for further information contact your local stmicroelectronics sales office. june 2014 docid026569 rev 1 1/4 MR31ZD40 st31-k330a platform secure dual interface mcu with enhanced security and 40 kbytes of eeprom (mifare? supported) data brief features hardware features ? arm? securcore? sc000? 32-bit risc core ? 245 kbytes of user rom ? 8 kbytes of user ram ? 40 kbytes of user eeprom ? cpu clock frequency up to 28 mhz ? power-saving standby state ? contact assignment compatible with iso/iec 7816-3 standards ? asynchronous receiver transmitter (iart) for high speed serial data support (iso/iec 7816-3 t=0/t=1 and emv compliant) ? esd protection greater than 5 kv (hbm) contactless features ? complies with iso/iec 14443 type a, b and b?, and paypass? standards ? 13.56 mhz carrier frequency ? rfuart (rf universal asynchronous receiver transmitter) up to 848 kbps ? very high bit rate (vhbr): tx = 6.8 mbps and rx = 1.7 mbps ? simultaneous mode (contact and contactless) ? 4-kbyte rf frame buffer in dedicated rfuart ram ? mifare plus? and mifare? desfire? ev1 hw and sw implementation ? mifare? classic available as part of mifare plus? security features ? three-key triple des accelerator ? aes accelerator ? nescrypt coprocessor for public key cryptography algorithm ? protection against multiple attacks www.st.com
description MR31ZD40 2/4 docid026569 rev 1 1 description designed for secure id and banking applications, the MR31ZD40 is a serial access microcontroller that incorporates the most recent generation of arm? processors for embedded secure systems. its securcore? sc000? 32-bit risc core is built on the cortex?-m0 core with additional security features to help to protect against advanced forms of attacks. cadenced at 28 mhz, the securcore? sc000? core brings great performance and excellent code density thanks to the arm? thumb?-2 instruction set. mr31z devices implement mifare? desfire? ev1 or mifare plus? (including mifare? classic) technology. mifare, mifare plus, mifare desfire and mifare classic are registered trademarks of nxp b.v. and are used under license. an rf interface including an rf universal asynchronous receiver (rfuart) enables contactless communication up to 848 kbps compatible with the iso/iec 14443 type a and type b standards. very high bit rates (vhbr, tx = 6.8 mbps and rx = 1.7 mbps) are possible in type b frames. a simultaneous mode where contactless communication can be enabled while the device is in contact mode is also available. the MR31ZD40 also offers a serial communication interface fully compatible with the iso/iec 7816-3 standard (t=0, t=1). two 16-bit general-purpose timers are available; one is configurable as a watchdog. the MR31ZD40 features hardware accelerators for advanced cryptographic functions. the aes accelerator provides a high-performance implementation of aes-128, aes-192, aes-256 algorithms. the 3-key triple des accelerator (edes+) peripheral enables cipher block chaining (cbc) mode, fast des and triple des computation based on three key registers and one data register, while the nescrypt crypto-processor efficiently supports the public key algorithm with native operations up to 4096 bits long. the mr31z family operates in the ?25 to +85 c temperature range, at 3 v and 5 v supply voltage ranges in contact mode and complies with iso/iec 14443 specification limits. a comprehensive range of power-saving modes enables the design of efficient low-power and contactless applications.
docid026569 rev 1 3/4 MR31ZD40 revision history 4 software development tools description dedicated securcore? sc000? software development tools are provided by arm? and keil?. this includes the instruction set simulator (iss) and c compiler. the documentation is available on the arm? and keil? web sites. moreover, stmicroelectronics provides: ? a time-accurate hardware emulator controlled by the keil? debugger tool and the st development environment. ? a complete product simulator based on keil? iss simulator for the securcore? sc000? cpu. 2 revision history table 1. document revision history date revision changes 19-jun-2014 1 initial release.
MR31ZD40 4/4 docid026569 rev 1 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. a ll st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a particular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. st products are not designed or authorized for use in: (a) safety critical applications such as life supporting, active implanted devices or systems with product functional safety requirements; (b) aeronautic applications; (c) automotive applications or environments, and/or (d) aerospace applications or environments. where st products are not designed for such use, the purchaser shall use products at purchaser?s sole risk, even if st has been informed in writing of such usage, unless a product is expressly designated by st as being intended for ?automotive, automotive safety or medical? industr y domains according to st product design specifications. products formally escc, qml or jan qualified are deemed suitable for use in aerospace by the corresponding governmental agency. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2014 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - italy - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com
|
