model 601 he www.vishay.com vishay spectrol revision: 25-jul-12 1 document number: 57094 for technical questions, contact: sferprecisionpot@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 full 360 smart sensor (hall effect technology) features ? absolute ratiometric output over 360 range with no dead band ? self-contained package not requiring external electronic interface ? contactless technology ? reverse polarity protection ? non volatile po sitioning output ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 the model 601-he represents a new generation of smart sensors in contactless technology based on the hall effect principle. this unique electronic device is a self-c ontained package which provides an analog electrical output over a full 360 without t he need of external electronics. the low power consumption and non-volatile output makes this universal sensor the real cost-effective alternative to encoders. quick reference data sensor type rotational, single turn hall effect output type output by pins (connector) market appliance industrial dimensions 33 mm x 44 mm x 20 mm standard electrical specifications parameter supply 4.5 v dc to 5.5 v dc supply current 16 ma max. over voltage protection 10 v independent linearity 1 % electrical trac k 360 continuous analog voltage output 5 % to 95 % of supply (ratiometric) cw or ccw see graphs on next page output ramp slope electrically switchable - see graphs temperature coefficient v out / t 125 v/c typ. hysteresis static 0.8 max. mechanical specifications rotation 360 continuous rotational speed (max.) 120 rpm operating torque max. 0.25 oz.-in (18 g-cm) weight 30 g environmental specifications operating life 5 000 000 cycles operating temperature range - 45 c to + 85 c storage temperature range - 45 c to + 85 c sealing ip54 ordering information/description 601 he 0000 bo1 e4 model configuration code packaging lead finish product number ? 1.57 pin ? 3.18 pin box of 1 piece 0000 yes yes 0001 yes - 0002 - yes 0003 - - sap part numbering guidelines 601 he 0001 b01 model pin configuration packaging
model 601 he www.vishay.com vishay spectrol revision: 25-jul-12 2 document number: 57094 for technical questions, contact: sferprecisionpot@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions in millimeters function 1+ 5 v supply 20 v o/p voltage connected to 0 v: ccw open circuit or connected to 5 v: cw spectrol 44 he-xxxx xxxx 1 2 3 4 product no. date code and terminal i.d. label 27.8 23.5 14.3 8.0 1.6 ? 1.5 7 ? 3.18 0.80 anti-rotation pin option to be specified see ordering information pat. app. 99087991 42 20 3 / 8 - 32 unef 2a . ? 6.35 33 4 direction 3 output pin connections material specifications housing plastic bushing brass, nickel plated shaft stainless steel pin terminal connector gold plated output connection pin header to suit idc connectors. e.g. panduit c100 - f22 and molex 7880 bushing mount hardware lock washer, internal tooth steel, nickel plated panel nut brass, nickel plated cable assembly for connection part number 601-1056-0000 description molex kk 4-way crimp connector 4 wire (250 mm) model: 601 he when pin 4 connected to 5 v or open circuit supply (5 v nom) 0360 cw shaft rotation () transition time 50 s typ. supply (5 v nom) cw shaft rotation () model: 601 he when pin 4 connected to 0 v transition time 50 s typ. 95 % 5 % 95 % 5 %
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
