components product information connector new mb-0298-1 2015/7/27 jae pmk div. proprietary. copyright ? 2015, japan aviation electronics industry, ltd. 1/5 ? 2.0mm side pitch, 2 row 10 contact type. ? high-speed impedance matching design, co mpatible with usb 3.0 transmission specification. ? differential line compatible with 5gbps equivalent: 2 pair, differential line compatible with 480mbps equivalent: 1 pair ? compatible not only with u sb 3.0 but also with other high-speed transmissions. ? adopts double metal shell shieldin g structure for emi control. ? robust design with consideratio n for automotive on-board use. ? in-line type is also available with consideration for cable wiring routing. ? available as a completed harness to ensure transmission performance reliability. ? no. of contacts: 10 pos. ? operating temperature: -40 deg. c to +85 deg. c ? contact resistance: 8m ? max. (initial) ? insulation resistance: 100m ? min. (when mated) ? rated current: 2.2a (power / gnd line) ? dielectric withstanding voltage: ac 1,000v (applied for 1 minute when mated) ? applicable board: 1.6 mm ? applicable wire: shielded twist pair cable (sold only as a harness product) MX62 series usb3.0 high-speed transmission connector for automotive along with the spread of usb 3.0 compatible devices in the consumer products market, recently, the users considering applications using usb 3.0 are incr easing for automotive infotainment applications. to meet these demands, the mx 62 series has been developed to comply with usb3.0 for automotive applications. the MX62 series is a connector compatible with usb3.0 transmission specifications, designed to satisfy 5gbps high-speed; ac hieving both mechanical and environmental performances for requirements used for automotive application. also it adopts shielded wires exclusivel y developed for automotive applications. right angle pin connector socket connector in-line connector features general specifications rohs compliant
mb-0298-1 jae pmk div. proprietary. copyright ? 2015, japan aviation electronics industry, ltd. 2/5 component material / finish outer housing, retainer, rear cover pbt inner housing lcp-gf35 holder 9tny-gf45 terminal brass / contact area au plating connection area sn plating shell a copper alloy / sn plating shell b brass / sn plating sleeve brass / sn plating component material / finish outer housing pps-gf40 inner housing lcp-gf35 terminal brass / contact area au plating connection area sn plating inner shell copper alloy / sn plating outer shell brass / sn plating ? right angle pin connector note) please consult us concerning packaging. ? socket connector ? in-line connector materials and finishes component material / finish outer housing, retainer, rear cover pbt inner housing lcp-gf35 holder 9tny-gf45 terminal copper alloy / contact area au plating connection area sn plating shell a copper alloy / sn plating shell b brass / sn plating sleeve brass / sn plating
mb-0298-1 jae pmk div. proprietary. copyright ? 2015, japan aviation electronics industry, ltd. 3/5 ? right angle pin connector (MX62010hq1) drawing no.: sj113305 unit: mm outer dimensions
mb-0298-1 jae pmk div. proprietary. copyright ? 2015, japan aviation electronics industry, ltd. 4/5 ? socket connector (MX62010fq1) sj drawing no.: sj113309 note) socket connector is to be sold as a harness product. it is not available as an individual connector. unit: mm outer dimensions
mb-0298-1 jae pmk div. proprietary. copyright ? 2015, japan aviation electronics industry, ltd. 5/5 ? in-line connector (MX62010mq1) sj drawing: sj113827 specifications: jacs-10959 product marketing division aobadai building, 3-1-19, aobadai, meguro-ku, tokyo 153-8539 phone: +81-3-3780-2882 fax: +81-3-3780-2946 * the specifications in this brochure are subject to change without notice. please contact jae for information. notice: 1. the values specified in this brochure are only for reference. the products and their specifications are subject to change wi thout notice. contact our sales staff for further information be fore considering or ordering any of our products. for purchase, a product specification must be agreed upon. 2. users are requested to provide protecti on circuits and redundancy circuits to ensure safety of the equipment, and sufficient ly review the suitability of jae's products to the equipment. 3. the products presented in this brochure are designed for the uses recommended below. we strongly suggest you contact our sales staff when considering use of any of the products in any other way than the recommend ed applications or for a specific use that requires an extremely high reliability. (1) applications that require consultation: (i) please contact us if you are considering use involving a qua lity assurance program that you specify or that is peculiar to the industry, such as: automotive electrical components, train cont rol, telecommunications devi ces (mainline), traffic light control, electric power, combustion control, fire prevention or security systems, disaster prevention equipment, etc. (ii) we may separately give you our s upport with a quality assurance program that you specify, when you think of a use such as : aviation or space equipment, submarine repeaters, nuclear power control systems, medical equipment for life support, etc. (2) recommended applications include: computers, office appliances, telecommunications devices (termina ls, mobile units), measuring e quipment, audiovisual equipment, home electric appliances, factory automation equipment, etc unit: mm outer dimensions others note) in-line connector is to be sold as a harness product. it is not available as an individual connector.
|
