technical data sheet adaptor smp jack C sma jack 19K132-K00D3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de email: info@rosenberger.de 1 / 2 rf_35/12.04/3.0 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg all dimensions are in mm; tolerances acc. iso 2768 m-h interface according to smp side: mil-std-348 sma side: iec 60169-15; en 122110; mil-std-348 documents n/a material and plating connector parts material plating center contact beryllium copper gold, min. 0.8 m, over chemical nickel outer contact smp side beryllium copper gold, min. 1.27 m, over chemical nickel outer contact sma side stainless steel passivated dielectric ptfe
technical data sheet adaptor smp jack C sma jack 19K132-K00D3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/12.04/3.0 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg f(ghz) electrical data impedance 50 w frequency dc to 26.5 ghz return loss 3 35 db, dc to 4 ghz 3 26 db, 4 to 10 ghz 3 18 db, 10 to 18 ghz insertion loss 0.05 x db insulation resistance 3 5 g w center contact resistance 6.0 m w , smp side; 3 m w , sma side outer contact resistance 2.0 m w , smp side; 2 m w , sma side test voltage 500 v rms working voltage 335 v rms contact current 1.2a dc max. mechanical data smp side sma side mating cycles min. 500 if mating part is smooth bore 3 1000 if mating part is limited detent 3 500 if mating part is full detent 3 100 center contact captivation: axial 3 27 n 3 27 n engagement force n/a - smooth bore 9 n max. - limited detent 45 n max. - full detent 68 n max. disengagement force n/a - smooth bore 2.2 n min. - limited detent 9 n min. - full detent 22 n min. coupling test torque n/a max. 1.7 nm recommended torque n/a 0.8 nm to 1.1 nm environmental data temperature range -65c to +155c thermal shock mil-std-202, method 107, condition b vibration mil-std-202, method 204, condition b shock mil-std-202, method 213, condition a moisture resistance mil-std-202, method 106 rohs compliant tooling n/a suitable cables n/a weight weight 4.6 g/pce draft date approved date rev. engineering change n umber name date inge mhlauer 17/08/04 j_krautenbacher 14.07.16 e0 0 15-1629 i_wallner 14.07.16 while the information has been carefully compiled to the best of our knowledge, nothing is i ntended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. in the effort to improve our products, we reserve the right to make changes judg ed to be necessary.
|
