mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact us for your application specifc requirements: mtronpti 1-800-762-8800. revision: 03-02-07 this product is not recommended for new designs. please refer to the m3h product series. k3500g series 8 pin dip, 3.3 volt, cmos, clock oscillator ? 4-pin package, compatible with 8-pin dil ? 1.0mhz to 70mhz frequency range ? cmos compatible tight symmetry (45/55%) available ? tri-state option available ? 100ppm stability standard - k3500gc tighter stabilities available 25ppm stability:- k3500ga 50ppm stability:- k3500gb ? case ground for emi protection 2553 n. edgington street, franklin park, il 60131 y phone: 847.451.1000 y fax: 847.451.7585 800-888-1499 or www.champtech.com 1 model k3500ga frequency range (mhz) 1.0 to 125 frequency stability (ppm) overall inclusive of calibration, temperature, voltage, load, shock,vibration, aging 0c to 70c 25 temperature range (c) operating -40c to +85c storage -55c to +125c supply voltage (v) +3.3 5% supply current (ma) <30 symmetry (%) 40/60 e l e c t r i c a l s p e c i f i c at i o n s start up time (ms) <10 pa r t n u m b e r i n g g u i d e k3500gxxxx - specify frequency blank = fixed frequency e = tri-state blank = 0 o c to 70 o c operating temperature m = -40 o c to 85 o c operating temperature blank = 40/60% symmetry s = 45/55 symmetry a 25ppm frequency stability (available 0/70 o c only) b = 50 ppm frequency stability c = 100ppm frequency stability d = 20ppm frequency stability k3500g series 3.3v crystal clock oscillators ?????? ?????????? ????????????? ??????????? ?????? ? ?? ??? ???????????? ????? output cmos 0 level (v ol ) 0.9 v cc 1 level (v oh ) 0.1 v cc load up to 80mhz 50pf; >80mhz 30pf t r & t f (ns) <10 jitter (typical) 10ps rms @ 100mhz -40c to 85c k3500gc k3500gb 50 100 50 100 n/a
mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact us for your application specifc requirements: mtronpti 1-800-762-8800. revision: 03-02-07 k3500g series 8 pin dip, 3.3 volt, cmos, clock oscillator this product is not recommended for new designs. please refer to the m3h product series. 2553 n. edgington street, franklin park, il 60131 y phone: 847.451.1000 y fax: 847.451.7585 800-888-1499 or www.champtech.com 2 output waveform test circuit diagram pin function n/c / tri-state 1 2 3 ground output 4 + v cc k3500g series 3.3v crystal clock oscillators test methods reference procedures description temperature cycle mil-std-833, mtd 1010, cond. b mechanical shock mil-std-883, mtd 2002, cond. b -55c to +125c; air-to-air; 100 cycles; 10 min. dwell vibration mil-std 883, mtd 2007, cond. b 20-2000 hz; 0.06 inch; 15gs; 3 planes humidity steady state mil-std-202, mtd 103 40c; 90%-95% r.h.; 56 days thermal shock mil-std-883, mtd 1011.7 cond. b electrostatic discharge solderability hermeticity resistance to soldering lead integrity marking permanence life test 100c to 0c; water-to-water; 15 cycles 2 kv to 4 kv threshold solder dip; meniscograph criteria mass spectro. 2 x 10-8 atmos. cc/sec he 235c; 30 seconds lead tension & bend stress resistance to solvents 1500 gs mil-std-883, mtd 3015 class ii mil-std-883, mtd 1005.6 mil-std-883, mtd 2022.2 mil-std-883, mtd 1014.8, cond. a1 mil-std-202, mtd 210d, cond. j mil-std-883, mtd 2004.5, cond. a, b1 mil-std-883, mtd 2015.8 125 c, powered, 1000 hours minimum mechanical and environmental specifications shipping tube cross section
|