View CLAA089NA0ACW_7781147.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

c c h h u u n n g g h h w w a a p p i i c c t t u u r r e e t t u u b b e e s s , , l l t t d d . . p p r r o o d d u u c c t t s s p p e e c c i i f f i i c c a a t t i i o o n n to : studio technology co.,ltd date : 2009/02/23 acc epted by : approved by checked by prepared by ronald huang roger liu carol shen prepared by : product planning management division chunghwa picture tubes, ltd. 1127 hopin rd., padeh, t aoy uan, t aiw an 334, r.o.c. tel: +886-3-3675151 fax: +886-3-377-3003 doc.no: claa089na 0 acw-haosheng-v1-20090223 issue date: 20090223 tft lcd CLAA089NA0ACW studio technology co.,ltd www.yslcd.com.tw www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa picture tubes, ltd., cpt confidential 2/18 CLAA089NA0ACW- studio -v1-20090223 revision status revision notice description page rev. date v1 first revision -- 20090211 studio technology co.,ltd www.yslcd.com.tw www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa picture tubes, ltd., cpt confidential 3/18 CLAA089NA0ACW- studio -v1-20090223 contents 1. overview....................................................................................................................... 4 2. absolute maximum ratings ................................................................................... 5 3. electrical cha racteris tics................................................................................. 6 4. interface connection:............................................................................................ 8 5. input signal ............................................................................................................... 1 0 6. block di agram.......................................................................................................... 12 7. mechanical di mension ........................................................................................... 13 8. optical chara cteristics...................................................................................... 15 9. reliability t est conditions................................................................................. 18 studio technology co.,ltd www.yslcd.com.tw www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa picture tubes, ltd., cpt confidential 4/18 CLAA089NA0ACW- studio -v1-20090223 1. overview CLAA089NA0ACW is 8.9" color tft-lcd (thin film transistor liquid crystal display) module composed of lcd panel, driver ics, control circuit and led backlight. the 8.9" screen produces 1024 rgb x600 resolution image. by applying 6 bits digital data, 262k color images are displayed. the lcd is drivered by a single input voltage (3.3 v and 5v). general specifications are summarized in the following table: item secification display area (mm) 195.072 (h) 114.3 (v) number of pixels(dot) 1024(h) 3(rgb) 600(v) pixel pitch (mm) 0.1905 (h) 0.1905 (v) color pixel arrangement rgb vertical stripe display mode normally white,tn number of color 262,144 viewing direction 6 o'clock response time (tr+tf) 20 ms (typ.) brightness(cd/ O ) 220 nit (typ.) viewing angle (cr R 10) 140 degree (horizontal) 120 degree (vertical) electrical interface lvds power consumption(w) 2.9 w (typ.) outline dimension(mm) 210(w) 127.8(h) 5.2(d) module weight(g) 190(typ.) bl unit led surface treatment anti-glare, surface hardness: 3h studio technology co.,ltd www.yslcd.com.tw www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa picture tubes, ltd., cpt confidential 5/18 CLAA089NA0ACW- studio -v1-20090223 2. absolute maximum ratings item symbol min. max. unit note power supply voltage for lcd vcc -0.3 4.0 v power supply voltage for led vdd -0.3 6.0 v signal input voltage rxin0+ ~ rxin2+ rxin0- ~ rxin2- rx clk in +/- -0.3 vcc + 0.3 v vesdc -200 +200 v static electricity vesdm -15k +15k v note2 icc rush current irush - 1 a note3 operation temperature t op -20 70 note1 storage temperature t stg -30 80 note1 note note 1 if users use the product out off the environmemtal operation range (temperature and humidity), it will have visual quality concerns. note 2 test condition: iec 61000-4-2 vesdc contact discharge to input connector vesdm discontact discharge to module note 3 the input pulse-current measurement system is as below: control signal: high (+3.3v) ? low (gnd) supply voltage of rising time should be from r3 and c2 tune to 550 s. vcc ( lcd 12v 3.3v c1 1uf r1 47k q1 q2 r2 1k c2 10000pf r3 47k c3 1uf crl risin g time vcc 0.9vin 0.1vin gnd 550s studio technology co.,ltd www.yslcd.com.tw www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa picture tubes, ltd., cpt confidential 6/18 CLAA089NA0ACW- studio -v1-20090223 3. electrical characteristics 3.1 tft-lcd power supply voltage (ta=25 ) item symbol min. typ. max. unit note power supply voltage for lcd vcc 3.0 3.3 3.6 v power supply voltage for led vled 4.5 5 5.5 v vin 0 - 2.4 v vcm 0.3 1.2 2.1 v note1 vid 0.1 - 0.6 v note1 vth - - 100 mv note1 logic input voltage vtl -100 - - mv note1 vih 3.0 3.3 v adj input voltage vil gnd 0.3 v note note1 lvds signal note: vcm: common mode voltage offset vid : differential input voltage vth: differential input high threshold voltage vtl: differential input low threshold voltage studio technology co.,ltd www.yslcd.com.tw www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa picture tubes, ltd., cpt confidential 7/18 CLAA089NA0ACW- studio -v1-20090223 3.2 tft-lcd current consumption item symbol min. typ. max. unit note lcd power current icc -- 240 300 ma note1 led power current idd -- 420 480 ma note2 note note1 typical: under 64 gray pattern maximum: under black pattern (a) 64 gray pattern (b) black pattern note2 typical: vdd = 5v maximum: vdd = 4.5v 3.3 power and signal sequence 0.5 t1 Q 10ms 200ms Q t5 0 t2 Q 50ms 200ms Q t6 0 t3 Q 50ms 200ms Q t7 0 t4 Q 10ms 10ms Qt8 10ms Qt9 studio technology co.,ltd www.yslcd.com.tw www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa picture tubes, ltd., cpt confidential 8/18 CLAA089NA0ACW- studio -v1-20090223 4. interface connection: 4.1 pin assignment pin no. symbol description 1 avss power ground 2 vcc power supply for digital circuit 3 vcc power supply for digital circuit 4 vedid 3.3v 5 adj brightness control for led b/l 6 clkedid edid clock signal 7 dataedid edid data signal 8 rxin0- negative lvds differential data inputs 9 rxin0+ positive lvds differential data inputs 10 avss power ground 11 rxin1- negative lvds differential data inputs 12 rxin1+ positive lvds differential data inputs 13 avss power ground 14 rxin2- negative lvds differential data inputs 15 rxin2+ positive lvds differential data inputs 16 avss power ground 17 rxclk- negative lvds differential clock inputs 18 rxclk+ positive lvds differential clock inputs 19 avss power ground 20 nc nc 21 nc nc 22 avss power ground 23 avss power ground 24 vled power supply for led(vled=5.00.5) 25 vled power supply for led(vled=5.00.5) 26 vled power supply for led(vled=5.00.5) 27 nc nc 28 nc nc 29 nc nc 30 nc nc [note]: 1) to reserve nc pin, don?t make it connect with gnd or any other signal. 2) avss pin must be connected with gnd. don?t let it be an empty pin. 3) adjust control pin (adj) controls brightness. the bigger pulse duty, the brighter luminance. studio technology co.,ltd www.yslcd.com.tw www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa picture tubes, ltd., cpt confidential 9/18 CLAA089NA0ACW- studio -v1-20090223 4) adj signal=0~3.3v, operation frequency: 25khz5khz 5) the adj should pull-high if not adjust brightness, this pin can?t floating. f=25khz 5khz t=0.04ms studio technology co.,ltd www.yslcd.com.tw www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa picture tubes, ltd., cpt confidential 10/18 CLAA089NA0ACW- studio -v1-20090223 5. input signal 5.1 timing specification item symbol min. typ. max. unit lvds clk frequency fclkin 39.05 45 51.42 mhz horizontal period t h 1160 1200 1240 tclk horizontal valid t ha 1024 1024 1024 tclk horizontal horizontal blank t hb 136 176 216 tclk frame fv 55 60 65 hz vertical period t v 612 625 638 t h vertical valid t va 600 600 600 t h lcd input timing dena vertical vertical blank t vb 12 25 38 t h 5.2 timing chart (1) input timing diagram horizontal timing: vertical timing: studio technology co.,ltd www.yslcd.com.tw www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa picture tubes, ltd., cpt confidential 11/18 CLAA089NA0ACW- studio -v1-20090223 (2) lvds input data mapping note: r/g/b[7] are msb and r/g/b[0] are lsb. studio technology co.,ltd www.yslcd.com.tw www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa picture tubes, ltd., cpt confidential 12/18 CLAA089NA0ACW- studio -v1-20090223 6. block diagram studio technology co.,ltd www.yslcd.com.tw www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa picture tubes, ltd., cpt confidential 13/18 CLAA089NA0ACW- studio -v1-20090223 7. mechanical dimension 7.1 front side [note]: tolerance is 0.3mm unless noted studio technology co.,ltd www.yslcd.com.tw www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa picture tubes, ltd., cpt confidential 14/18 CLAA089NA0ACW- studio -v1-20090223 7.2 rear side [note]: 1. tolerance is 0.3mm unless noted 2. cn1: starconn 093f30 3. side mount m2 screw torque max. 2.5 kgf*cm 4. side mount m2 screw length max. 2.0 mm studio technology co.,ltd www.yslcd.com.tw www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa picture tubes, ltd., cpt confidential 15/18 CLAA089NA0ACW- studio -v1-20090223 8. optical characteristics item symbol condition min. typ. max. unit remarks constrast ratio cr point-5 ? 300 400 - - *1)*2)*3) luminance lw point-5 ? 180 220 cd/m 2 *1)*3) luminance uniformity ? l 70 80 - % *1)*3) response time (white - black) tr+ tf point-5 ? - 20 35 ms *1)*3)*5) horizontal 120 140 - *1)*2)*4) viewing angle vertical cr 10 R point-5 100 120 - *1)*2)*4) white wx wy 0.273 0.289 0.313 0.329 0.353 0.369 red rx ry 0.554 0.297 0.594 0.337 0.634 0.377 green gx gy 0.299 0.548 0.339 0.588 0.379 0.628 color coordinate blue bx by point-5 0.108 0.055 0.148 0.095 0.188 0.135 - *1)*3) [note]: *1)measurment condition: 25 2 , 60%10%rh, under 10 lux in the dark room. measuring with bm-5a (topcon) under viewing angle 2, v cc =3.3v, vadj=3.3v, duty 100%, after lighting 10 mins. *2) definition of contrast ratio: contrast ratio (cr) = (white) luminance of on / (black) luminance of off l=500mm 2 bm-5a studio technology co.,ltd www.yslcd.com.tw www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa picture tubes, ltd., cpt confidential 16/18 CLAA089NA0ACW- studio -v1-20090223 *3) definition of luminance: measuring white luminance on the point 5 as figure 8-1 definition of luminance uniformity: measuring white luminance on the point1 to 9 as figure 8-1 l = [l(min)/l(max)]100% fig. 8-1 measuring point *4) definition of viewing angle( , ): fig. 8-2 definition of viewing angle studio technology co.,ltd www.yslcd.com.tw www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa picture tubes, ltd., cpt confidential 17/18 CLAA089NA0ACW- studio -v1-20090223 *5) definition of response time the response time is defined as the time interval between the 10% and 90% amplitudes. refer to the figure 8-3 as below. luminance 90% 90% 10% t f t r white(63 th ) black(0) 10% fig. 8-3 definition of response time studio technology co.,ltd www.yslcd.com.tw www.datasheet.net/ datasheet pdf - http://www..co.kr/
cpt chunghwa picture tubes, ltd., cpt confidential 18/18 CLAA089NA0ACW- studio -v1-20090223 9. reliability test conditions 9.1 temperature and humidity test items conditions high temperature operation 70 ? 240 hrs high temperature storage 80 ? 240 hrs high temperature high humidity operation 60 ?90 rh 240 hrs (no condensation) low temperature operation -20 ? 240hrs low temperature storage -30 ? 240 hrs thermal shock -30 (0.5hr) 80 (0.5hr) 200 cycle 9.2 shock & vibration test items conditions shock (non-operation) z shock level: 980m/s 2 (equal to 100g). z waveform: half sinusoidal wave, 6ms. z number of shocks: one shock input in each direction of three mutually perpendicular axes for a total of three shock inputs. vibration (non-operation) z frequency range:8~33.3hz z stroke 1.3 mm z vibration: sinusoidal wave, perpendicular axis (both x,z axis: 2hrs , and y axis: 4hrs ). z sweep: 2.9g,33.3 hz -400 hz z cycle: 15 min 9.3. esd test item condition note 150pf 330 8kv&15kv air test note1 esd 200pf 0 200v contact test note2 [note] note1 lcd glass and metal bezel note2 if connector pins 9.4 judgment standard the judgment of the above test should be made as follow: pass: normal display image with no obvious non-uniformity and no line defect. partial transformation of the module parts should be ignored. fail: no display image, obvious non-uniformity, or line defects. studio technology co.,ltd www.yslcd.com.tw www.datasheet.net/ datasheet pdf - http://www..co.kr/

▲Up To Search▲

Price & Availability of CLAA089NA0ACW

	To Download CLAA089NA0ACW Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .