www.gowanda.com one magnetics pkwy, gowanda, ny 14070 ? (t) 716-532-2234 ? (f) 716-532-2702 ? sales@gowanda.com 45 power inductors - surface mount smp3013 power inductors part l h 10% dcr saturation current* current rating** number @1 khz max dc amps dc amps smp3013-101k 1.0 .030 4.6 2.78 smp3013-121k 1.2 .046 4.2 2.69 smp3013-151k 1.5 .056 3.6 2.03 smp3013-181k 1.8 .061 3.4 1.95 smp3013-221k 2.2 .083 3.0 1.69 smp3013-271k 2.7 .096 2.6 1.55 smp3013-331k 3.3 .109 2.4 1.46 smp3013-391k 3.9 .120 2.2 1.39 smp3013-471k 4.7 .131 2.0 1.33 smp3013-561k 5.6 .194 1.8 1.10 smp3013-681k 6.8 .198 1.6 1.08 smp3013-821k 8.2 .221 1.5 1.02 smp3013-102k 10 .258 1.4 .946 smp3013-122k 12 .278 1.2 .912 smp3013-152k 15 .314 1.1 .858 smp3013-182k 18 .346 1.0 .817 smp3013-222k 22 .480 .980 .694 smp3013-272k 27 .535 .860 .657 smp3013-332k 33 .715 .780 .568 smp3013-392k 39 .970 .680 .488 smp3013-472k 47 1.06 .660 .467 smp3013-562k 56 1.18 .580 .442 smp3013-682k 68 1.57 .520 .384 smp3013-822k 82 1.76 .470 .362 smp3013-103k 100 1.92 .450 .347 smp3013-123k 120 2.16 .400 .327 smp3013-153k 150 3.12 .360 .272 smp3013-183k 180 3.38 .330 .261 smp3013-223k 220 4.66 .290 .223 smp3013-273k 270 6.36 .270 .191 smp3013-333k 330 7.20 .235 .179 smp3013-393k 390 7.92 .210 .171 SMP3013-473K 470 8.90 .200 .161 smp3013-563k 560 12.1 .185 .138 smp3013-683k 680 13.7 .170 .130 smp3013-823k 820 18.2 .150 .113 smp3013-104k 1000 20.9 .130 .105 n otes: ? operating temperature -55c to +125c ? core material is high resistance nickel zinc ferrite *saturation current is the approximate value that will reduce the initial inductance by 5% **rated current is based on a 40c temperature rise at an ambient temperature of 85c. tape and reel specs: pcs./reel maximum: 2200 pitch between parts: 8 mm tape width: 16 mm reel diameter inches: 13 .125/.145 (3.18/3.68) over terminal .040/.060 (1.02/1.52) wide x .020 (.508) min. deep 2 sides marking: pxxxk .070 ref . (1.78) .1 10/.130 (2.79/3.30) .300/.325 (7.62/8.26) over terminal recommended foot print .075 (1.91) .310 centers (7.87) .100 (2.54) in. (mm) power inductors - surface mount
|