View TNC-R-NICAU-CF_8846066.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

tnc series tnc style connector 150424 frequency range dc to 2ghz 50 lock type characteristic impedance screw feature characteristic impedance 50 rated voltage 500vac(r.m.s.) dielectric withstanding voltage 500v ac(r.m.s) / 1 minute insulation resistance 1,000m min. at 500v dc contact resistance 3m max. v.s.w.r. 1.3 max. (dc ? 2ghz) operating temperature -55 ? +85 rohs compliant rohs compliant tem aterial ini sell copper lloy ni or latin contact emale copper lloy or latin contact ale copper lloy or latin nlator t aet silicon rer specifications material/finish the specifications are typical but may not apply to all connectors. please check the specifcations on each item with its drawing from us when you use. ? tnc series is a thread coupling coaxial connector which is modifed bnc style connector. ? due to the thread coupling, it is superior to bnc style connector in vibration load. ? other electrical and mechanical characteristics are same as bnc style connector. ? recommended toque of coupling is 45 ? 68.6n?cm. conforming standard mil-prf-39012 http://www.ddknet.co.jp please acknowledge that the specifcation etc. of this catalog might change by the improvement etc. without notice. moreover, the characteristic and the specifcation of the published product are the reference values. please confrm the content with the latest delivery specifcations when you use the product.
2 straight cable plug clamp type part number applicable cable l finish assembly instruction outer conductor center conductor tnc-p-3-cf 3d-2v 25.0 ag ag 6 3d-qev part number applicable cable a l finish assembly instruction crimp tool outer conductor center conductor tnc-p-1.5dqew-cf 1.5d-2w 5.5 22.3 ni au 1 cr-h-1100 1.5d-qew tnc-p-2.5d2w-cr10-cf 2.5d-2w 6.3 24.3 ni ag 2 cr-h-1115 2.5d-qew tnc-p-3d2w-cr10-cf 3d-2w 7.9 24.3 ni ag 2 cr-h-1135 3d-qew crimp type part number applicable cable a l finish assembly instruction crimp tool outer conductor center conductor tnc-p-2dfb-1-cf 2d-fb 6.2 29.7 ni au 3 cr-h-1105 l l a tnc-p-2dfb-1 l a tnc-j-1.5dxw-cr10-120 l a b l 17.0 b a 5.0 tnc-j-3d2w-cr10 tnc-bj-2.5dqew panel mounting dimensions b a l 13 10.2 16.8 2 (detent diameter (flat diameter 10.4 +0.1 0 11.2 +0.1 0 tnc-pj-1.5dxw-cr10-m tnc-pj-1.5dqew-cr10 26.8 5.5 15.8 2.3 17.5 12.7 12.7 4-3.0 12.7 4-3.0 12.0 30.8 15.8 2.3 5.5 18.2 0.05 18.2 0.05 12.7 25.4 18.2 18.2 4-m2.50.45 12.0 tnc-pj-2h-1.5d-cr10 23.4 18.0 24.4 14.7 2.3 4 18.0 12 6.0 2-3.2 2-3.2 4-3.0 +0.1 0 +0.1 0 l l a tnc-p-2dfb-1 l a tnc-j-1.5dxw-cr10-120 l a b l 17.0 b a 5.0 tnc-j-3d2w-cr10 tnc-bj-2.5dqew panel mounting dimensions b a l 13 10.2 16.8 2 (detent diameter (flat diameter 10.4 +0.1 0 11.2 +0.1 0 tnc-pj-1.5dxw-cr10-m tnc-pj-1.5dqew-cr10 26.8 5.5 15.8 2.3 17.5 12.7 12.7 4-3.0 12.7 4-3.0 12.0 30.8 15.8 2.3 5.5 18.2 0.05 18.2 0.05 12.7 25.4 18.2 18.2 4-m2.50.45 12.0 tnc-pj-2h-1.5d-cr10 23.4 18.0 24.4 14.7 2.3 4 18.0 12 6.0 2-3.2 2-3.2 4-3.0 +0.1 0 +0.1 0 l l a tnc-p-2dfb-1 tnc--1d-c1-12 b 1 b tnc--d2-c1 tnc-b-2d pd b 1 12 1 2 dd fd 1 1 112 1 tnc-p-1d-c1- tnc-p-1d-c1 2 1 2 1 12 12 - 12 - 12 1 2 12 12 12 2 12 12 -2 12 tnc-p-2-1d-c1 2 1 2 1 2 1 12 2-2 2-2 - 1 1 unitmm http://www.ddknet.co.jp tncseries please acknowledge that the specifcation etc. of this catalog might change by the improvement etc. without notice. moreover, the characteristic and the specifcation of the published product are the reference values. please confrm the content with the latest delivery specifcations when you use the product.
