132 phone 800/426 8688 fax 800/626 0329 3 product referral generator
133 3 fiber optic cable assemblies
134 phone 800/426 8688 fax 800/626 0329 3 sc 8 angled pc cable assemblies, single-mode in order to meet the system requirements of the cable tv (catv) industry and other high-speed digital systems, 3m has developed a single-mode sc 8 angle- polished connector to minimize re? ections to a mean of -80 db. 298 sc insertion loss (db) sc reflection (db) 0 0 0.05 0.1 0.15 0.2 0.25 0.3 0.35 0.4 0.45 0.5 0.55 0.6 sc 8 angled insertion loss (db) frequency 5 10 15 20 0 -65- 66 -67 -68 -69 - 70 - 7 1 - 7 2 - 7 3 - 7 4 - 7 5 - 7 6 - 7 7 - 7 8 - 7 9 -80 -8 1 -8 2 - 83 -84 - 8 5 sc 8 angled reflection (db) frequency 5 10 15 20 25 30 features ? benefits sc 8 angled pc cable assemblies 8 angle polish on ferrule low re? ections, mated or unmated; (patents issued us 5,351,327, intermateable with other sc 8 angled us 5,458,582, us 5,321,784) connectors meeting industry standards contacting ? bers low, stable insertion loss isolated ferrule design not affected by cable disturbance push-pull mating (sc) high density, repeatable connections zirconia ceramic ferrule durable, compliant material thermoplastic shell corrosion resistant sc cable assemblies sc cable assemblies are designed for the most advanced ? ber optic systems requiring exceptional stability, low re? ections (single-mode) and high density. the cable assemblies can be converted from simplex to duplex quickly and easily in the ? eld using the sc duplex clip with no additional tools. 299
135 3 fiber optic cable assemblies st* connector cable assemblies, bayonet the bayonet st* cable assemblies, available in both multimode and single-mode, are supplied with a high quality pc ? nish on zirconia ceramic ferrules. a pc ? nish is a convex radius ? nish on the ? ber and ferrule of the connector resulting in a positive contact of two mated ? bers. the pc zirconia ferrule assures low attenuation and re? ected power. the st* product line provides high repeatability and low light loss for premises, lan and telco applications. the 3m connector design is compatible with the systimax* components and other st* connector products. st* connector multimode cable assemblies, push-pull the push-pull st* cable assemblies have been designed to incorporate a push-pull latching mechanism that allows the connectors to be inserted straight into the coupling using the housing or boot. the connector is also resistant to lateral and axial pull for increased reliability. the cable assemblies can be converted from simplex to duplex quickly and easily in the ? eld using the push-pull duplex clip with no additional tools or training. 0 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 5 10 15 20 25 30 35 st* push pull sm insertion loss (db) frequency 301 300 0 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 5 10 15 20 25 30 35 st* multimode insertion loss (db) frequency 0 2 10 st* sm insertion loss (db) frequency 4 6 8 0.1 0.2 0.3 st* sm reflection (db)
