power entry modules with line filter grf4 www.schurter.com/pg0 6 emc products iec appliance inlet c14 with filter, "lock and shield" mounting grf4: with shield and line filter standard- or medical-filter c14 70 c description - panel mount: snap-in version from rear-side - 3 functions: appliance inlet protection class i, with emc-shield, line filter in stan - dard and medical version approvals - vde certificate number: 102348 - ul file number: e72928 - csa file number: 701867 characteristics - time saving lock and shield snap-in design for rear-panel mounting - all single elements are already wired - innovative emc-shielding with flexible steel segments for an excellent contact to the panel - qualified for use in equipment according iec/en 60950 other versions on request - panel thickness 1.2 mm and 2.0 mm references alternative: version without line filter grf 2 weblinks pd f , general product informatio n , approval s , roh s , china-roh s , mating connector s , e-stor e , schurter-stock-chec k , distributor- stock-chec k , accessorie s technical data ratings iec 0.5 - 10 a @ ta 40 c / 250 vac; 50 hz ratings ul/csa 0.5 - 15 a @ ta 40 c / 125 vac; 60 hz leakage current standard < 0.5 ma (250 v / 60 hz) medical < 5 a (250 v / 60 hz) dielectric strength > 1.7 kvdc between l-n > 2.7 kvdc between l/n-pe test voltage (2 sec) allowable operation temp. -25 c to 85 c climatic category 25/085/21 acc. to iec 60068-1 degree of protection from front side ip 40 acc. to iec 60529 protection class suitable for appliances with protection class 1 acc. to iec 61140 terminal quick connect terminals 4.8 x 0.8 mm panel thickness s snap-in: 1.5 mm (other on request) material: housing thermoplastic, black, ul 94v-0 appliance-inlet/-outlet c14 acc. to iec/en 60320-1, ul 498, csa c22.2 no. 42 (for cold conditions) pin-temperature 70 c, 10 a, protection class 1 line filter standard and medical version, iec 60939, iec 60601-1, ul 1283, ul 544, en 133 200, csa c22.2 no. 8 technical detail s mtbf > 3'300'000 h acc. to mil-hb-217 f dimensions grf4 s 24.2 4.8 22.6 m4 +0.2 0.1 1) 0.3 6.13 4.8x0.8 1) 30.25 25.2 28.3 59.3 24.3 31.4 1) terminal for earth screw m4 30.5 20.8 m4 0.1 0.1 max. r1.5 22.9 this area must be conductive for optimal shielding. do not apply paint or coatings.
power entry modules with line filter grf4 www.schurter.com/pg0 6 emc products technical data of filter-components rated current [a] filter-type inductances l [mh] capacitance cx [nf] capacitance cy [nf] r [m ? ] 0.5 standard version 2 x 24 100 2.2 - 1 standard version 2 x 12 100 2.2 - 3 standard version 2 x 2.5 100 2.2 - 6 standard version 2 x 0.78 100 2.2 - 10 standard version 2 x 0.225 100 2.2 - 15 standard version 2 x 0.075 100 2.2 - 0.5 medical version (m5) 2 x 24 100 - 1 1 medical version (m5) 2 x 12 100 - 1 3 medical version (m5) 2 x 2.5 100 - 1 6 medical version (m5) 2 x 0.78 100 - 1 10 medical version (m5) 2 x 0.225 100 - 1 15 medical version (m5) 2 x 0.075 100 - 1 dimensions step 1 place the socket in top edge of the panel cut-out. step 2 push the socket upwards. step 3 push the socket forward into the panel cut-out. step 4 release the socket. the component is self adjusting. diagrams standard version 1) line 2) load medical version 1) line 2) load
power entry modules with line filter grf4 www.schurter.com/pg0 6 emc products attenuation loss - - - - differential mode _____ common mode standard version 0.5 a 1 a 3 a 6 a 10 a 15a medical version (m5) 0.5 a 1 a 3 a 6 a 10 a 15a variants rated current iec [a] rated current ul [a] filter-type panel thickness s [mm] order number 0.5 0.5 standard version 1 grf4.0411.011.c 1 1 standard version 1 grf4.0412.011.c 6 6 standard version 1 grf4.0416.011.c 10 10 standard version 1 grf4.0417.011.c 0.5 0.5 standard version 1.5 grf4.0411.013.c 1 1 standard version 1.5 grf4.0412.013.c 3 3 standard version 1.5 grf4.0413.013.c 6 6 standard version 1.5 grf4.0416.013.c 10 10 standard version 1.5 grf4.0417.013.c 15 15 standard version 1.5 grf4.0419.013.c 3 3 standard version 2 grf4.0413.014.c 0.5 0.5 medical version (m5) 1.5 grf4.0021.013.c 1 1 medical version (m5) 1.5 grf4.0022.013.c 3 3 medical version (m5) 1.5 grf4.0023.013.c 6 6 medical version (m5) 1.5 grf4.0026.013.c 10 10 medical version (m5) 1.5 grf4.0027.013.c 15 15 medical version (m5) 1.5 grf4.0029.013.c articles with packing unit 200 (without ending ".c") are no longer available technical data of filter-components rated current [a] filter-type inductances l [mh] capacitance cx [nf] capacitance cy [nf] r [m ? ] 0.5 standard version 2 x 24 100 2.2 - 1 standard version 2 x 12 100 2.2 - 3 standard version 2 x 2.5 100 2.2 - 6 standard version 2 x 0.78 100 2.2 - 10 standard version 2 x 0.225 100 2.2 - 15 standard version 2 x 0.075 100 2.2 - 0.5 medical version (m5) 2 x 24 100 - 1 1 medical version (m5) 2 x 12 100 - 1 3 medical version (m5) 2 x 2.5 100 - 1 6 medical version (m5) 2 x 0.78 100 - 1 10 medical version (m5) 2 x 0.225 100 - 1 15 medical version (m5) 2 x 0.075 100 - 1
4 power entry modules with line filter grf4 www.schurter.com/pg0 6 emc products packaging unit 20 pcs mating outlets/connector s category / description appliance outletoverview complet e iec appliance outlet f, screw-on mounting, front side, solder terminal 478 7 iec appliance outlet f, snap-in mounting, front side, solder or quick-connect terminal 478 8 iec appliance outlet f or h, screw-on mounting, front side, solder, pcb or quick-connect terminal 509 1 iec appliance outlet f or h, screw-on mounting, front side, solder or quick-connect terminal 509 2 appliance outletfurther types togrf 4 connectoroverview complet e iec connector c15, rewireable, straight 010 1 iec connector c15a, rewireable, straight 010 2 iec connector c15a, rewireable, straight 0102- g iec connector c15a, rewireable, angled 011 2 iec connector c13, rewireable, angled 401 2 connectorfurther types togrf 4 ... power cordoverview complet e power cord with iec connector c13, angled 031 1 power cord with iec connector c13, angled 301 1 power cord with iec connector c13, angled 301 2 power cord with iec connector c13, angled 301 3 power cord with iec connector c13 302 0 power cordfurther types togrf 4 ... the specifications, descriptions and illustrations indicated in this document are based on current information. all content is subject to modifications and amendments.
|
