^zmi-donauckoi zpioaucti, one. MJE350 plastic medium power pnp silicon transistor this device is designed for use in line-operated applications such as low power, line-operated series pass and switching regulators requiring pnp capability. features ? high collector-emitter sustaining voltage - vceo(sus)=300vdc@ic = 1.0 madc ? excellent dc current gain - hfe = 30-240@ic = 50 madc ? plastic thermopad package maximum ratings telephone: (973) 376-2922 (212)227-6005 fax: (973) 376-8960 0.5 ampere power transistor pnp silicon 300 volts, 20 watts rating collector-emitter voltage emitter-base voltage collector current - continuous total power dissipation @ tc = 25 c derate above 25 c operating and storage junction temperature range symbol vceo veb ic pd tj, ts,g value 300 3.0 500 20 0.16 -65 to +150 unit vdc vdc madc w mw/c c to-225 thermal characteristics characteristic thermal resistance, junction-to-case symbol 9jc max 6.25 unit c/w stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above the recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may affect device reliability. electrical characteristics (tc = 25c unless otherwise noted) characteristic | symbol min max unit | off characteristics collector-emitter sustaining voltage (lc = 1 .0 madc, ib = 0) collector cutoff current (vcb = 300 vdc, ie = 0) emitter cutoff current (veb = 3.0 vdc, lc = 0) vceo(sus) icbo !ebo 300 - _ - 100 100 vdc i^adc (iadc on characteristics dc current gain (lc = 50 madc, vce = 1 0 vdc) hfe 30 240 - nj semi-conductors reserves the right to change test conditions, parameter limits and package dimensions without notice. information furnished by n.i semi-conductors is believed to be both accurate and reliable at the time of going to press. however, nj semi-conductors assumes no responsibility for any errors or omissions discovered in its use. nj semi-conductors entourages customers to verify that datasheets are current before placing orders. quality semi-conductors
MJE350 package dimensions to-225 m | 0.25 (0.010)? notes: 1. dimensioning and tolerancing per ansi y14.5m, 1982. 2. controlling dimension: inch, 3. 077-01 thru -08 obsolete, new standard 077-09. a ?|b( .25 (0.010)? | a ? | b?\m a b c d f g h j k m 0 r s u v inches min 0.425 0.295 0.095 0.020 0.115 0.094 0.050 0.015 0.575 5 0.148 0.045 0.025 0.145 0.040 max 0.435 0.305 0.105 0.026 0.130 bsc 0.095 0.025 0.655 yp 0.158 ^.065 0.035 0,155 ? millimeters min 10.80 7.50 2.42 0.51 2.93 2.39 1.27 0.39 14.61 5 3.76 1.15 0.64 3.69 1.02 max 11.04 7.74 2.66 0.66 3.30 bsc 2.41 0.63 16.63 yp 4.01 1.65 0.88 __ 3.93 ... style 1: pin1. emitter 2. collector 3. base
|
