material : f - 15 kovar per astm s tandard f - 1 5 - 68 (chemical composition per mil - std - 1276, type k) finish: p lating, all metal parts: gold per mil - g - 45204, type 1, grade a, class 1 over nickel per mil - c - 26074, class 1 leads: kovar per mil - std - 1276, ty pe k
|
