smt power inductors - lpo3010 document 399-1 dcr srf inductance 2 max 3 typ 4 i sat 5 i rms 6 part number 1 (h) (ohms) (mhz) (a) (a) lpo3010-102nl_ 1.0 30% 0.140 200 1.7 1.4 lpo3010-122nl_ 1.2 30% 0.160 190 1.6 1.4 lpo3010-152nl_ 1.5 30% 0.200 150 1.3 1.0 lpo3010-222nl_ 2.2 30% 0.265 140 1.2 0.90 lpo3010-332nl_ 3.3 30% 0.335 100 0.96 0.60 lpo3010-472nl_ 4.7 30% 0.570 80 0.76 0.50 lpo3010-682nl_ 6.8 30% 0.650 68 0.68 0.47 lpo3010-822nl_ 8.2 30% 1.00 60 0.64 0.45 lpo3010-103ml_ 10 20% 1.15 50 0.50 0.45 lpo3010-153ml_ 15 20% 1.57 35 0.42 0.40 lpo3010-223ml_ 22 20% 2.20 30 0.37 0.35 lpo3010-333ml_ 33 20% 2.80 14 0.31 0.29 lpo3010-473ml_ 47 20% 4.60 12 0.30 0.28 1. when ordering, please specify termination and packaging codes: lpo3010-473m lc termination: l = rohs compliant silver-palladium-platinum-glass frit special order: t = rohs tin-silver-copper (95.5/4/0.5) or s = non-rohs tin-lead (63/37). packaging: c = 7 machine-ready reel. eia-481 embossed plastic tape (1000 parts per full reel). b = less than full reel. in tape, but not machine ready. to have a leader and trailer added ($25 charge), use code letter c instead. d = 13 machine-ready reel. eia-481 embossed plastic tape (3500 parts per full reel). 2. inductance tested at 100 khz, 0.1 vrms using an agilent/hp 4192a. 3. dcr measured on a micro-ohmmeter. 4. srf measured using an agilent/hp 8753es or equivalent. 5. dc current at which the inductance drops 10% (typ) from its value without current. 6. current that causes a 40c temperature rise from 25c ambient. 7. electrical specifcations at 25c. refer to doc 362 soldering surface mount components before soldering. designers kit c388 contains 3 of each part core material ferrite terminations rohs compliant silver-palladium-platinum-glass frit. other terminations available at additional cost. weight 20 C 22 mg ambient temperature C40c to +85c with i rms current, +85c to +125c with derated current storage temperature component: C40c to +125c. tape and reel packaging: C40c to +80c resistance to soldering heat max three 40 second refows at +260c, parts cooled to room temperature between cycles moisture sensitivity level (msl) 1 (unlimited foor life at <30c / 85% relative humidity) failures in time (fit) / mean time between failures (mtbf) 38 per billion hours / 26,315,789 hours, calculated per telcordia sr-332 packaging 1000/7 reel; 3500/13 reel plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.14 mm pocket depth recommended pick and place nozzle od: 3 mm; id: 1.5 mm pcb washing tested with pure water or alcohol only. for other solvents, see doc787_pcb_washing.pdf ? miniature power inductors C 3 3 mm, only 1.0 mm tall ? low dcr; excellent current handling document 399-1 revised 02/25/09 us uk t aiwan china singapore +1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-eur ope.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg ? coilcraft inc. 2013 this pr oduct may not be used in medical or high risk applications without prior coilcraft appr oval. specification subject to change without notice. please check web site for latest infor mation.
smt power inductors - lpo3010 series document 399-2 document 399-2 revised 02/25/09 typical l vs current 0.1 1 10 100 0.01 0.1 11 0 current (a) inductance (h) 1.0 h 4.7 h 22 h 47 h 2.2 h 10 h 0.118 0.008 3,0 0,2 0.130 3,30 0.040 1,02 0.025 0,64 0.045 1,16 0.020 0,51 0.130 3,30 0.118 0.008 3,0 0,2 0.039 0.004 1,0 0,1 recommended land p attern 0.035 0,89 winding direction dash n umber inter nal code 123x -40 -2 00 20 40 60 80 100 140 120 a mbient t emperatur e (c) pe r cent of r ated c urrent 120 110 100 90 80 70 60 50 40 30 20 10 0 i sat i rm s 25 c current derating typical esr vs frequency 0.01 0.1 100 10 1 0.1 1 10 100 1000 equiv alent series resistance ( ) frequenc y (mhz ) 1 h 2.2 h 4.7 h 10 h 22 h 47 h typical l vs frequency 0.1 1 10 100 0.01 0.1 10 1 inductance (h) frequency (mhz) 1 h 2.2 h 22 h 47 h 10 h 4.7 h dimensions are in inches mm us uk t aiwan china singapore +1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-eur ope.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg ? coilcraft inc. 2013 this pr oduct may not be used in medical or high risk applications without prior coilcraft appr oval. specification subject to change without notice. please check web site for latest infor mation.
|