straight cable jack 3 part number applicable cable a b l finish assembly instruction crimp tool outer conductor center conductor tnc-bj-2.5d-qew-cf 2.5d-2w 14.0 6.25 27.9 ni ag 4 cr-h-1105 2.5d-qew l l a tnc-p-2dfb-1 l a tnc-j-1.5dxw-cr10-120 l a b l 17.0 b a 5.0 tnc-j-3d2w-cr10 tnc-bj-2.5dqew panel mounting dimensions b a l 13 10.2 16.8 2 (detent diameter (flat diameter 10.4 +0.1 0 11.2 +0.1 0 tnc-pj-1.5dxw-cr10-m tnc-pj-1.5dqew-cr10 26.8 5.5 15.8 2.3 17.5 12.7 12.7 4-3.0 12.7 4-3.0 12.0 30.8 15.8 2.3 5.5 18.2 0.05 18.2 0.05 12.7 25.4 18.2 18.2 4-m2.50.45 12.0 tnc-pj-2h-1.5d-cr10 23.4 18.0 24.4 14.7 2.3 4 18.0 12 6.0 2-3.2 2-3.2 4-3.0 +0.1 0 +0.1 0 l l a tnc-p-2dfb-1 l a tnc-j-1.5dxw-cr10-120 l a b l 17.0 b a 5.0 tnc-j-3d2w-cr10 tnc-bj-2.5dqew panel mounting dimensions b a l 13 10.2 16.8 2 (detent diameter (flat diameter 10.4 +0.1 0 11.2 +0.1 0 tnc-pj-1.5dxw-cr10-m tnc-pj-1.5dqew-cr10 26.8 5.5 15.8 2.3 17.5 12.7 12.7 4-3.0 12.7 4-3.0 12.0 30.8 15.8 2.3 5.5 18.2 0.05 18.2 0.05 12.7 25.4 18.2 18.2 4-m2.50.45 12.0 tnc-pj-2h-1.5d-cr10 23.4 18.0 24.4 14.7 2.3 4 18.0 12 6.0 2-3.2 2-3.2 4-3.0 +0.1 0 +0.1 0 mounting panel thickness2.7mm max. part number applicable cable a b l finish assembly instruction crimp tool outer conductor center conductor tnc-j-1.5dxw-cr10-120-cf 2d-fb 5.5 12.0 26.8 ni ag 4 cr-h-1142 tnc-j-2.5d2w-cr10-cf 2.5d-2w 6.25 14.6 25.0 ni ag 4 cr-h-1105 2.5d-qew crimp type l l a tnc-p-2dfb-1 l a tnc-j-1.5dxw-cr10-120 l a b l 17.0 b a 5.0 tnc-j-3d2w-cr10 tnc-bj-2.5dqew panel mounting dimensions b a l 13 10.2 16.8 2 (detent diameter (flat diameter 10.4 +0.1 0 11.2 +0.1 0 tnc-pj-1.5dxw-cr10-m tnc-pj-1.5dqew-cr10 26.8 5.5 15.8 2.3 17.5 12.7 12.7 4-3.0 12.7 4-3.0 12.0 30.8 15.8 2.3 5.5 18.2 0.05 18.2 0.05 12.7 25.4 18.2 18.2 4-m2.50.45 12.0 tnc-pj-2h-1.5d-cr10 23.4 18.0 24.4 14.7 2.3 4 18.0 12 6.0 2-3.2 2-3.2 4-3.0 +0.1 0 +0.1 0 l l a tnc-p-2dfb-1 l a tnc-j-1.5dxw-cr10-120 l a b l 17.0 b a 5.0 tnc-j-3d2w-cr10 tnc-bj-2.5dqew panel mounting dimensions b a l 13 10.2 16.8 2 (detent diameter (flat diameter 10.4 +0.1 0 11.2 +0.1 0 tnc-pj-1.5dxw-cr10-m tnc-pj-1.5dqew-cr10 26.8 5.5 15.8 2.3 17.5 12.7 12.7 4-3.0 12.7 4-3.0 12.0 30.8 15.8 2.3 5.5 18.2 0.05 18.2 0.05 12.7 25.4 18.2 18.2 4-m2.50.45 12.0 tnc-pj-2h-1.5d-cr10 23.4 18.0 24.4 14.7 2.3 4 18.0 12 6.0 2-3.2 2-3.2 4-3.0 +0.1 0 +0.1 0 part number applicable cable a b l finish assembly instruction crimp tool outer conductor center conductor tnc-j-3d2w-cr10-cf 3d-2w 7.9 14.6 25.42 ni ag 4 cr-h-1135 3d-qew straight bulkhead cable jack 6ojunn iuuqxxxeelofudpkq 5/$y4fsjft ? 1mfbtfbdlopxmfehfuibuuiftqfdjpdbujpofudpguijtdbubmphnjhiudibohfczuifjnqspwfnfoufudxjuipvuopujdf y.psfpwfs uifdibsbdufsjtujdboeuiftqfdjpdbujpopguifqvcmjtifeqspevdubsfuifsfgfsfodfwbmvft y1mfbtfdpopsnuifdpoufouxjuiuifmbuftuefmjwfsztqfdjpdbujpotxifozpvvtfuifqspevdu
4 part number applicable cable finish assembly instruction crimp tool outer conductor center conductor tnc-pj-1.5dqew-cr10-cf 1.5d-qew ni ag 5 cr-h-1142 1.5d-2w l l a tnc-p-2dfb-1 l a tnc-j-1.5dxw-cr10-120 l a b l 17.0 b a 5.0 tnc-j-3d2w-cr10 tnc-bj-2.5dqew panel mounting dimensions b a l 13 10.2 16.8 2 (detent diameter (flat diameter 10.4 +0.1 0 11.2 +0.1 0 tnc-pj-1.5dxw-cr10-m tnc-pj-1.5dqew-cr10 26.8 5.5 15.8 2.3 17.5 12.7 12.7 4-3.0 12.7 4-3.0 12.0 30.8 15.8 2.3 5.5 18.2 0.05 18.2 0.05 12.7 25.4 18.2 18.2 4-m2.50.45 12.0 tnc-pj-2h-1.5d-cr10 23.4 18.0 24.4 14.7 2.3 4 18.0 12 6.0 2-3.2 2-3.2 4-3.0 +0.1 0 +0.1 0 l l a tnc-p-2dfb-1 l a tnc-j-1.5dxw-cr10-120 l a b l 17.0 b a 5.0 tnc-j-3d2w-cr10 tnc-bj-2.5dqew panel mounting dimensions b a l 13 10.2 16.8 2 (detent diameter (flat diameter 10.4 +0.1 0 11.2 +0.1 0 tnc-pj-1.5dxw-cr10-m tnc-pj-1.5dqew-cr10 26.8 5.5 15.8 2.3 17.5 12.7 12.7 4-3.0 12.7 4-3.0 12.0 30.8 15.8 2.3 5.5 18.2 0.05 18.2 0.05 12.7 25.4 18.2 18.2 4-m2.50.45 12.0 tnc-pj-2h-1.5d-cr10 23.4 18.0 24.4 14.7 2.3 