oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 813-sl70.0m-19a 70.0 mhz if saw filter 18.44 mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response o smith chart o wide band notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 813-sl70.0m-19a january 2011 rev a 70.0 mhz if saw filter 18.44 mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description a, b, c, d, f, g, h, i, j, l ground k input e output test fixture & values input l1=100 nh, c1=68 pf output l2=4.7 nh, l2=82 nh source/load impedance 50 ?
oscilent part number 813-sl70.0m-19a january 2011 rev a 70.0 mhz if saw filter 18.44 mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c - 25 - storage temperature range c -40 - 85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz - 70.0 - insertion loss at fo db - 12.8 15.0 group delay variation (fo9.22mhz) nsec - 50 100 absolute delay at fo usec - 1.16 - temperature coefficient ppm/c - -86 - passband ripple (fo9.22mhz) db - 0.50 1.00 bandwidth at -1db mhz 19.00 19.30 - bandwidth at -3db mhz - 19.95 - bandwidth at -40db mhz - 22.95 23.20 relative attenuation fo +10.8mhz db 15 18 - fo -10.8mhz db 15 16 - ultimate rejection db 40 45
oscilent part number 813-sl70.0m-19a january 2011 rev a 70.0 mhz if saw filter 18.44 mhz bandwidth product specification p. 3 www.oscilent.com frequency response bandwidth at ?1.0 db bandwidth at ?3.0 db bandwidth at ?40.0 db relative attenuation fo +10.8mhz
oscilent part number 813-sl70.0m-19a january 2011 rev a 70.0 mhz if saw filter 18.44 mhz bandwidth product specification p. 4 www.oscilent.com ripple variation fo9.22mhz group delay variation fo9.22mhz smith chart
oscilent part number 813-sl70.0m-19a january 2011 rev a 70.0 mhz if saw filter 18.44 mhz bandwidth product specification p. 5 www.oscilent.com wide band
|