View AUIRS2301S_6627640.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

www.irf.com ? 2009 international rectifier 1 january 14, 2011 automotive grade AUIRS2301S high and low side driver features ? floating channel designed for bootstrap operation ? fully operational to +600v ? tolerant to negative transient voltage ? dv/dt immune ? gate drive supply range from 5v to 20v ? undervoltage lockout for both channels ? 3.3v, 5v and 15v input logic compatible ? matched propagation delay for both channels ? outputs in phase with inputs ? lower di/dt gate driver for better noise immunity ? leadfree, rohs compliant ? automotive qualified* typical applications o automotive motor drives o servo drives o micro inverter drives o general purpose three phase inverters product summary v offset 600v max v out 5v ? 20v i o+ & i o- (typical) 200ma / 350ma t on & t off (typical) 220ns / 200ns delay matching 50ns package options 8-lead soic AUIRS2301S typical connection diagram
AUIRS2301S www.irf.com ? 2009 international rectifier 2 table of contents page typical connection diagram 1 description 3 feature comparison 3 qualification information 4 absolute maximum ratings 5 recommended operating conditions 5 dynamic electrical characteristics 6 static electrical characteristics 6 functional block diagram 7 input/output timing diagram 8 lead definitions 9 lead assignments 9 application information and additional details 10 parameter temperature trends 12 - 14 package details 15 tape and reel details 16 part marking information 17 ordering information 17 important notice 18
AUIRS2301S www.irf.com ? 2009 international rectifier 3 description the AUIRS2301S is a high voltage, high speed power mosfet and igbt driver with independent high- and low-side referenced output channels. proprietary hvic and latch immune cmos technologies enable ruggedized monolithic construction. the logic input is co mpatible with standard cmos or lsttl output, down to 3.3v logic. the output drivers featur e a high pulse current buffer stage. the floating channel can be used to drive an n-channel power mosfet or igbt in the high- side configuration which operates up to 600v.
AUIRS2301S www.irf.com ? 2009 international rectifier 4 qualification information ? automotive (per aec-q100 ?? ) qualification level comments: this family of ics has passed an automotive qualification. ir?s industrial and consumer qualification level is granted by extension of the higher automotive level. moisture sensitivity level msl3 ??? 260c (per ipc/jedec j-std-020) machine model class m2 (pass +/-200v) (per aec-q100-003) human body model class h1c (pass +/-2000v) ( per aec-q100-002 ) esd charged device model class c5 (pass +/-1000v) (per aec-q100-011) ic latch-up test class ii , level b (per aec-q100-004) rohs compliant yes ? qualification standards can be found at international rectifier?s web site http://www.irf.com/ ?? exceptions to aec-q100 requirements are noted in the qualification report. ??? higher msl ratings may be available for the specific package types listed here. please contact your international rectifier sales repr esentative for further information.
AUIRS2301S www.irf.com ? 2009 international rectifier 5 absolute maximum ratings absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. all voltage parameters are absolute voltages referenced to com. t he thermal resistance and power dissipation ratings are measured under board mounted and still air conditions. symbol definition min. max. units v b high-side floating absolute voltage -0.3 625 v s high-side floating supply offset voltage v b - 25 v b + 0.3 v ho high-side floating output voltage v s - 0.3 v b + 0.3 v cc low-side and logic fixed supply voltage -0.3 25 v lo low-side output voltage -0.3 v cc + 0.3 v in logic input voltage (hin & lin) com -0.3 v cc + 0.3 v dv s /dt allowable offset supply voltage transient ? 50 v/ns p d package power dissipation @ ta 25c ? 0.625 w rth ja thermal resistance, junction to ambient ? 200 c/w t j junction temperature ? 150 t s storage temperature -50 150 t l lead temperature (soldering, 10 seconds) ? 300 c recommended operating conditions the input/output logic timing diagram is shown in fig. 1. for proper operation the device should be used within the recommended conditions. the v s offset rating is tested with all s upplies biased at 15v differential. ?: logic operational for v s of -5 v to +600 v. logic state held for v s of -5 v to ? v bs. symbol definition min. max. units v b high-side floating supply absolute voltage v s + 5 v s + 20 v s high-side floating supply offset voltage ? 1 600 v ho high-side floating output voltage v s v b v cc low-side and logic fixed supply voltage 5 20 v lo low-side output voltage 0 v cc v in logic input voltage (hin & lin) com v cc v t a ambient temperature -40 125 c (please refer to the design tip dt97 -3 for more details).
