864 mhz saw filter 3 mhz bandwidth part number: SF0864BA02511S spectrum microwave, inc. 400 nickerson road, marlborough, ma 01752, usa phone 508-251-6400 fax 508-251-6401 www.spectrummicrowave.com dsSF0864BA02511S rev x2 24jan11 page 1 of 3 description 864 mhz saw filter with 12 mhz bandwidth for low pow er wireless communications. 3 x 3 mm ceramic lcc, 6 pads. rohs compliant. typical performance
864 mhz saw filter 3 mhz bandwidth part number: SF0864BA02511S spectrum microwave, inc. 400 nickerson road, marlborough, ma 01752, usa phone 508-251-6400 fax 508-251-6401 www.spectrummicrowave.com dsSF0864BA02511S rev x2 24jan11 page 2 of 3 specification parameter min typ max units center frequency (fc) 1 864 mhz insertion loss (862.5 to 865.5 mhz) 4 6 db passband ripple (862.5 to 865.5 mhz) 1.5 2.5 db bandwidth (2.5 db) 3 10 mhz rejection (841.6843.6 mhz) 2 40 44 db rejection (852.3853.3 mhz) 2 30 38 db ambient temperature 25 c system source and load impedance 50/0 w /pf notes: 1. average of lower & upper 3 db frequencie s. 2. referenced to the insertion loss. maximum ratings parameter min max units storage temperature range 40 85 ?c operating temperature range 30 80 ?c input power level 0 dbm dc permissive voltage 10 v dc matching circuit notes: 1. external matching components are not required. 2 5 1,3,4,6 input 50 w singleended output 50 w singleended gnd gnd
864 mhz saw filter 3 mhz bandwidth part number: SF0864BA02511S spectrum microwave, inc. 400 nickerson road, marlborough, ma 01752, usa phone 508-251-6400 fax 508-251-6401 www.spectrummicrowave.com dsSF0864BA02511S rev x2 24jan11 page 3 of 3 package outline suggested footprint marking all specifications are believed to be accurate and reliable. however, spectrum microwave reserves the right to make changes without notice. ? 2011 all rights reserved. units: mm typical tolerances are 0.15 mm except where indicated. pad configuration: input: 2 output: 5 ground: all other pads package material: body: al 2 o 3 ceramic lid: kovar, ni plated terminations: au plating 1 m min, over a 1.38.9 m ni plating smi 2511 yyww iso 9001 registered
|