4 18.0 12 6.0 2-3.2 2-3.2 4-3.0 +0.1 0 +0.1 0 part number applicable cable finish assembly instruction crimp tool outer conductor center conductor tnc-pj-1.5dxw-cr10-m-cf 1.5d-xw ni ag 7 cr-h-1100 1.5d-xwta l l a tnc-p-2dfb-1 l a tnc-j-1.5dxw-cr10-120 l a b l 17.0 b a 5.0 tnc-j-3d2w-cr10 tnc-bj-2.5dqew panel mounting dimensions b a l 13 10.2 16.8 2 (detent diameter (flat diameter 10.4 +0.1 0 11.2 +0.1 0 tnc-pj-1.5dxw-cr10-m tnc-pj-1.5dqew-cr10 26.8 5.5 15.8 2.3 17.5 12.7 12.7 4-3.0 12.7 4-3.0 12.0 30.8 15.8 2.3 5.5 18.2 0.05 18.2 0.05 12.7 25.4 18.2 18.2 4-m2.50.45 12.0 tnc-pj-2h-1.5d-cr10 23.4 18.0 24.4 14.7 2.3 4 18.0 12 6.0 2-3.2 2-3.2 4-3.0 +0.1 0 +0.1 0 l l a tnc-p-2dfb-1 l a tnc-j-1.5dxw-cr10-120 l a b l 17.0 b a 5.0 tnc-j-3d2w-cr10 tnc-bj-2.5dqew panel mounting dimensions b a l 13 10.2 16.8 2 (detent diameter (flat diameter 10.4 +0.1 0 11.2 +0.1 0 tnc-pj-1.5dxw-cr10-m tnc-pj-1.5dqew-cr10 26.8 5.5 15.8 2.3 17.5 12.7 12.7 4-3.0 12.7 4-3.0 12.0 30.8 15.8 2.3 5.5 18.2 0.05 18.2 0.05 12.7 25.4 18.2 18.2 4-m2.50.45 12.0 tnc-pj-2h-1.5d-cr10 23.4 18.0 24.4 14.7 2.3 4 18.0 12 6.0 2-3.2 2-3.2 4-3.0 +0.1 0 +0.1 0 panel mounting dimensions crimp type part number applicable cable finish assembly instruction crimp tool outer conductor center conductor tnc-pj-2h-1.5d-cr10-cf 1.5d-qev ni ag 5 cr-h-1101 1.5d-2v l l a tnc-p-2dfb-1 l a tnc-j-1.5dxw-cr10-120 l a b l 17.0 b a 5.0 tnc-j-3d2w-cr10 tnc-bj-2.5dqew panel mounting dimensions b a l 13 10.2 16.8 2 (detent diameter (flat diameter 10.4 +0.1 0 11.2 +0.1 0 tnc-pj-1.5dxw-cr10-m tnc-pj-1.5dqew-cr10 26.8 5.5 15.8 2.3 17.5 12.7 12.7 4-3.0 12.7 4-3.0 12.0 30.8 15.8 2.3 5.5 18.2 0.05 18.2 0.05 12.7 25.4 18.2 18.2 4-m2.50.45 12.0 tnc-pj-2h-1.5d-cr10 23.4 18.0 24.4 14.7 2.3 4 18.0 12 6.0 2-3.2 2-3.2 4-3.0 +0.1 0 +0.1 0 l l a tnc-p-2dfb-1 l a tnc-j-1.5dxw-cr10-120 l a b l 17.0 b a 5.0 tnc-j-3d2w-cr10 tnc-bj-2.5dqew panel mounting dimensions b a l 13 10.2 16.8 2 (detent diameter (flat diameter 10.4 +0.1 0 11.2 +0.1 0 tnc-pj-1.5dxw-cr10-m tnc-pj-1.5dqew-cr10 26.8 5.5 15.8 2.3 17.5 12.7 12.7 4-3.0 12.7 4-3.0 12.0 30.8 15.8 2.3 5.5 18.2 0.05 18.2 0.05 12.7 25.4 18.2 18.2 4-m2.50.45 12.0 tnc-pj-2h-1.5d-cr10 23.4 18.0 24.4 14.7 2.3 4 18.0 12 6.0 2-3.2 2-3.2 4-3.0 +0.1 0 +0.1 0 traigt panel cale ja panel mounting dimensions panel mounting dimensions unitmm http://www.ddknet.co.jp tncseries please acknowledge that the specifcation etc. of this catalog might change by the improvement etc. without notice. moreover, the characteristic and the specifcation of the published product are the reference values. please confrm the content with the latest delivery specifcations when you use the product.
part number finish outer conductor center conductor tnc-r-cf ag au TNC-R-NICAU-CF ni au tnc-r tnc-r-niau tnc-r2-ni tnc-r2 tnc-r2-2h-ni tnc-sr-3 tnc-sr-6 tnc-sr-9 23.3 26.3 15.8 2.3 1.4 12.7 0.05 12.7 17.5 12.7 4-m2.60.45 12.7 0.05 11.1 +0.2 0 4-2.8 0.15 17.5 12.7 26.3 15.8 2.3 1.4 12.7 12.7 0.05 12.7 0.05 11.1 +0.2 0 4-3.0 +0.1 0 4-3.0 26.3 15.8 2.3 11 18 0.05 18 1.4 2-3.0 2-3 +0.1 0 9.0 +0.1 0 27.7 15.8 9.6 1.7 5.4 4 2.3 17.5 12.7 17.5 12.7 12.7 4-3.0 12.7 0.05 12.7 0.05 12 +0.1 0 4-3.0 +0.1 0 12.7 0.05 12.7 0.05 4.1 +0.1 0 4-3.1 +0.1 0 12.7 4.0 17.8 6.8 26.6 1.27 0 -0.1 2 2 2 17.8 8.5 2 26.6 4.0 1.27 0 -0.1 4-3.0 (thru-hole 17.5 12.7 12.7 4-3.0 (thru-hole 12.7 0.05 12.7 0.05 4.1 +0.1 0 4-3.1 +0.1 0 part number finish outer conductor center conductor tnc-r2-cf ag ag tnc-r2-ni-cf ni ag tnc-r2-nicau-cf ni au tnc-r tnc-r-niau tnc-r2-ni tnc-r2 tnc-r2-2h-ni tnc-sr-3 tnc-sr-6 tnc-sr-9 23.3 26.3 15.8 2.3 1.4 12.7 0.05 12.7 17.5 12.7 4-m2.60.45 12.7 0.05 11.1 +0.2 0 4-2.8 0.15 17.5 12.7 26.3 15.8 2.3 1.4 12.7 12.7 0.05 12.7 0.05 11.1 +0.2 0 4-3.0 +0.1 0 4-3.0 26.3 15.8 2.3 11 18 0.05 18 1.4 2-3.0 2-3 +0.1 0 9.0 +0.1 0 27.7 15.8 9.6 1.7 5.4 4 2.3 17.5 12.7 17.5 12.7 12.7 4-3.0 12.7 