maximum ratings operating temperature -55c to 85c storage temperature -55c to 100c absolute max. supply voltage (vcc) 13v absolute max. tuning voltage (vtune) 18v all specifcations 50 ohm system electrical specifcations rev. c m152326 edr-7306/1 ZX95-100+ rav/urj 150923 page 1 of 2 coaxial voltage controlled oscillator linear tuning 50 to 100 mhz ? linear tuning ? octave bandwidth ? low phase noise ? low pushing & pulling ? excellent harmonic suppression ? protected by us patent 6,790,049 features ? r & d ? lab ? instrumentation ? test equipment applications model freq. power phase noise tuning non harmonics pulling pushing dc no. (mhz) output dbc/hz ssb at offset harmonic (dbc) pk-pk (mhz/v) operating (dbm) frequencies,khz voltage sensi- port 3 db spurious @12 dbr power range tivity cap modulation (dbc) (mhz) typ. (v) (mhz/v) (pf) bandwidth vcc current (mhz) (volts) (ma) min. max. typ. 1 10 100 1000 min. max. typ. typ. typ. typ. typ. max. typ. typ. max. ZX95-100 + 50 100 +10 -86 -110 -131 -151 0.5 17 3.5-4.5 550 0.18 -90 -33 -24 0.4 0.1 12 20 ZX95-100+ permanent damage may occur if any of these limits are exceeded. case style: gb956 connectors model sma ZX95-100-s+ outline drawing outline dimensions ( ) inch mm a b c d e f g h j k l m n p q r s t wt. 1.20 .75 .46 1.18 .04 .38 .38 .57 .18 .33 .21 .22 .18 1.00 .50 .35 .18 .106 grams 30.48 19.05 11.68 29.97 1.02 9.65 9.65 14.48 4.57 8.38 5.33 5.59 4.57 25.40 12.70 8.89 4.57 2.69 35.0 http:// www .minicircuits .com/app/an40-010.pd f http:// www .minicircuits .com/app/an40-010.pd f http:// www .minicircuits .com/app/an40-010.pd f note: when soldering the dc connections, caution must be used to avoi d overheating the dc terminals. see application note an-40-10 . ! notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
performance data & curves* *at 25 o c unless mentioned otherwise ZX95-100+ frequency and tuning sensitivity 40 50 60 70 80 90 100 110 120 0 5 10 15 tuning voltage (v) frequency (mhz) 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 tuning sensitivity (mhz/v) freq. @ -55c freq. @ +25c freq. @ +85c t.sens @ +25c ZX95-100+ power output 6 7 8 9 10 11 0 5 10 15 tuning voltage (v) output power (dbm) -55c +25c +85c ZX95-100+ harmonics level -55 -50 -45 -40 -35 -30 -25 0 5 10 15 tuning voltage (v) harmonics (dbc) f2 f3 f4 ZX95-100+ frequency pulling & pushing (supply voltage 12v for pulling) 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0 5 10 15 tuning voltage (v) pushing (mhz/v) 0.0 0.1 0.2 0.3 0.4 0.5 0.6 pulling (mhz) pulling pushing ZX95-100+ phase noise vs. tuning voltage -160 -150 -140 -130 -120 -110 -100 -90 -80 0 5 10 15 tuning voltage (v) phase noise (dbc/hz) 