technical data sheet rpc-1.85 smd connector jack 08K80A-40ML5 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 fax : +49 8684 18-499 email : info@rosenberger.de page 1 / 2 rf_35/05.10/6.0 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg all dimensions are in mm; tolerances according to i so 2768 m-h interface according to iec 61169-32 mechanically compatible with rpc-2.40 documents pcb layout mb 389
technical data sheet rpc-1.85 smd connector jack 08K80A-40ML5 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 fax : +49 8684 18-499 email : info@rosenberger.de page 2 / 2 rf_35/05.10/6.0 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg f(ghz) material and plating connector parts material plating center contact cube aurodur?, gold plated outer contact pcb side cube or equiv. aurodur?, gol d plated outer contact rpc-1.85 side cube or equiv. aurodur? , gold plated dielectric peek electrical data impedance 50 w frequency dc to 70 ghz return loss 3 21 db, dc to 26.5 ghz 3 19 db, 26.5 ghz to 40 ghz 3 17 db, 40 ghz to 70 ghz insertion loss 0.05 x db insulation resistance 3 5 g w test voltage 500 v rms working voltage 150 v rms - return loss in application depends decisive on pc b layout - mechanical data mating cycles pcb side 3 300 mating cycles rpc-1.85 side 3 500 center contact captivation 3 10 n coupling test torque rpc-1.85 1.65 nm recommended torque rpc-1.85 0.80 nm to 1.10 nm recommended torque allen screw 1.5 0.20 nm to 0.30 nm pcb thickness max.1 1.5 mm typical; dimension expan dable with longer screws environmental data temperature range -40c to +85c thermal shock iec 61169-1, subclause 9.4.4 corrosion iec 61169-1, subclause 9.4.6 vibration iec 61169-1, subclause 9.3.3 shock iec 61169-1, subclause 9.3.14 moisture resistance iec 61169-1, subclause 9.4.3 max. soldering temperature n/a (connector is only s crewed on, not soldered) rohs compliant tooling allen wrench 1.5 mm packing standard 1 pce in box 50 pcs in blister weight 6.3 g/pce draft date approved date rev. engineering change n umber name date herbert babinger 04/05/11 herbert babinger 28/01/16 f00 16-0142 b.zimmerle 2 8/01/16 while the information has been carefully compiled t o the best of our knowledge, nothing is intended as r epresentation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. in the effort to improve our products, we reserve the right to make changes judg ed to be necessary. while the information has been carefully compiled t o the best of our knowledge, nothing is intended as representation or warr anty on our part and no statem ent herein shall be construed as recommendation to infringe existing patents. in the effort to improve our products, we reserve the right to make changes judg ed to be necessary.
|