0.05 12.7 0.05 12 +0.1 0 4-3.0 +0.1 0 12.7 0.05 12.7 0.05 4.1 +0.1 0 4-3.1 +0.1 0 12.7 4.0 17.8 6.8 26.6 1.27 0 -0.1 2 2 2 17.8 8.5 2 26.6 4.0 1.27 0 -0.1 4-3.0 (thru-hole 17.5 12.7 12.7 4-3.0 (thru-hole 12.7 0.05 12.7 0.05 4.1 +0.1 0 4-3.1 +0.1 0 part number finish outer conductor center conductor tnc-r2-2h-ni-cf ni ag tnc-r tnc-r-niau tnc-r2-ni tnc-r2 tnc-r2-2h-ni tnc-sr-3 tnc-sr-6 tnc-sr-9 23.3 26.3 15.8 2.3 1.4 12.7 0.05 12.7 17.5 12.7 4-m2.60.45 12.7 0.05 11.1 +0.2 0 4-2.8 0.15 17.5 12.7 26.3 15.8 2.3 1.4 12.7 12.7 0.05 12.7 0.05 11.1 +0.2 0 4-3.0 +0.1 0 4-3.0 26.3 15.8 2.3 11 18 0.05 18 1.4 2-3.0 2-3 +0.1 0 9.0 +0.1 0 27.7 15.8 9.6 1.7 5.4 4 2.3 17.5 12.7 17.5 12.7 12.7 4-3.0 12.7 0.05 12.7 0.05 12 +0.1 0 4-3.0 +0.1 0 12.7 0.05 12.7 0.05 4.1 +0.1 0 4-3.1 +0.1 0 12.7 4.0 17.8 6.8 26.6 1.27 0 -0.1 2 2 2 17.8 8.5 2 26.6 4.0 1.27 0 -0.1 4-3.0 (thru-hole 17.5 12.7 12.7 4-3.0 (thru-hole 12.7 0.05 12.7 0.05 4.1 +0.1 0 4-3.1 +0.1 0 5 receptacle jack panel mounting dimensions panel mounting dimensions panel mounting dimensions 6ojunn iuuqxxxeelofudpkq 5/$y4fsjft ? 1mfbtfbdlopxmfehfuibuuiftqfdjpdbujpofudpguijtdbubmphnjhiudibohfczuifjnqspwfnfoufudxjuipvuopujdf y.psfpwfs uifdibsbdufsjtujdboeuiftqfdjpdbujpopguifqvcmjtifeqspevdubsfuifsfgfsfodfwbmvft y1mfbtfdpopsnuifdpoufouxjuiuifmbuftuefmjwfsztqfdjpdbujpotxifozpvvtfuifqspevdu
receptacle jack part number finish outer conductor center conductor tnc-sr-3-cf ni au part number finish outer conductor center conductor tnc-sr-6-cf ni au part number finish outer conductor center conductor tnc-sr-9-cf ni au tnc-r tnc-r-niau tnc-r2-ni tnc-r2 tnc-r2-2h-ni tnc-sr-3 tnc-sr-6 tnc-sr-9 23.3 26.3 15.8 2.3 1.4 12.7 0.05 12.7 17.5 12.7 4-m2.60.45 12.7 0.05 11.1 +0.2 0 4-2.8 0.15 17.5 12.7 26.3 15.8 2.3 1.4 12.7 12.7 0.05 12.7 0.05 11.1 +0.2 0 4-3.0 +0.1 0 4-3.0 26.3 15.8 2.3 11 18 0.05 18 1.4 2-3.0 2-3 +0.1 0 9.0 +0.1 0 27.7 15.8 9.6 1.7 5.4 4 2.3 17.5 12.7 17.5 12.7 12.7 4-3.0 12.7 0.05 12.7 0.05 12 +0.1 0 4-3.0 +0.1 0 12.7 0.05 12.7 0.05 4.1 +0.1 0 4-3.1 +0.1 0 12.7 4.0 17.8 6.8 26.6 1.27 0 -0.1 2 2 2 17.8 8.5 2 26.6 4.0 1.27 0 -0.1 4-3.0 (thru-hole 17.5 12.7 12.7 4-3.0 (thru-hole 12.7 0.05 12.7 0.05 4.1 +0.1 0 4-3.1 +0.1 0 tnc-r tnc-r-niau tnc-r2-ni tnc-r2 tnc-r2-2h-ni tnc-sr-3 tnc-sr-6 tnc-sr-9 23.3 26.3 15.8 2.3 1.4 12.7 0.05 12.7 17.5 12.7 4-m2.60.45 12.7 0.05 11.1 +0.2 0 4-2.8 0.15 17.5 12.7 26.3 15.8 2.3 1.4 12.7 12.7 0.05 12.7 0.05 11.1 +0.2 0 4-3.0 +0.1 0 4-3.0 26.3 15.8 2.3 11 18 0.05 18 1.4 2-3.0 2-3 +0.1 0 9.0 +0.1 0 27.7 15.8 9.6 1.7 5.4 4 2.3 17.5 12.7 17.5 12.7 12.7 4-3.0 12.7 0.05 12.7 0.05 12 +0.1 0 4-3.0 +0.1 0 12.7 0.05 12.7 0.05 4.1 +0.1 0 4-3.1 +0.1 0 12.7 4.0 17.8 6.8 26.6 1.27 0 -0.1 2 2 2 17.8 8.5 2 26.6 4.0 1.27 0 -0.1 4-3.0 (thru-hole 17.5 12.7 12.7 4-3.0 (thru-hole 12.7 0.05 12.7 0.05 4.1 +0.1 0 4-3.1 +0.1 0 tnc-r tnc-r-niau tnc-r2-ni tnc-r2 tnc-r2-2h-ni tnc-sr-3 tnc-sr-6 tnc-sr-9 23.3 26.3 15.8 2.3 1.4 12.7 0.05 12.7 17.5 12.7 4-m2.60.45 12.7 0.05 11.1 +0.2 0 4-2.8 0.15 17.5 12.7 26.3 15.8 2.3 1.4 12.7 12.7 0.05 12.7 0.05 11.1 +0.2 0 4-3.0 +0.1 0 4-3.0 26.3 15.8 2.3 11 18 0.05 18 1.4 2-3.0 2-3 +0.1 0 9.0 +0.1 0 27.7 15.8 9.6 1.7 5.4 4 2.3 17.5 12.7 17.5 12.7 12.7 4-3.0 12.7 0.05 12.7 0.05 12 +0.1 0 4-3.0 +0.1 0 12.7 0.05 12.7 0.05 4.1 +0.1 0 4-3.1 +0.1 0 12.7 4.0 17.8 6.8 26.6 1.27 0 -0.1 2 2 2 17.8 8.5 2 26.6 4.0 1.27 0 -0.1 4-3.0 (thru-hole 17.5 12.7 12.7 4-3.0 (thru-hole 12.7 0.05 12.7 0.05 4.1 +0.1 0 4-3.1 +0.1 0 6 panel mounting dimensions panel mounting dimensions panel mounting dimensions unitmm http://www.ddknet.co.jp tncseries please acknowledge that the specifcation etc. of this catalog might change by the improvement etc. without notice. moreover, the characteristic and the specifcation of the published product are the reference values. please confrm the content with the latest delivery specifcations when you use the product.
receptacle plug right angle receptacle jack part number finish outer conductor center conductor tnc-pr-cf ag ag part number finish outer conductor center conductor tnc-lr-cf ag au tnc-lr-ni-cf ni ag part number finish outer conductor center conductor tnc-lr-1-cf ag ag tnc-pr tnc-lr-ni tnc-lr tnc-lr-1 28.5 18.0 12.7 0.05 12.7 0.05 4-3.2 +0.1 0 9.0 +0.1 0 17.5 12.7 1.1 2.29 4-3.0 12.7 2.3 14.6 12.7 0.05 12.7 0.05 4-3 +0.1 0 9.0 +0.1 0 23 12.7 14.3 2.3 23 17.5 12.7 17.5 12.7 12.7 4-3.0 4-m2.6 1.1 2.29 1.1 2.29 21.6 23.1 14.3 2.3 5 tnc-pr tnc-lr-ni tnc-lr tnc-lr-1 28.5 18.0 12.7 0.05 12.7 0.05 4-3.2 +0.1 0 9.0 +0.1 0 17.5 12.7 1.1 2.29 4-3.0 12.7 2.3 14.6 12.7 0.05 12.7 0.05 4-3 +0.1 0 9.0 +0.1 0 23 12.7 14.3 2.3 23 17.5 12.7 17.5 12.7 12.7 4-3.0 4-m2.6 1.1 2.29 1.1 2.29 21.6 23.1 14.3 2.3 5 tnc-pr tnc-lr-ni tnc-lr tnc-lr-1 28.5 18.0 12.7 0.05 12.7 0.05 4-3.2 +0.1 0 9.0 +0.1 0 17.5 12.7 1.1 2.29 4-3.0 12.7 2.3 14.6 12.7 0.05 12.7 0.05 4-3 +0.1 0 9.0 +0.1 0 23 12.7 14.3 2.3 23 17.5 12.7 17.5 12.7 12.7 4-3.0 4-m2.6 1.1 2.29 1.1 2.29 21.6 23.1 14.3 2.3 5 7 panel mounting dimensions panel mounting dimensions 6ojunn iuuqxxxeelofudpkq 5/$y4fsjft ? 1mfbtfbdlopxmfehfuibuuiftqfdjpdbujpofudpguijtdbubmphnjhiudibohfczuifjnqspwfnfoufudxjuipvuopujdf y.psfpwfs uifdibsbdufsjtujdboeuiftqfdjpdbujpopguifqvcmjtifeqspevdubsfuifsfgfsfodfwbmvft y1mfbtfdpopsnuifdpoufouxjuiuifmbuftuefmjwfsztqfdjpdbujpotxifozpvvtfuifqspevdu
dust cap tnc-rc-1-d1 26357-001 1 1 ?? ?~ y ? 1 2 ? ??? 1 3 ? ?~ ?? ? 1 4 ?`` ?~ 1 5 ?? ?~ (60) (75) 3.5 `? `? 716-28n-2 m??tnc? ?1???``????? ??``????A58.8n6kgf? ????????h] 2??????9.839.2n?cm14kgf?cm 14.5 tnc-c-2-d1-cf 26321-001-cf | 1 1 1 2 3 ? ? ?? ~? ?? ? ? ? m??? ?????????? 15 ( 14.5) 7/16-28unef-2b 1 y ? ~? n f tnc-c-2-cf n tnc-c-2-d1-cf n f tnc-c-1 n tnc-c-1-d1 unitmm http://www.ddknet.co.jp tncseries please acknowledge that the specifcation etc. of this catalog might change by the improvement etc. without notice. moreover, the characteristic and the specifcation of the published product are the reference values. please confrm the content with the latest delivery specifcations when you use the product.
