specification model rs-75-3.3 rs-75-5 rs-75-12 rs-75-15 RS-75-24 rs-75-48 dc voltage rated current current range rated power ripple & noise (max.) note.2 output voltage adj. range voltage tolerance note.3 line regulation note.4 load regulation note.5 setup, rise time hold time (typ.) voltage range frequency range efficiency(typ.) ac current (typ.) input inrush current (typ.) leakage current safety standards harmonic current ems immunity working temp. working humidity storage temp., humidity temp. coefficient vibration mtbf dimension others note packing over load over voltage 3.3v 5v 12v 15v 24v 48v 15a 12a 6a 5a 3.2a 1.6a 0 ~ 15a 0 ~ 12a 0 ~ 6a 0 ~ 5a 0 ~ 3.2a 0 ~ 1.6a 49.5w 60w 72w 75w 76.8w 76.8w 80mvp-p 80mvp-p 120mvp-p 120mvp-p 120mvp-p 200mvp-p 3v ~ 3.6v 4.75 ~ 5.5v 10.8 ~ 13.2v 13.5 ~ 16.5v 22 ~ 27.6v 42 ~ 54v 3.0% 2.0% 1.0% 1.0% 1.0% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 2.0% 1.0% 500ms, 30ms/230vac 1200ms, 30ms/115vac at full load 60ms/230vac 14ms/115vac at full load 88 ~ 264vac 125 ~ 373vdc (withstand 300vac surge for 5sec. without damage) 47 ~ 63hz 71% 3.8 ~ 4.45v 5.75 ~ 6.75v 13.8 ~ 16.2v 17.25 ~ 20.25v 27.6 ~ 32.4v 55.2 ~ 64.8v 76% 81% 82% 85% 86% 2a/115vac 1.2a/230vac cold start 40a/230vac <2ma / 240vac 110 ~ 150% rated output power protection type : hiccup mode, recovers automatically after fault condition is removed ul60950-1, tuv en60950-1 approved compliance to en55022 (cispr22) class b compliance to en61000-3-2,-3 -25 ~ +70 (refer to output load derating curve) 20 ~ 90% rh non-condensing -40 ~ +85 , 10 ~ 95% rh 0.03%/ (0~50 ) 10 ~ 500hz, 5g 10min./1cycle, period for 60min. each along x, y, z axes 265khrs min. mil-hdbk-217f (25 ) 129*97*38mm (l*w*h) 1. all parameters not specially mentioned are measured at 230vac input, rated load and 25 of ambient temperature. 2. ripple & noise are measured at 20mhz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. tolerance : includes set up tolerance, line regulation and load regulation. 4. line regulation is measured from low line to high line at rated load. 5. load regulation is measured from 0% to 100% rated load. 6. the power supply is considered a component which will be installed into a final equipment. the final equipment must be re-confirmed that it still meets emc directives. protection type : hiccup mode, recovers automatically after fault condition is removed 0.41kg; 30pcs/13.3kg/0.86cuft 75w single output switching power supply universal ac input / full range protections:short circuit/over load/over voltage cooling by free air convection led indicator for power on 100% full load burn-in test all using 105 withstand 300vac surge input for 5 second high operating temperature up to 70 withstand 5g vibration test high efficiency, long life and high reliability 3 years warranty long life electrolytic capacitors features : r s - 7 5 s e r i e s withstand voltage isolation resistance i/p-o/p:3kvac i/p-fg:1.5kvac o/p-fg:0.5kvac i/p-o/p, i/p-fg, o/p-fg:100m ohms/500vdc environment emi conduction & radiation safety & emc (note 6) protection compliance to en61000-4-2,3,4,5,6,8,11; env50204, en61000-6-2 (en50082-2) heavy industry level, criteria a authorized distributor: total power international, inc. toll free: 877-646-0900(us) ph# (978) 453-727 2 www.total-power.com
mechanical specification case no. 903 unit:mm ambient temperature ( ) load (%) -25 -25 0 0 2010 30 40 20 40 80 60 100 6050 5 4 3 2 1 4.5 8.2 9.5 73.5 9 122.5 31 33 98 85.5 3.5 2-m3 129 7 120 6.5 18.5 3.5 3.5 77 32 70 output derating vs input voltage input voltage (vac) 60hz 88 10095 120115 160140 200180 240220 264 load (%) ta=25 90 100 80 70 60 50 40 others 3.3v,5v 38 28.5 3.5 3-m3 9.5 18 (horizontal) terminal pin. no assignment pin no. pin no. 1 2 4 3 5 assignment assignment dc output -v dc output +v fg ac/l ac/n output derating 75w single output switching power supply r s - 7 5 s e r i e s authorized distributor: total power international, inc. toll free: 877-646-0900(us) ph# (978) 453-727 2 www.total-power.com
|
