website: www.kingtronics.com email: info@kingtronics.com tel: (852) 8106 7033 fax: (852) 8106 7099 1 d2ub05 thru d2ub100 single phase 2.0 amps.glass pa ssivated bridge rectifiers voltage range 50 to 1000 volts current 2.0 amperes package:d3k features ideal for printed circuit boards reliable low cost construction technique results in inexpensive product high temperature soldering guaranteed: 260 /10 seconds mechanical data case: molded plastic lead: solder plated polarity: as marked on body mounting torque: 0.8nm recommended torque: 0.5nm maximum ratings and elec trical characteristics rating at 25 ambient temperature unless otherwise specified. single phase, half wave, 60 hz, resistive or inducti ve load. for capacitive load, derate current by 20% type number d2ub 05 d2ub 10 d2ub 20 d2ub 40 d2ub 60 d2ub 80 d2ub 100 units maximum repetitive peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward t c = 100 rectified current at t a = 40 i f(av) 2.0 (1) 1.0 (2) a peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load (jedec method) i fsm 35 a maximum instantaneous forward voltage @ 2a v f 1.1 v rating for fusing (3ms t<8.3ms) tj=25 i 2 t 3.5 a 2 sec maximum dc reverse current @ t a =25 rated dc blocking voltage per leg t a = 125 i r 5.0 500 a typical thermal resistance (note) r ja r jc 40 3.5 /w operating temperature range t j -55 to +150 storage temperature range t stg -55 to +150 note 1.unit case mounted on 1.6*1.6*0.06? thick (5.1*5.1*0.15cm) al.plate 2.unit mounted on p.c.b. with 0.5*0.5? (12.7*1.27mm) copper pads and 0.375? (9.5mm) lead length
website: www.kingtronics.com email: info@kingtronics.com tel: (852) 8106 7033 fax: (852) 8106 7099 2 d2ub05 thru d2ub100 rating and characteristic curves d2ub05 thru d2ub100 fig. 1-maximum nono-repetitive forward surge current per bridge elelment fig. 2-maximum forward current derating curve ambient temperature.( ) number of cycles at 60hz fig. 4-typical reverse chara cteristics per bridge element fig. 3-typical instantaneous forward characteristics per bridge element instantaneous forward voltage.(v) percent of rated peak reverse voltage.(%) note: specifications are subject to change without notice.
|
