dil sockets series 160 160-pp-316-00-001101 2.54 mm, solder tail, slotted head dil headers with slotted head to accept wires or component leads technical specs.: insulator black glass filled polyester pct-gf30-fr flammability ul 94v-o contact brass cuzn36pb3 (c36000) connecting pin ? 0.5 mm mechanical life min. 100 cycles rated current 1 a dielectric strength min. 1000 v rms ordering information: ?pp plating code ?termination connecting pin 10 ?gold 0.25 m ?gold 0.25 m 80 ?tin ?tin advanced information: order codes poles a b c d e see 160-pp-210-00-001101 10 12.6 5.08 7.6 160-pp-304-00-001101 4 5.0 7.62 10.1 160-pp-306-00-001101 6 7.6 7.62 10.1 160-pp-308-00-001101 8 10.1 7.62 10.1 160-pp-310-00-001101 10 12.6 7.62 10.1 160-pp-312-00-001101 12 15.2 7.62 10.1 160-pp-314-00-001101 14 17.7 7.62 10.1 160-pp-316-00-001101 16 20.3 7.62 10.1 preci-dip sa rue saint-henri 11 p.p.box 834 ch-2800 delmont / switzerland phone +41 (0)32 421 04 00 fax +41 (0)32 421 04 01 e-mail sales@precidip.com www.precidip.com
160-pp-318-00-001101 18 22.8 7.62 10.1 160-pp-320-00-001101 20 25.3 7.62 10.1 160-pp-322-00-001101 22 27.8 7.62 10.1 160-pp-324-00-001101 24 30.4 7.62 10.1 160-pp-328-00-001101 28 35.5 7.62 10.1 160-pp-420-00-001101 20 25.4 10.16 12.6 160-pp-422-00-001101 22 27.8 10.16 12.6 160-pp-424-00-001101 24 30.4 10.16 12.6 160-pp-428-00-001101 28 35.5 10.16 12.6 160-pp-432-00-001101 32 40.6 10.16 12.6 160-pp-610-00-001101 10 12.7 15.24 17.7 160-pp-624-00-001101 24 30.5 15.24 17.7 160-pp-628-00-001101 28 35.5 15.24 17.7 160-pp-632-00-001101 32 40.6 15.24 17.7 160-pp-636-00-001101 36 45.7 15.24 17.7 160-PP-640-00-001101 40 50.8 15.24 17.7 160-pp-642-00-001101 42 53.3 15.24 17.7 160-pp-648-00-001101 48 60.9 15.24 17.7 160-pp-650-00-001101 50 63.5 15.24 17.7 160-pp-652-00-001101 52 66.0 15.24 17.7 160-pp-950-00-001101 50 63.5 22.86 25.3 160-pp-952-00-001101 52 66.0 22.86 25.3 160-pp-964-00-001101 64 81.2 22.86 25.3 preci-dip sa rue saint-henri 11 p.p.box 834 ch-2800 delmont / switzerland phone +41 (0)32 421 04 00 fax +41 (0)32 421 04 01 e-mail sales@precidip.com www.precidip.com
technical assistance general specifications: the values listed below are general specs applying for preci-dip dil sockets. please see individual catalog page for additional and product specific technical data. operating temperature range -55 ... +125 c climatic category (iec) 55/125/21 operating humidity range annual mean 75 % max working voltage 100 vrms/150 vdc preci-dip sockets are recognized by underwriters laboratories inc. and listed under "connectors for use in data, signal, control and power applications", file nr. e174442. mechanical characteristics: clip retention min. 40 n (no displacement under axial force applied) contact (sleeve / clip) retention min. 3.3 n acc. to mil-dtl-83734, pt 4.6.4.2 electrical characteristics: insulation resistance between any two adjacent contacts min. 10'000 m at 500 v ac capacitance between any two adjacent contacts max. 1 pf air and creepage distances between any two adjacent contacts min. 0.6 mm (min. 0.2 mm for shrink-dip sockets) environmental characteristics: the sockets withstand the following environmental tests without mechanical and electrical defects: - dry heat steady state iec 60512-11-9.11i / 60068-2-2.bb: 125 c, 16h - damp heat cyclic iec 60512-11-12.11m / 60068-2-30.db: 25/55 c, 90 ? 100 %rh, 1 cycle of 24 h - cold steady state iec 60512-11-10.11j / 60068-2-1.a: -55 c, 2 h - thermal shock iec 60512-11-4.11d / 60068-2-14.na: -55/125 c, 5 cycles 30 min - sinusoidal vibrations iec 60512-6-4.6d / 60068-2-6.fc: 10 to 500 hz, 10 g, 1 octave/min, 10 cycles for each axis - shock iec 60512-6-3.6c / 60068-2-27.ea: 50 g, 11 ms, 3 shocks in three axis during the above two tests no contact interruption >50 ns does appear. - solderability j-std-002a, test a, 245c, 5 s solder alloy snag3.8cu0.7 - resistance to soldering heat j-std-0020c, 260c, 20 s - moisture sensitivity j-std-020c level 1 - resistance to corrosion : 1) salt spray test iec 60068-2-11.ka: 48 h 2) sulfur dioxide (so2) test iec 60068-2-42 kc: 96 h at 25 ppm so2, 25 c, 75 %rh 3) hydrogen sulfide (h2s) test iec 60068-2-43 kd: 96 h at 12 ppm h2s, 25 c, 75 %rh solderless compliant press-fit characteristics: press-fit characteristics measured acc. to iec 60352-5 - press-in force: 90 n max. (at min. hole dia.) / 65 n typ. - push-out force: 30 n min. (at max. hole dia.) / 50 n typ. - push-out 3rd cycle: 20 n min. (at max. hole dia.) pcb hole dimensions - 2.54 mm grid: finished hole ?: 1 + 0.09/-0.06 mm | drilled hole ?: 1.15 0.02 mm preci-dip sa rue saint-henri 11 p.p.box 834 ch-2800 delmont / switzerland phone +41 (0)32 421 04 00 fax +41 (0)32 421 04 01 e-mail sales@precidip.com www.precidip.com
pcb hole plating - pcb surface finish: hole plating - tin: 5-15 m tin over min. 25 m copper - copper: min. 25 m copper - gold over nickel: 0.05-0.2 m gold over 2.5-5 m nickel over min. 25 m copper preci-dip sa rue saint-henri 11 p.p.box 834 ch-2800 delmont / switzerland phone +41 (0)32 421 04 00 fax +41 (0)32 421 04 01 e-mail sales@precidip.com www.precidip.com
mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: preci-dip: ? 160-10-316-00-001101
|