assembly instruction1 insert the heat-shrinkable tube onto the cable. cut the cable as fg.1. please be careful to not damage the outer conductor. insert the ferule on the outer conductor and spread the top of the outer conductor. insert the sleeve between insulator and outer conductor. and cut the outer conductor along the sleeve. cut the insulator as fg. 3. please be careful to not damage the center conductor. pre-solder the center conductor and cut the center conductor. please be careful to not damage the insulator by soldering. insert the insulator as fg.3. solder up the contact with center conductor. no gap between insulator and contact. insert the body into the above cable assembly. and crimp the root of the body. please be careful to meet the crimp height as follows. cover the heat-shrinkable tube on the root of the body and heat up. 9 parts confgulration notedistance between body and contact must be met. l cable length heat-shrinkable tube ferule sleeve insulator contact body l 1 14.7 0.5 outer conductor heat-shrinkable tube sheath insulator ferule sleeve center conductor insulator no gap contact soldering measuring point (3.1) heat-shrinkable tube dies 6.2 0 -0.5 4 +0.2 -0.3 insulator outer conductor 5.335.84 (between body and contact) l2 (pre-soldering) a b c notedistance between body and contact must be met. l cable length heat-shrinkable tube ferule sleeve insulator contact body l 1 14.7 0.5 outer conductor heat-shrinkable tube sheath insulator ferule sleeve center conductor insulator no gap contact soldering measuring point (3.1) heat-shrinkable tube dies 6.2 0 -0.5 4 +0.2 -0.3 insulator outer conductor 5.335.84 (between body and contact) l2 (pre-soldering) a b c notedistance between body and contact must be met. l cable length heat-shrinkable tube ferule sleeve insulator contact body l 1 1 outer conductor eatrnabe tube eat nuator erue eee center conductor nuator o a contact odern eaurn ont (1) eatrnabe tube e nuator outer conductor 5.335.84 (between body and contact) (reodern) c otetance between body and contact ut be et cabe ent eatrnabe tube erue eee nuator contact ody 1 14.7 0.5 outer conductor heat-shrinkable tube sheath insulator ferule sleeve center conductor insulator no gap contact soldering measuring point (3.1) heat-shrinkable tube dies 6.2 0 -0.5 4 +0.2 -0.3 insulator outer conductor 5.335.84 (between body and contact) l2 (pre-soldering) a b c notedistance between body and contact must be met. l cable length heat-shrinkable tube ferule sleeve insulator contact body l 1 14.7 0.5 outer conductor heat-shrinkable tube sheath insulator ferule sleeve center conductor insulator no gap contact soldering measuring point (3.1) heat-shrinkable tube dies 6.2 0 -0.5 4 +0.2 -0.3 insulator outer conductor 5.335.84 (between body and contact) l2 (pre-soldering) a b c notedistance between body and contact must be met. l cable length heat-shrinkable tube ferule sleeve insulator contact body l 1 14.7 0.5 outer conductor heat-shrinkable tube sheath insulator ferule sleeve center conductor insulator no gap contact soldering measuring point (3.1) heat-shrinkable tube dies 6.2 0 -0.5 4 +0.2 -0.3 insulator outer conductor 5.335.84 (between body and contact) (reodern) c otetance between body and contact ut be et cabe ent eatrnabe tube erue eee nuator contact ody 1 14.7 0.5 outer conductor heat-shrinkable tube sheath insulator ferule sleeve center conductor insulator no gap contact soldering measuring point (3.1) heat-shrinkable tube dies 6.2 0 -0.5 4 +0.2 -0.3 insulator outer conductor (between body and contact) l2 (pre-soldering) a b c notedistance between body and contact must be met. l cable length heat-shrinkable tube ferule sleeve insulator contact body l 1 14.7 0.5 outer conductor heat-shrinkable tube sheath insulator ferule sleeve center conductor insulator no gap contact soldering measuring point (3.1) heat-shrinkable tube dies 6.2 0 -0.5 4 +0.2 -0.3 insulator outer conductor (between body and contact) l2 (pre-soldering) a b c notedistance between body and contact must be met. l cable length heat-shrinkable tube ferule sleeve insulator contact body l 1 14.7 0.5 outer conductor heat-shrinkable tube sheath insulator ferule sleeve center conductor insulator no gap contact soldering measuring point (3.1) heat-shrinkable tube dies 6.2 0 -0.5 4 +0.2 -0.3 insulator outer conductor 5.335.84 (between body and contact) l2 (pre-soldering) a b c cable length which require for the cable assembly. l=l1-3.3 l=l2+19.7 6ojunn iuuqxxxeelofudpkq 5/$y4fsjft ? 1mfbtfbdlopxmfehfuibuuiftqfdjpdbujpofudpguijtdbubmphnjhiudibohfczuifjnqspwfnfoufudxjuipvuopujdf y.psfpwfs uifdibsbdufsjtujdboeuiftqfdjpdbujpopguifqvcmjtifeqspevdubsfuifsfgfsfodfwbmvft y1mfbtfdpopsnuifdpoufouxjuiuifmbuftuefmjwfsztqfdjpdbujpotxifozpvvtfuifqspevdu
assembly instruction2 sleeve 14 ferule outer conductor outer conductor sheath cable boot b a center conductor center conductor crimp tool insulator crimping dies no gap contact contact crimped boot ferule sleeve contact body body crimp tool body surface tool surface boot sleeve 14 ferule outer conductor outer conductor sheath cable boot b a center conductor center conductor crimp tool insulator crimping dies no gap contact contact crimped boot ferule sleeve contact body body crimp tool body surface tool surface boot insert the boot into the cable and cut the cable as fg.1. please be careful to not damage the outer conductor. insert the ferule on the outer conductor and spread the top of the outer conductor. press-in rhe sleeve between insulator and outer conductor. cut the extra outer conductor along the sleeve. cut the insulator and center conductor as fg.3. part number a b tnc-p-2.5d2w-cr10-cf 5.0mm 4.0mm tnc-p-3d2w-cr10-cf 5.5mm 3.5mm pinch the contact in the crimping hole(center hole) and insert the center conductor of the cable. crimp the contact (match the side hole of contact with the curve of crimping hole of tool.) part number crimp tool tnc-p-2.5d2w-cr10-cf cr-h-1115 tnc-p-3d2w-cr10-cf cr-h-1135 insert the above contact into the body.match the key in the insulator and keyway of the contact. crimp the root of body as fg.5. cover the boot on the root of the connector body. 10 parts confgulration unitmm http://www.ddknet.co.jp tncseries please acknowledge that the specifcation etc. of this catalog might change by the improvement etc. without notice. moreover, the characteristic and the specifcation of the published product are the reference values. please confrm the content with the latest delivery specifcations when you use the product.