1khz 10khz 100khz 1mhz ZX95-100+ phase noise -160 -150 -140 -130 -120 -110 -100 -90 -80 1 10 100 1000 frequency offset (khz) phase noise (dbc/hz) ZX95-100+ page 2 of 2 v tune frequency power output icc harmonics (dbc) phase noise (dbc/hz) (dbm) pull at offsets offset noise at (mhz/v) (mhz/v) c c c c c c (dbc/hz) 0.00 4.96 45.2 44.1 44.0 8.02 7.46 6.55 16.08 -37.0 -38.2 -52.0 0.04 0.05 -84.1 -105.4 -126.9 -150.0 1.0 -85.44 0.50 4.54 47.2 46.6 46.7 8.98 8.54 7.74 15.81 -36.8 -39.3 -52.4 0.00 0.09 -86.9 -109.1 -129.7 -152.3 2.0 -92.96 1.00 4.63 49.3 48.9 49.1 9.71 9.39 8.71 15.47 -37.2 -39.6 -52.6 0.10 0.11 -87.4 -112.9 -132.1 -154.4 3.5 -98.98 2.00 3.72 53.4 53.2 53.4 10.06 9.96 9.41 15.16 -37.5 -38.0 -52.1 0.02 0.06 -88.6 -113.2 -132.8 -153.7 6.0 -104.43 3.00 3.49 56.9 56.9 57.0 10.18 10.03 9.52 14.98 -30.8 -37.3 -50.4 0.03 0.03 -88.8 -112.1 -132.4 -153.2 8.5 -108.14 4.00 3.48 60.3 60.3 60.5 10.23 10.02 9.52 14.88 -29.2 -37.2 -48.4 0.06 0.05 -87.0 -112.2 -131.7 -152.4 10.0 -108.56 5.00 3.58 63.7 63.8 64.0 10.23 9.99 9.46 14.82 -28.9 -37.0 -46.5 0.08 0.07 -86.0 -111.0 -131.1 -151.2 20.8 -115.56 6.00 3.70 67.3 67.4 67.6 10.20 9.94 9.38 14.79 -29.4 -36.7 -44.9 0.08 0.06 -85.8 -110.1 -130.5 -150.7 35.5 -120.41 7.00 3.80 71.1 71.2 71.3 10.14 9.85 9.27 14.79 -30.2 -36.4 -43.3 0.06 0.03 -85.7 -108.8 -129.9 -150.3 60.7 -125.52 8.00 3.86 74.9 75.0 75.2 10.06 9.73 9.14 14.79 -31.0 -36.2 -42.2 0.04 0.01 -86.9 -108.8 -129.7 -149.5 86.7 -128.28 9.00 3.87 78.9 78.8 79.1 9.98 9.61 9.00 14.80 -31.8 -36.1 -41.5 0.02 0.01 -84.8 -109.4 -128.9 -149.5 100.0 -129.57 10.00 3.89 83.0 82.7 82.9 9.88 9.49 8.83 14.80 -32.5 -36.0 -40.9 0.01 0.05 -84.5 -108.4 -129.4 -149.5 148.1 -132.77 11.00 3.95 87.1 86.6 86.8 9.75 9.33 8.62 14.79 -33.3 -35.7 -40.8 0.04 0.14 -86.3 -109.9 -130.1 -149.9 211.6 -135.82 12.00 4.07 91.3 90.6 90.7 9.60 9.13 8.36 14.77 -34.2 -35.6 -40.6 0.06 0.20 -85.5 -110.7 -130.4 -150.2 361.5 -140.42 13.00 4.23 95.5 94.7 94.7 9.42 8.90 8.06 14.75 -35.3 -35.5 -39.8 0.07 0.27 -86.9 -110.0 -130.6 -150.7 432.2 -141.86 14.00 4.41 99.9 99.0 98.9 9.22 8.63 7.73 14.72 -36.5 -35.1 -39.2 0.10 0.41 -85.6 -108.5 -129.3 -150.2 507.5 -143.36 15.00 4.59 104.5 103.4 103.3 8.98 8.32 7.36 14.69 -37.3 -34.8 -38.2 0.15 0.39 -86.7 -107.9 -128.5 -149.7 600.0 -144.84 16.00 4.73 109.2 108.1 107.9 8.73 7.99 6.98 14.65 -37.1 -34.2 -37.0 0.23 0.48 -87.8 -106.0 -127.2 -148.9 712.4 -146.08 16.50 4.78 111.6 110.4 110.2 8.59 7.81 6.78 14.64 -36.8 -33.7 -36.5 0.28 0.54 -87.9 -106.2 -126.8 -148.1 851.6 -148.09 17.00 4.78 114.0 112.8 112.5 8.45 7.63 6.57 14.62 -36.3 -33.3 -35.9 0.34 0.59 -81.9 -104.1 -126.0 -147.6 1000.0 -149.73 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com
|