136 phone 800/426 8688 fax 800/626 0329 3 fc/pc angled cable assembly 303 fc/pc cable assemblies the fc/pc factory polished cable assemblies incorporate 3ms pre-radiused pc zirconia ceramic technology to provide high optical performance and minimize re? ected power to -55 db. fc/pc reflection (db) fc/pc insertion loss (db) fc/pc angled cable assemblies in order to meet the system requirements of the cable tv(catv) industry and other high-speed digital systems, 3m has developed a single-mode fc 8 angle- polished connector to minimize re? ections to a mean of -80 db. worldwide, there are two defacto standards for fc/apc connectors; a 2.0 mm nominal connector key and a 2.15 mm connector key are in widespread use. long term, it is expected that the 2.0 mm nominal connector key will dominate the marketplace. specially designed, tight key couplings are available for both the 2.0 mm and 2.15 mm connectors which offer premium optical performance. the angled end ? nishes of the connectors could also mate with the standard fc couplings with an additional 0.15 db insertion loss. features ? benefits fc/pc angled cable assemblies 8 angle polish on ferrule low re? ections, mated or unmated (patents issued us 5,351,327, intermateable with other fc/pc 8 angled us 5,458,582, us 5,321,784) connectors meeting industry standards contacting ? bers low, stable insertion loss zirconia ceramic ferrule durable, compliant material 302 0 0 0.05 0.1 0.15 0.2 0.25 0.3 0.35 0.4 0.45 0.5 0.55 0.6 fc/pc 8 angled insertion loss (db) frequency 5 10 15 20 0 -65- 66 -67 -68 -69 - 70 - 7 1 - 7 2 - 7 3 - 7 4 - 7 5 - 7 6 - 7 7 - 7 8 - 7 9 -80 -8 1 -8 2 - 83 -84 - 8 5 fc/pc 8 angled reflection (db) frequency 5 10 15 20 25 30
137 3 fiber optic cable assemblies optical ca b le speci? ca tions f or ca b le assemb lies code vendor number cable od jacket loss/max band bend tensile cable of nominal color 1300/1550 nm width radius load weight ? bers (mm) (db/km) 1300 nm (cm) (install n) (kg/km) (mhz-km) single-mode unjacketed au siecor 1 0.9 white 1.0/.75 n/a 5.0 3 0.9 mq at&t 1 0.9 yellow 0.5/0.3 n/a 3.8 6 0.6 jacketed at siecor 1 2.9 yellow 1.0/.75 n/a 5.0 500 7.8 mk at&t 1 2.9 yellow 0.5/0.3 n/a 3.8 220 6.2 bw siecor 2 2.9 x 5.8 yellow 1.0/.75 n/a 5.0 1000 14.7 multi-? ber (900 m sub-units) ea siecor 4 5.2 yellow 1.0/.75 n/a 7.5 1000 23 eb siecor 6 5.2 yellow 1.0/.75 n/a 7.5 1000 23 gy siecor 12 7.0 yellow 1.0/.75 n/a 10.5 1800 53 ec siecor 24 10.6 yellow 1.0/.75 n/a 15.9 2700 122 ed siecor 36 14.9 yellow 1.0/.75 n/a 22.4 4000 191 ee siecor 72 21.5 yellow 1.0/.75 n/a 32.3 5500 320 multimode 50/125 m zk siecor 1 0.9 orange 4.0/na 400 5.0 6 0.9 zj siecor 1 2.9 orange 4.0/na 400 5.0 500 7.8 ax siecor 2 2.9 x 5.8 orange 4.0/na 400 5.0 1000 15.6 62.5/125 m ap siecor 1 0.9 orange 2.0/na 500 5.0 6 0.9 af siecor 1 2.9 orange 2.0/na 500 5.0 500 7.8 aq siecor 2 2.9 x 5.8 orange 2.0/na 500 5.0 1000 15.6 notes: *1. cables available in assemblies only. 2. all cables are riser rated (ofnr) and meet requirements of ul 1666. 3. all jacketed simplex and duplex cable are 3m private labeled. 304 biconic cable assemblies biconic cable assemblies have been widely used throughout the telecommunications industry, featuring a conical design that minimizes connector wear and provides a dust-free, moisture-proof connection.
138 phone 800/426 8688 fax 800/626 0329 3 standard jumpers and pigtails cable assemblies ordering chart (simplex and duplex) in five easy steps, you can accurately specify your cable assembly. establish 3m part numbers by using the following codes. cable assembly information a single-mode 3m supplied connector and cable b multimode 3m supplied connector and cable cable lengths 0001 1 meter 02.5 2.5 meters 0003 3 meters 0005 5 meters 0010 10 meters connector end #2 information use same codes as end #1 00 pigtail connector end #1 information single-mode aa biconic am st* (bayonet) da sc, standard density dg sc, high density ep sc 8 angle, standard density en fc/pc eu fc 8 angle (2.15 mm key) ex fc 8 angle (2.0 mm key) multimode ab biconic an st (bayonet) db sc, standard density ek push/pull st* em fc/pc note: all st*, sc and fc connectors have pc finish. cable information siecor single-mode cable/corning fiber at jacketed au unjacketed bw jacketed duplex at&t single-mode fiber and cable mk jacketed mq unjacketed siecor multimode cable/corning fiber zk 50/125 unjacketed zj 50/125 jacketed ax 50/125 jacketed duplex ap 62.5/125 unjacketed af 62.5/125 jacketed aq 62.5/125 jacketed duplex step 1 step 3 step 4 step 5 step 2 for additional cables, including duplex, multi-fiber or plenum jacket, please ca ll 800/426 8688. push #1 for ordering department or push #3 for literature. note: jacketed cables are 3 mm od unless otherwise stated. pigtails must be orde red in multiples of two. a eu eu mk 0 0 1 0 (aeueu -mk 0 010) example: single-mode fc 8 angle (2.15 mm key) to fc 8 angle (2.15 mm key) at&t jacketed cable, 10 meters
139 3 fiber optic cable assemblies pre-connectorized, multi-fiber cable assembly ordering chart the part number for the pre-connectorized multi-fiber cable is determined using a system similar to the system used for other 3m cable assemblies. cable assembly information a single-mode 3m supplied connector and cable cable lengths 0010 10 meters 20.5 20.5 meters 0025 25 meters connector end #2 use same codes as end #1 00 pigtail all cables listed are ofnr riser-rated. for plenum cable, please call customer s ervice at 800/426 8688. pre-connectorized multi-fiber pigtail assemblies must be ordered in multiples of two for the same cable code. connector end #1 single-mode aa biconic am st* (bayonet) da sc, standard density dg sc, high density ep sc 8 angle, standard density en fc/pc eu fc 8 angle (2.15 mm key) ex fc 8 angle (2.0 mm key) note: all st*, sc and fc connectors have pc finish. cable 1 single-mode siecor, 900 m sub-units ea 4 fiber eb 6 fiber gy 12 fiber ec 24 fiber ed 36 fiber ee 72 fiber siecor, 2.4 mm sub-units gj 6 fiber fw 12 fiber accuribbon fanout ordering chart the product number for the accuribbon fanout is determined using a system similar to the system used for other 3m cable assemblies. cable assembly information a single-mode 3m supplied connector and cable b multimode 3m supplied connector and cable ribbon length from module 0001 1 meter 02.5 2.5 meters f fanout example: single-mode fc/pc fanout with 24" (0.6 m) pigtails and 2 meters (6.5 feet) of ribbon note: accuribbon fanouts must be ordered in multiples of two for the same cable code. a 24" pigtails (0.6 m) b 48" pigtails (1.2 m) connector type single-mode aa biconic am st* (bayonet) da sc, standard density dg sc, high density ep sc 8 angle, standard density en fc/pc eu fc 8 angle (2.15 mm key) ex fc 8 angle (2.0 mm key) multimode (125) aa biconic an st (bayonet) ek push/pull st db sc em fc/pc note: all st, sc and fc connectors have pc finish. cable code for 12-fiber accuribbon br 8/125 m single-mode bs 62.5/125 m multimode a e n f a b r 0 0 0 2 (aenfa-br0002) pre-connectorized multi-fiber cable as a leader in the ? ber optic cable assembly market, 3m continues to ful? ll the changing needs of the industry with the provision of pre-terminated multi-? ber cables. pre-connectorized cable assemblies are used in applications such as intra-building networks and military ? eld applications. pre-connectorized multi- ? ber cables are factory terminated at one or both ends with the customers choice of connectors. these single-mode assemblies are tested to meet speci? c ? ber connector requirements. accuribbon* fanout the accuribbon* fanout is a pre-connectorized assembly which can be mechanically or fusion spliced to 12-? ber ribbon for termination in the ? ber distribution frame. the 12-? ber accuribbon* fanout is separated into individual ? bers which are protected with 1.7 mm pvc tubing and terminated with connectors. the accuribbon ? ber is transitioned through a small plastic module. the terminated ends of the ? bers are spaced 24 or 48 inches from the fanout module. the length of accuribbon ? ber extending from the module is speci? ed by the customer. the fibrlok ? 2612 multi-fiber optical splice is available for fast mechanical splicing of ribbon or ribbonized ? ber. this splicing system is ideal for accuribbon fanout installations with a minimum investment in time and tooling.
|