AUIRS2301S www.irf.com ? 2009 international rectifier 6 static electrical characteristics unless otherwise noted, these spec ifications apply for an operating j unction temperature range of -40c tj 125c with bias conditions of v bias (v cc , v bs ) = 15v. the v il, v ih and i in parameters are referenced to com and are applicable to the respective input leads: hin and lin. the v o, i o and r on parameters are referenced to com and are applicable to the respective output leads: ho and lo. symbol definition min typ max units test conditions v ih logic ?1? input voltage 2.5 ? ? v il logic ?0? input voltage ? ? 0.8 v v cc = 10v to 20v v oh high level output voltage, v bias - v o ? ? 0.2 v ol low level output voltage, v o ? ? 0.1 v i o = 2ma i lk offset supply leakage current ? ? 50 v b = v s = 600v i qbs quiescent v bs supply current 60 160 260 i qcc quiescent v cc supply current 60 160 260 v in = 0v or 5v i in+ logic ?1? input bias current ? 5 20 v in = 5v i in- logic ?0? input bias current ? ? 5 a v in = 0v v ccuv+ v bsuv+ v cc and v bs supply undervoltage positive going threshold 3.3 4.1 5 v ccuv- v bsuv- v cc and v bs supply undervoltage negative going threshold 3 3.8 4.7 v ccuvh v bsuvh hysteresis 0.1 0.3 ? v i o+ output high short circuit pulsed current ? 200 ? v o = 0v, pw 10s i o- output low short circuit pulsed current ? 350 ? ma v o = 15v, pw 10s dynamic electrical characteristics unless otherwise noted, these specifications apply for an operating junction temperature range of -40c tj 125c with bias conditions of v bias (v cc , v bs ) = 15 v, c l = 1000 pf. symbol definition min typ max units test conditions t on turn-on propagation delay ? 220 300 v s = 0v t off turn-off propagation delay ? 200 280 v s = 0v or 600v mt delay matching, hs & ls turn-on/off ? 0 50 t r turn-on rise time ? 130 220 t f turn-off fall time ? 50 80 ns v s = 0v
AUIRS2301S www.irf.com ? 2009 international rectifier 7 functional block diagram:
AUIRS2301S www.irf.com ? 2009 international rectifier 8 input/output pin equivalent circuit diagrams: v cc lo esd diode esd diode com/v ss v b v s ho esd diode esd diode 25v 25v 600v
AUIRS2301S www.irf.com ? 2009 international rectifier 9 lead definitions: pin# symbol description 1 v cc low-side and logic fixed supply 2 hin logic input for high-side gate driver outputs (ho), in phase with ho 3 lin logic input for low-side gate driv er outputs (lo), in phase with lo 4 com low-side return 5 lo low-side gate drive output 6 v s high-side floating supply return 7 ho high-side gate drive output 8 v b high-side floating supply lead assignments
AUIRS2301S www.irf.com ? 2009 international rectifier 10 application information and additional details figure 1: input/output timing diagram figure 2: switching time waveform definitions figure 3: delay matching waveform definitions
AUIRS2301S www.irf.com ? 2009 international rectifier 11 tolerability to negative vs transients the AUIRS2301S has been seen to withstand negative v s transient conditions on the order of -25v for a period of 100 ns (v bias (v cc , v bs ) = 15v and t a = 25c). an illustration of the AUIRS2301S performance can be seen in figure 4. even though the AUIRS2301S has been s hown able to handle these negative v s transient conditions, it is highly recommended that the circuit des igner always limit the negative v s transients as much as possible by careful pcb layout and component use. vs (v) -30 -20 -10 0 figure 4: -vs transient results
AUIRS2301S www.irf.com ? 2009 international rectifier 12 parameter temperature trends figures illustrated in this chapter provide information on the experimental performanc e of the AUIRS2301S hvic. the line plotted in each figure is generated from actual lab data. a large number of individual samples were tested at three temperatures (-40 oc, 25 oc, and 125 oc) in order to generate the experimental cu rve. the line consists of three data points (one data point at each of the tested temperatures ) that have been connected together to illustrate the understood trend. the individual data points on the typ. curve were det ermined by calculating the averaged experimental value of the param eter (for a given temperature). 100 150 200 250 300 -50 -25 0 25 50 75 100 125 turn-on propagation delay (ns) 100 150 200 250 300 -50 -25 0 25 50 75 100 125 turn-off propagation delay (ns max. temperature ( o c) typ. min. temperature ( o c) ) max. typ. min. figure 5: t on vs. temperature figure 6: t off vs. temperature 50.0 75.0 100.0 125.0 150.0 -50-250 25507510012 o turn-on rise time (ns) typ. 5 temperature ( c) max. min. 15 30 45 60 75 -50 -25 0 25 50 75 100 125 o turn-off fall time (ns) temperature ( c) - typ. max. min. figure 7: t r vs. temperature figure 8: t f vs. temperature
