unisonic technologies co., ltd SD106WS schottky diode www.unisonic.com.tw 1 of 3 copyright ? 2005 unisonic technologies co., ltd qw-r601-010,a schottky diodes features * low turn-on voltage vd * built ?in pn junction guard ring sod-123 sod-323 + - + - *pb-free plating product number: SD106WSl ordering information order number normal lead free plating package packing SD106WS-ca2-r SD106WSl-ca2-r sod-123 tape reel SD106WS-cb2-r SD106WSl-cb2-r sod-323 tape reel SD106WSl-ca2-r (1)packing type (2)package type (3)lead plating (1) r: tape reel (2) ca2: sod-123, cb2: sod-323 (3) l: lead free plating, blank: pb/sn marking s 2 lead plating
SD106WS diode unisonic technologies co., ltd 2 of 3 www.unisonic.com.tw qw-r601-010,a absolute maximum ratings (single diode @t a =25
) parameter symbol ratings unit maximum non-repetitive peak reverse voltage v rm 30 v peak forward current i fm 200 ma non-repetitive peak forw ard surge current @ t p =10ms i fsm 1 a power dissipation p d 250 mw junction temperature t j 150 storage temperature t stg -65~+150 note: absolute maximum ratings are those values beyond which the device c ould be permanently damaged. absolute maximum ratings are stress ratings onl y and functional device oper ation is not implied. thermal data parameter symbol ratings unit thermal resistance junction to ambient ja 500 /w
electrical characteristics (t a =25
) parameter symbol conditions min typ max unit i f =2ma 260 mv i f =15ma 320 mv i f =100ma 420 mv forward voltage v f i f =200ma 490 550 mv reverse breakdown voltage bv r i r =100a 30 v peak reverse leakage current i r v r =30v 5 a typical junction capacitance c t v r =10v, f=1mhz 50 15 pf
SD106WS diode unisonic technologies co., ltd 3 of 3 www.unisonic.com.tw qw-r601-010,a typical characteristics 0 0. 01 0. 1 1 100 1000 i f (ma) 0.8 v f (v) 0 0.1 i r ( 0 a) 10 25 30 v r (v ) 10000 10 100 0.4 15 forward characteristics reverse characteristics 10 0.5 0.6 0.7 0.3 0.2 0.1 t j = -40 t j = 125 20 5 1 1000 t j = 50 t j = 25 t j = 75 t j = 100 t j = 125 t j = 25 c t (pf) v r (v) capacitance c in vs. reverse voltage v r 0 1 50 30 20 10 25 15 10 5 utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in lif e support appliances, devices or systems where malfunction of these products can be reasonably expe cted to result in personal injury. reproduction in whole or in part is prohibited without the prior writ ten consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
