oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 813-if140.0m-141a 140mhz if saw filter 15.0mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 813-if140.0m-141a january 2011 rev a 140mhz if saw filter 15.0mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description a, b, c, d, f, g, h, i, j, l ground k input e output test fixture & values input l1=68 nh, l2=47 nh output l3=82 nh, l4=47 nh source/load impedance 50 ?
oscilent part number 813-if140.0m-141a january 2011 rev a 140mhz if saw filter 15.0mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c -30 - +80 storage temperature range c -40 - +85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz - 140.0 - insertion loss at fo db - 18.0 21.0 amplitude ripple variation (fo 6.875 mhz) db p-p - 0.6 1.0 group delay variation (fo 6.875 mhz) nsec - 50 100 absolute delay at fo sec - 0.88 - temperature coefficient ppm/c - -23 - bandwidth at ?1.0 db mhz - 14.8 - bandwidth at ?3.0 db mhz 15.0 15.5 - bandwidth at ?40.0 db mhz - 18.5 19.0 relative attenuation lower sidelobe db 42 48 - upper sidelobe db 40 45 - fc-8.5mhz db - 15 - fc+8.5mhz db - 9 -
oscilent part number 813-if140.0m-141a january 2011 rev a 140mhz if saw filter 15.0mhz bandwidth product specification p. 3 www.oscilent.com frequency response ripple (fo 6.875mhz) group delay (fo 6.875mhz)
oscilent part number 813-if140.0m-141a january 2011 rev a 140mhz if saw filter 15.0mhz bandwidth product specification p. 4 www.oscilent.com relative attenuation (fo 8.5mhz)
|