assembly instruction3 body sleeve boot contact assembly 19 outer conductor sheath boot sleeve cable 7 4 4 10 insulator cente conductor cut o? afterpre-soldering) outer conductor aluminum foil tape body boot sleeve 1 contact assembly soldering body sleeve boot contact assembly 19 outer conductor sheath boot sleeve cable 7 4 4 10 insulator cente conductor cut o? afterpre-soldering) outer conductor aluminum foil tape body boot sleeve 1 contact assembly soldering insert the boot and sleeve into the cable and cut the cable as fg.1. please be careful to not damage the outer conductor. cut the cable as fg.2. cut the center conductor after pre-soldering. insert the contact between outer conductor and aluminum foil tape. solder the contact with center conductor. when the solder is stick out, please shave the extra solder along the contact. cover the sleeve on the outer conductor and crimp as fg.4. crimp tool : (cr-h-1105) insert the above contact into the body and screw. cover the boot on the root of the body. 11 parts confgulration 6ojunn iuuqxxxeelofudpkq 5/$y4fsjft ? 1mfbtfbdlopxmfehfuibuuiftqfdjpdbujpofudpguijtdbubmphnjhiudibohfczuifjnqspwfnfoufudxjuipvuopujdf y.psfpwfs uifdibsbdufsjtujdboeuiftqfdjpdbujpopguifqvcmjtifeqspevdubsfuifsfgfsfodfwbmvft y1mfbtfdpopsnuifdpoufouxjuiuifmbuftuefmjwfsztqfdjpdbujpotxifozpvvtfuifqspevdu
assembly instruction4 a outer conductor sheath cable heat-shrinkable tube outer conductor sleeve ferule spread the top b c insulator center conductor pre-soldering outer conductor sleeve contact soldering no gap insulator heat-shrinkable tube crimping dies same level contact body insulator sleeve ferule heat-shrinkable tube a outer conductor sheath cable heat-shrinkable tube outer conductor sleeve ferule spread the top b c insulator center conductor pre-soldering outer conductor sleeve contact soldering no gap insulator heat-shrinkable tube crimping dies same level contact body insulator sleeve ferule heat-shrinkable tube insert the heat-shrinkable tube into the cable and cut the cable as fg.1. please be careful to not damage the outer conductor. part number a tnc-j-1.5dxw-cr10-120-cf 13.0mm tnc-j-2.5d2w-cr10-cf 11.0mm tnc-j-3d2w-cr10-cf 11.5mm tnc-bj-2.5dqew-cf 13.0mm insert the ferule on the outer conductor and spread the top of the outer conductor. press in the sleeve between outer conductor and insulator. cut of the extra outer conductor along the sleeve. cut the cable as fg.3. cut the center conductor after pre-soldering. please be careful to not damage the center conductor. part number b c tnc-j-1.5dxw-cr10-120-cf 5.7mm 2.8mm tnc-j-2.5d2w-cr10-cf 3.0mm 2.5mm tnc-j-3d2w-cr10-cf 3.1mm 2.5mm tnc-bj-2.5dqew-cf 6.0mm 2.0mm insert the insulator and solder the contact with center conductor. when the solder is stick out, please shave the extra solder along the contact. part number tool tnc-j-1.5dxw-cr10-120-cf cr-h-1100 tnc-j-2.5d2w-cr10-cf cr-h-1105 tnc-j-3d2w-cr10-cf cr-h-1135 tnc-bj-2.5dqew-cf cr-h-1105 insert the above contact into the body. match the key in the insulator and keyway of the contact. crimp the root of body as fg.5. cover the heat-shrinkable tube on the root of the body and heat up. 12 parts confgulration unitmm http://www.ddknet.co.jp tncseries please acknowledge that the specifcation etc. of this catalog might change by the improvement etc. without notice. moreover, the characteristic and the specifcation of the published product are the reference values. please confrm the content with the latest delivery specifcations when you use the product.
assembly instruction5 body contact insulator sleeve ferule heat-shrinkable tube a sheath outer conductor insulator ferule spread the top center conductor pre-soldering sleeve b ? c cut the center conductor after pre-soldering contact insulator soldering no gap same level body crimping dies heat-shrinkable tube body contact insulator sleeve ferule heat-shrinkable tube a sheath outer conductor insulator ferule spread the top center conductor pre-soldering sleeve b ? c cut the center conductor after pre-soldering contact insulator soldering no gap same level body crimping dies heat-shrinkable tube cut the cable as fg.1. please be careful to not damage the outer conductor. part number a tnc-pj-1.5dqew-cr10-cf 13.0mm tnc-pj-2h-1.5d-cr10-cf 10.0mm insert the ferule on the outer conductor and spread the top of the outer conductor. insert the sleeve and cut the cable as fg.3. press in the sleeve between outer conductor and insulator. cut of the extra outer conductor along the sleeve. cut the insulator and center conductor as below table. cut the center conductor after pre-soldering. please be careful to not damage the center conductor. part number b c tnc-pj-1.5dqew-cr10-cf 5.7mm 3.0mm tnc-pj-2h-1.5d-cr10-cf 4.0mm 3.0mm insert the insulator on the insulator of the cable and solder the contact with center conductor. when the solder is stick out, please shave the extra solder along the contact. insert the above contact into the body. match the key in the insulator and keyway of the contact. crimp the root of body as fg.5. cover the heat-shrinkable tube on the root of the body and heat up. 13 parts confgulration part number tool tnc-pj-1.5dqew-cr10-cf cr-h1142 tnc-pj-2h-1.5d-cr10-cf cr-h1101 6ojunn iuuqxxxeelofudpkq 5/$y4fsjft ? 1mfbtfbdlopxmfehfuibuuiftqfdjpdbujpofudpguijtdbubmphnjhiudibohfczuifjnqspwfnfoufudxjuipvuopujdf y.psfpwfs uifdibsbdufsjtujdboeuiftqfdjpdbujpopguifqvcmjtifeqspevdubsfuifsfgfsfodfwbmvft y1mfbtfdpopsnuifdpoufouxjuiuifmbuftuefmjwfsztqfdjpdbujpotxifozpvvtfuifqspevdu
assembly instruction6 nut washer gasket clamp contact body l 3d-2v l1 10 outer conductor sheath gasket washer nut insulator center conductor pre-soldering clamp pick the outer conductor and turn down to the clamp trim the outer conductor along the clamp 3 +0.5 0 0 -0.5 3 soldering contact no gap insulator body body assembly gap between body and contact 0.21 +0.23 -0.13 flat diameter9.5 0.2 flat diameter 9.5 0.2 nut washer gasket clamp contact body l 3d-2v l1 10 outer conductor sheath gasket washer nut insulator center conductor pre-soldering clamp pick the outer conductor and turn down to the clamp trim the outer conductor along the clamp 3 +0.5 0 0 -0.5 3 soldering contact no gap insulator body body assembly gap between body and contact 0.21 +0.23 -0.13 flat diameter9.5 0.2 flat diameter 9.5 0.2 the cable length require for the cable assembly l1=l-x insert nut, washer and gasket into the cable and cut the cable as fg.2. please be careful to not damage the outer conductor. insert the clamp on the outer conductor and turn down the outer conductor. cut the outer conductor along the clamp. cut the insulator as fg.3. please be careful to not damage the center conductor. cut the center conductor after pre-soldering. insert the contact and solder the contact with center conductor. please bee careful to not damage the insulator by heat. insert the above contact into the body. insert the the gasket and washer into the body and screw the nut. recommended torque : 117.5 ? 147n?cm (12 ? 15kgf?cm 14 parts confgulration unitmm http://www.ddknet.co.jp tncseries please acknowledge that the specifcation etc. of this catalog might change by the improvement etc. without notice. moreover, the characteristic and the specifcation of the published product are the reference values. please confrm the content with the latest delivery specifcations when you use the product.
