page 1 of 3 features high effciency up to 86 % operating temperature range C40c to +71c indefnite short-circuit protection i/o isolation 1500 vdc industry standard pinout cost optimized design lead free design, rohs compliant 3-year product warranty the tel 15 series is a range of dc/dc-converter modules with wide input range of 2:1. state of the art smd-technology guarantees a product with very high reliability and good cost /performance ratio. high effciency allows an operating temperature range of C40c to +71c at full load. this product serie provides an economical solution for many cost critical applications in industrial and consumer electronics. dc/dc converters tel 15 series, 15 watt ordercode input voltage range output voltage output current max. effciency typ. tel 15-1210 3.3 vdc 3000 ma 78 % tel 15-1211 5.1 vdc 3000 ma 81 % tel 15-1212 9 C 18 vdc 12 vdc 1250 ma 86 % tel 15-1213 (nominal 12 vdc) 15 vdc 1000 ma 86 % tel 15-1222 12 vdc 625 ma 86 % tel 15-1223 15 vdc 500 ma 86 % tel 15-2410 3.3 vdc 3000 ma 78 % tel 15-2411 5.1 vdc 3000 ma 81 % tel 15-2412 18 C 36 vdc 12 vdc 1250 ma 86 % tel 15-2413 (nominal 24 vdc) 15 vdc 1000 ma 86 % tel 15-2422 12 vdc 625 ma 86 % tel 15-2423 15 vdc 500 ma 86 % tel 15-4810 3.3 vdc 3000 ma 78 % tel 15-4811 5.1 vdc 3000 ma 81 % tel 15-4812 36 C 75 vdc 12 vdc 1250 ma 86 % tel 15-4813 (nominal 48 vdc) 15 vdc 1000 ma 86 % tel 15-4822 12 vdc 625 ma 86 % tel 15-4823 15 vdc 500 ma 86 % models c b scheme u l 60950 -1 http://www.tracopower.com
page 2 of 3 input specifications input current no load 12 vin models: 30 ma typ. 24 vin models: 20 ma typ. 48 vin models: 10 ma typ. input current (full load) 12 vin; 3.3 vout models: 1050 ma typ. 12 vin; other output models: 1500 ma typ. 24 vin; 3.3 vout models: 550 ma typ. 24 vin; other output models: 750 ma typ. 48 vin; 3.3 vout models: 250 ma typ. 48 vin; other output models: 350 ma typ. start-up voltage / under voltage shut down 12 vin models: 8.5 vdc / 8.0 vdc typ. 24 vin models: 17 vdc / 15 vdc typ. 48 vin models: 33 vdc / 29 vdc typ. surge voltage 12 vin models: 25 v max. (100 msec. max.) 24 vin models: 50 v max. 48 vin models: 100 v max. output specifications voltage set accuracy 1 % regulation C input variation vin min. to vin max. 1 % max. C load variation 10 C 100 % single output models : 0.5 % max. dual output models balanced load: 1 % max. dual output models unbalanced load : 3 % max. ripple and noise (20 mhz bandwidth) single output models: 50 mvpk-pk max. dual output models: 75 mvpk-pk max temperature coefficient 0.02 %/k output current limitation >120 % of iout max., constant current short circuit protection indefinite (automatic recovery) capacitive load single output models: 470 f max. dual output models: 220 f max. (per output) general specifications temperature ranges C operating C40c to +71c (without load derating) C case temperature +100c max. C storage C55c to +125c humidity (non condensing) 95 % rel h max. reliability, calculated mtbf (mil-hdbk-217f, at +25c, ground benign) >700000 h isolation voltage (60 sec.) C input/output 1500 vdc isolation capacitance C input/output 1200 pf typ. isolation resistance C input/output (500 vdc) >1000 m ohm switching frequency (fixed) 330 khz typ. (pulse width modulation pwm) safety standards ul/cul 60950-1, iec/en 60950-1 (compliance up to 60 vdc input voltage (selv limit) safety approval csa 60950-1-03 (file no. 226037) www.tracopower.com/products/tel15-csa.pdf environmental compliance C reach www.tracopower.com/products/tel15-reach.pdf C rohs rohs directive 2011/65/ec dc/dc converters tel 15 series 15 watt http://www.tracopower.com all specifcations valid at nominal input voltage, full load and +25c after warm-up time unless otherwise stated.
page 3 of 3 physical specifications casing material copper nickel plated baseplate non conductive fr4 potting material epoxy (ul 94v-0 rated) weight 32 g (1.13 o z ) soldering temperature max. 265c / 10 sec. outline dimensions 5.08 10 .16 20.32 25.4 10.2 6.0 50.8 1 5.2 20.32 insulated baseplate (2.0) (0.8) (0.6) (0.2) (0.4) (0.4) (0.8) (1.0) 2.5 (0.1) (0.40) (0.24) bottom v iew 1 4 3 2 5 10 .16 10.2 (0.4) pin single dual 1 +vin (vcc) +vin (vcc) 2 Cvin (gnd) Cvin (gnd) 3 +vout +vout 4 no pin common 5 Cvout Cvout pin-out dimensions in [mm], () = inch pin diameter: 1.0 0.05 (0.02 0.002) pin pitch tolerances: 0.13 (0.005) case tolerances: 0.25 (0.01) rev. february 21.2014 dc/dc converters tel 15 series 15 watt note: before attaching the heatsink, the product label on converter has to be removed for optimal performance. for volume orders we can supply the converters with heatsink already mounted. please contact us for a relative quotation. order code: ten-hs4 (cont.: heat-sink, thermal pad, 2 clamps) material: aluminum finish: anodic treatment (black) weight: 9 g (0.31oz) without converter thermal impedance after assembling: 10 k/w 18.0 (0.71) max. conver ter heat-sink thermal pad clamp 31.0 (1.22) max. 23.0 (0.91) heat-sink ten-hs4 (optional) heat-sink (option) sp ec i?cati ons can be changed wi thout noti ce! make sure you are using the latest documentation, downloadable at www.tracopower. com www .tracopower. com
|
