technical data sheet reverse sma right angle plug reverse polarity 32RS247-302L5 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 1 / 2 rf_35/12.04/3.0 all dimensions are in mm; tole rances according to iso 2768 m-h interface according to rosenberger 32rs000-000, series reverse sma derived from iec 60169-15; en 122110; mil-std-348a, fig. 310 compliant with fcc standard (part 15; section 15.203) documents assembly instruction 32 b6 material and plating connector parts material plating center contact cube aurodur?, gold plated outer contact brass aurodur?, gold plated body brass aurodur?, gold plated dielectric ptfe gasket silicone coupling nut brass aurodur?, gold plated crimping ferrule copper gold, 0.1 m
technical data sheet reverse sma right angle plug reverse polarity 32RS247-302L5 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/12.04/3.0 f(ghz) electrical data impedance 50 ? frequency dc to 12.4 ghz vswr ? 1.05 + 0.01 x f [ghz], dc to 5 ghz insertion loss ? 0.05 x db, dc to 5 ghz insulation resistance ? 5 x10 3 m ? center contact resistance ? 3 m ? outer contact resistance ? 2 m ? test voltage 1000 v rms working voltage 480 v rms power handling (at 20 c, sea level, vswr 1.0) ? 200 w @ 2 ghz rf-leakage ? 100 db up to 1 ghz - limitations are possible due to the used cable type - mechanical data mating cycles min. 100 coupling nut retention ? 180 n center contact captivation: axial ? 20 n coupling test torque max. 0.6 nm recommended torque 0.5 nm environmental data temperature range -65c to +165c thermal shock mil-std-202, meth. 107, cond. b corrosion mil-std-202, meth. 101, cond. b vibration mil-std-202, meth. 204, cond. d shock mil-std-202, meth. 213, cond. i moisture resistance mil-std-202, meth. 106 rohs compliant tooling crimping tool 11w150-000 crimp insert 11w150-102 suitable cables rg 174 a/u, rg 188 a/u, rg 316 /u weight weight 4.9 g/pce draft date approved date rev. engineering change number name date chr. entsfellner 09/07/08 sa. krautenbacher 14.03.14 d00 14-0352 t. krojer 14.03.14 while the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warran ty on our part and no statement herein shall be construed as recommendation to infringe existin g patents. in the effort to improve our products, we reserve the right to ma ke changes judged to be necessary.
|