assembly instruction7 4 0.5 15 +1 0 (9.7) 2.9 0 -1 pre-soldering same level between contact and washer body surface interface dimension crimp height ???each sides heat-shrinkable tube ferule insulator contact body l 1 cable outer conductor heat-shrinkable tube sheath ferule pick and spread the top insulator center conductor insulator contact soldering no gap b a c l/2 l measurering point body 4.98 0.25 diesa cable assembly heat-shrinkable tube 4 0.5 15 +1 0 (9.7) 2.9 0 -1 pre-soldering same level between contact and washer body surface interface dimension crimp height ???each sides heat-shrinkable tube ferule insulator contact body l 1 cable outer conductor heat-shrinkable tube sheath ferule pick and spread the top insulator center conductor insulator contact soldering no gap b a c l/2 l measurering point body 4.98 0.25 diesa cable assembly heat-shrinkable tube 4 0.5 15 +1 0 (9.7) 2.9 0 -1 pre-soldering same level between contact and washer body surface interface dimension crimp height ???each sides heat-shrinkable tube ferule insulator contact body l 1 cable outer conductor heat-shrinkable tube sheath ferule pick and spread the top insulator center conductor insulator contact soldering no gap b a c l/2 l measurering point body 4.98 0.25 diesa cable assembly heat-shrinkable tube 4 0.5 15 +1 0 (9.7) 2.9 0 -1 pre-soldering same level between contact and washer body surface interface dimension crimp height ???each sides heat-shrinkable tube ferule insulator contact body l 1 cable outer conductor heat-shrinkable tube sheath ferule pick and spread the top insulator center conductor insulator contact soldering no gap b a c l/2 l measurering point body 4.98 0.25 diesa cable assembly heat-shrinkable tube 4 0.5 15 +1 0 (9.7) 2.9 0 -1 pre-soldering same level between contact and washer body surface interface dimension crimp height ???each sides heat-shrinkable tube ferule insulator contact body l 1 cable outer conductor heat-shrinkable tube sheath ferule pick and spread the top insulator center conductor insulator contact soldering no gap b a c l/2 l measurering point body 4.98 0.25 diesa cable assembly heat-shrinkable tube 4 0.5 15 +1 0 (9.7) 2.9 0 -1 pre-soldering same level between contact and washer body surface interface dimension crimp height ???each sides heat-shrinkable tube ferule insulator contact body l 1 cable outer conductor heat-shrinkable tube sheath ferule pick and spread the top insulator center conductor insulator contact soldering no gap b a c l/2 l measurering point body 4.98 0.25 diesa cable assembly heat-shrinkable tube 4 0.5 15 +1 0 (9.7) 2.9 0 -1 pre-soldering same level between contact and washer body surface interface dimension crimp height ???each sides heat-shrinkable tube ferule insulator contact body l 1 cable outer conductor heat-shrinkable tube sheath ferule pick and spread the top insulator center conductor insulator contact soldering no gap b a c l/2 l measurering point body 4.98 0.25 diesa cable assembly heat-shrinkable tube parts confgulration cable length which require for the cable assembly. l=l1-10.5 insert the heat-shrinkable tube into the cable. cut the cable as fg.1. noteplease be careful to not damage the outer conductor. insert the ferule on the outer conductor pick and spread the outer conductor. turn down the outer conductor to the ferule and cut the outer conductor as fg.3. cut the insulator as fg. 3 and pre-solder the center conductor. and cut the center conductor as fg.3. noteplease be careful to not center conductor. insert the insulator into the cable, solder up the contact with center conductor. notewhen the solder is stick out, please shave the extra solder along the contact. insert the body into the above cable assembly and crimp the root of the body. notewhen inserting the body, match the contact notch with projection of insulator. notecrimp the body with same level of body and dies. notemeet the interface dimension and crimp height cover the heat-shrinkable tube on the root of the body and heat up. 6ojunn iuuqxxxeelofudpkq 5/$y4fsjft ? 1mfbtfbdlopxmfehfuibuuiftqfdjpdbujpofudpguijtdbubmphnjhiudibohfczuifjnqspwfnfoufudxjuipvuopujdf y.psfpwfs uifdibsbdufsjtujdboeuiftqfdjpdbujpopguifqvcmjtifeqspevdubsfuifsfgfsfodfwbmvft y1mfbtfdpopsnuifdpoufouxjuiuifmbuftuefmjwfsztqfdjpdbujpotxifozpvvtfuifqspevdu

▲Up To Search▲

Price & Availability of TNC-R-NICAU-CF

	To Download TNC-R-NICAU-CF Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .