datasheet | march 2014 fiber optics | rev 2014.03 information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. applications catv supertrunking high power distri bution networks redundant ring architectures fttx networks features high saturation output power up to 27 dbm (pre-splitter) dual power supplies, redundant & hot swappable ? ac or dc front panel optical input & output monitor ports snmpv2 control interface web server ipv4 10/100bt low noise figure for catv wide input dynamic range very stable output power over a wide operating temperature range optional automatic gain control or constant output power operation optional gain flatness specifications the medallion 7100 series product line is a family of state-of-the-art high performance catv erbium doped fiber amplifiers (edfa). packaged in convenient 1 ru housing, this line of fiber amplifiers has been design optimized for superior output power stability and the exceptionally low noise figures demanded by catv applications. the medallion 7100 provides very stable optical outputs over a wide operating temperature range. internally it is s upported with input and output isolators for enhanced system stability and performanc e. optical power is continuously monitored at the input and output for aut omatic power control during operation over a wide operating temperature range. the medallion 7100 offers a full range of flexible configurations and a rich set of features. these include remote management capability through snmpv2, telnet and a resident web server. the medallion 7100 also supports mibs specified by scte (society of cable television engineer s) for this product class. for local management, an rs-232 port is standard, along with a convenient front panel control menu provided on a vacuum fl u orescent display (vfd). high level features automatic power control and/or automatic gain control modes port count, optical power, and connector style options gain flattened options for wdm applications monitors & alarms loss of input signal loss of output power pump laser diode bias current pump ld temperature case temperature redundant power supplies redundant fans medallion 7100 series catv fiber amplifier erbium doped fiber amplifier (edfa)
` datasheet | march 2014 fiber optics | rev 2014.03 information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. electrical characteristics property symbol min typ max unit ac power supply voltage v ac 85 265 v ac dc power supply voltage v dc -36 -48 -72 v dc power consumption note 1 p tot 10 w note 1: 10 w valid at 0 dbm input and 14 dbm output po wer within specified operating temperature range. optical characteristics property symbol min typ max unit wavelength range v ac 1528 1550 1562 nm input power p in -10 0 12 dbm total ouput power options note 1 p out 14 27 dbm output power delta to nominal p out -0.5 0.5 db output port count options (sc) notes 1,2 - 1 10 noise figure note 3 nf 5.0 db optical isolation iso 30 db input power alarm los -12 -11 -10 dbm input monitor loss i mon 22 23 24 db output monitor loss o mon 22 23 34 db note 1: pre-splitter total output power. number of ports vary by model type. note 2: model types are specified by output power per port. output power per port is limited to 21 dbm note 3: test condition with input power = 0 dbm (@ 1550 nm) note 4: specifications valid wi thin operating temperature range. absolute maximum ratings property symbol min typ max unit operating temperature range to 0 50 o c storage temperature range ts -40 85 o c relative humidity h 0 95 % medallion 7100 series catv fiber amplifier erbium doped fiber amplifier (edfa)
` datasheet | march 2014 fiber optics | rev 2014.03 information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. outline drawing medallion 7100 series catv fiber amplifier erbium doped fiber amplifier (edfa)
` datasheet | march 2014 fiber optics | rev 2014.03 information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. european union ?rohs directive? compliance except for the exemption claimed herein for lead used in solder for network infrastructure equipment, all homogenous materials contained in the product contain less than the ma ximum concentration levels for lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls and polybro minated biphenyl ethers permitted under the european union directive 2002/95/ec (t he "rohs directive"). model number information 7100 - - - logo & customer specific gain flattened output power per port number of ports optics optical input optical output optical monitor power supply 0= emcore logo 0 = gain flattened xx = xxdbm/port (maximum: xx=21dbm) 01 = 1 port 1 = sc/apc 1 = front 1= front 1= input front, output front 1 = ac primary, no secondary 1=no logo 1 = not gain flattened 02 = 2 ports 2 = fc/apc 2 = rear 2= rear 2 = input rear, output rear 2 =dc primary, no secondary 04 = 4 ports 3 = e2000 3 = none 3 =ac primary, ac secondary 08 = 8 ports 4 = sc/apc angled 4 =ac primary, dc secondary 10 = 10 ports 5= fc/apc angled 5 =dc primary, dc secondary 6= e2000 angled note 1: not all configurations are available; please contact your emcore sales representative. e.g. 7100-1401-11135 (14 dbm per port, 1 port, sc/apc, front fiber, dual dc) e.g. 7100-1708-11133 (17 dbm per port, 8 ports, sc/apc, front fiber, dual ac) medallion 7100 catv fiber amplifier erbium doped fiber amplifier (edfa)
` datasheet | march 2014 fiber optics | rev 2014.03 information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. laser safety information class 1m laser products iec 60825-1:2007 en 60825-1:2007 complies with 21 crf 1040.10 and 1040.11 except for deviati ons pursuant to laser notice no. 50 dated june 24, 2007 caution: use of controls, adjustment and procedures other than those specified herein may result in hazardous laser radiation exposure. medallion 7100 catv fiber amplifier erbium doped fiber amplifier (edfa)
|
