www.rfm.com e-mail: info@rfm.com page 1 of 6 ?2009-2010 by rf monolithics, inc. SF2160E - 7/19/10 electrical characteristics electrical connections characteristic sym notes min typ max units center frequency f c 2330 mhz insertion loss 2300 to 2360 mhz il 2.4 3.2 db amplitude ripple: 2300 to 2360 mhz 1.1 2 db 2300 to 2320 mhz 0.3 1 2320 to 2340 mhz 0.6 1 2340 to 2360 mhz 0.5 1 return loss 2300 to 2360 mhz 9 9.5 db attenuation referenced to 0 db: dc to 2085 mhz 25 30 db 2097 to 2235 mhz 25 36 2235 to 2256 mhz 15 29 case style sm3030-6 3 x 3 x 1.4 mm surface-mount lid symbolization, y=year, ww=week, s=shift, see note 4 826 // ywws connection terminals input 2 output 5 ground all others sm3030-6 ? rf saw filter, 2330 mhz, 60 mhz bw 3.0 x 3.0 x 1.4 mm surface-mount case complies with directive 2002/95/ec (rohs) absolute maximum ratings rating value units input power +10 dbm dc voltage on any non-ground terminal 3 v operating temperature range -40 to +85 c component storage temperature range -50 to +95 c storage temperature range in tape and reel -40 to +85 c maximum soldering profile, 5 cycles/10 seconds maximum 265 c 2330 mhz saw filter SF2160E 1. unless noted otherwise, all specifications apply over the operating temper- ature range with filter soldered to the specified demonstration board with impedance matching to 50 ? and measured with 50 ? network analyzer. 2. unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. rejection is measured as attenuation below the minimum il point in the passband. rejection in final user application is dependent on pcb layout and external impedance matching design. see application note no. 42 for details. 4. "lrip" or "l" after the part number indicates "low rate initial production" and "eng" or "e" indicates "engineering prototypes." 5. the design, manufacturing process, and specifications of this filter are subject to change. 6. either port 1 or port 2 may be used for either input or output in the design. however, impedances and impedance matching may vary between port 1 and port 2, so that the filter must always be installed in one direction per the circuit design. 7. us and international patents may apply. 8. rfm, stylized rfm logo, and rf monolithics, inc., are registered trademarks of rf monolithics, inc. pb caution: electrostatic sensitive device. observe precautions for handling. notes:
www.rfm.com e-mail: info@rfm.com page 2 of 6 ?2009-2010 by rf monolithics, inc. SF2160E - 7/19/10 testing environment frequency response
www.rfm.com e-mail: info@rfm.com page 3 of 6 ?2009-2010 by rf monolithics, inc. SF2160E - 7/19/10
www.rfm.com e-mail: info@rfm.com page 4 of 6 ?2009-2010 by rf monolithics, inc. SF2160E - 7/19/10
www.rfm.com e-mail: info@rfm.com page 5 of 6 ?2009-2010 by rf monolithics, inc. SF2160E - 7/19/10 sm3030-6 case top view bottom view 1 2 3 6 5 4 1 2 3 6 5 4 a bc d j ef gh i 6-terminal ceramic surface-mount case 3.0 x 3.0 mm nominal footprint case and pcb footprint dimensions case materials dimension mm inches min nom max min nom max a 2.87 3.00 3.13 0.113 0.118 0.123 b 2.87 3.00 3.13 0.113 0.118 0.123 c 1.12 1.25 1.38 0.044 0.049 0.054 d 0.77 0.90 1.03 0.030 0.035 0.040 e 2.67 2.80 2.93 0.105 0.110 0.115 f 1.47 1.60 1.73 0.058 0.063 0.068 g 0.72 0.85 0.98 0.028 0.033 0.038 h 1.37 1.50 1.63 0.054 0.059 0.064 i 0.47 0.60 0.73 0.019 0.024 0.029 j 1.17 1.30 1.43 0.046 0.051 0.056 k 3.20 0.126 l 1.70 0.067 m 1.05 0.041 n 0.81 0.032 o 0.38 0.015 materials solder pad plating 0.3 to 1.0 m gold over 1.27 to 8.89 m nickel lid plating 2.0 to 3.0 m nickel body al 2 o 3 ceramic pb free pcb footprint top view
www.rfm.com e-mail: info@rfm.com page 6 of 6 ?2009-2010 by rf monolithics, inc. SF2160E - 7/19/10 tape and reel specifications ?b? quantity per reel inches millimeters 7 178 500 13 330 3000 see detail "a" 1 3 . 0 2 0 . 2 2.0 12.0 1 0 0 r e f . " b " r e f . component orientation and dimensions carrier tape dimensions ao 3.35 mm bo 3.35 mm ko 1.40 mm pitch 8.0 mm w 12.0 mm ro.3 (max.) ko section a-a 0.3 0.05 section b-b bo 2.0 4.0 ao pitch bb a r0.5 (max.) a 5 . 5 1 2 . 0 1 . 7 5 1.5 1.50 pin #1 user direction of feed
|