AUIRS2301S www.irf.com ? 2009 international rectifier 13 100.00 150.00 200.00 250.00 300.00 -50 -25 0 25 50 75 100 125 temperature ( o c) quiescent v cc supply current (ua) typ. max. min. 100 150 200 250 300 -50 -25 0 25 50 75 100 125 temperature ( o c) quiescent v bs supply current (ua) typ. max. min. figure 9: v cc supply current vs. temperature figure 10: v bs supply current vs. temperature 3.00 3.50 4.00 4.50 5.00 -50 -25 0 25 50 75 100 125 temperature ( o c) v cc supply uv+ going threshold (v) typ. max. min. 3.00 3.50 4.00 4.50 5.00 -50 -25 0 25 50 75 100 125 temperature ( o c) v cc supply uv- going threshold (v) typ max min. figure 11: v ccuv+ vs. temperature figure 12: v ccuv- vs. temperature 3.00 3.50 4.00 4.50 5.00 -50 -25 0 25 50 75 100 125 o v bs supply uv+ going threshold (v) typ. temperature ( c) max. min. 3.00 3.50 4.00 4.50 5.00 -50 -25 0 25 50 75 100 125 temperature ( o c) v bs supply uv- going threshold (v) typ. max. min. figure 13: v bsuv+ vs. temperature figure 14: v bsuv- vs. temperature
AUIRS2301S www.irf.com ? 2009 international rectifier 14 0.00 0.05 0.10 0.15 0.20 -50 -25 0 25 50 75 100 125 temperature ( o c) high level output (v) typ. max. 0.000 0.025 0.050 0.075 0.100 -50 -25 0 25 50 75 100 125 o low level output (v) typ. temperature ( c) max. min. min. figure 15: v oh (i o = 2ma) vs. temperature figure 16: v ol (i o = 2ma) vs. temperature 0.0 2.5 5.0 7.5 10.0 -50 -25 0 25 50 75 100 125 o logic "1" input bias current (ua) typ. temperature ( c) max. min. -0.5 -0.4 -0.3 -0.2 -0.1 0.0 -50 -25 0 25 50 75 100 125 o logic "0" input bias current (ua) typ. temperature ( c) max. min. figure 17: logic ?1? input bias current vs. temperature figure 18: logic ?0? input bias current vs. temperature 0 10 20 30 40 -50-25 0 25507510012 temperature ( o c) offset supply leakage current (ua) typ. 5 max. min. figure 19: offset leakage current vs. temperature
AUIRS2301S www.irf.com ? 2009 international rectifier 15 package details
AUIRS2301S www.irf.com ? 2009 international rectifier 16 tape and reel details carrier tape dimension for 8soicn code min max min max a 7.90 8.10 0.311 0.318 b 3.90 4.10 0.153 0.161 c 11.70 12.30 0.46 0.484 d 5.45 5.55 0.214 0.218 e 6.30 6.50 0.248 0.255 f 5.10 5.30 0.200 0.208 g 1.50 n/a 0.059 n/a h 1.50 1.60 0.059 0.062 reel dimensions for 8soicn code min max min max a 329.60 330.25 12.976 13.001 b 20.95 21.45 0.824 0.844 c 12.80 13.20 0.503 0.519 d 1.95 2.45 0.767 0.096 e 98.00 102.00 3.858 4.015 f n/a 18.40 n/a 0.724 g 14.50 17.10 0.570 0.673 h 12.40 14.40 0.488 0.566 metric imperial metric imperial e f a c d g a b h n ote : controlling dimension in mm loaded tape feed direction a h f e g d b c
AUIRS2301S www.irf.com ? 2009 international rectifier 17 part marking information ordering information standard pack base part number package type form quantity complete part number tube/bulk 95 AUIRS2301S auirs2301 soic8 tape and reel 2500 AUIRS2301Str
AUIRS2301S www.irf.com ? 2009 international rectifier 18 important notice unless specifically designated for the autom otive market, international rectifier corporation and its subsidiaries (ir) reserve the right to make corrections, modificati ons, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or services wit hout notice. part numbers designated with the ?au? prefix follow automotive industry and / or customer s pecific requirements with regards to product discontinuance and process change notification. all products are sold subject to ir?s terms and conditions of sale supplied at the time of order acknowledgment. ir warrants performance of its hardware products to the spec ifications applicable at the time of sale in accordance with ir?s standard warranty. testing and other quality cont rol techniques are used to the extent ir deems necessary to support this warranty. except w here mandated by government requirements, testing of all parameters of each product is not necessarily performed. ir assumes no liability for applications assistance or cust omer product design. customers are responsible for their products and applications using ir components. to minimi ze the risks with customer products and applications, customers should provide adequate design and operating safeguards. reproduction of ir information in ir data books or data sheet s is permissible only if reproduction is without alteration and is accompanied by all associated warranties, condi tions, limitations, and notices . reproduction of this information with alterations is an unfair and deceptive busine ss practice. ir is not responsible or liable for such altered documentation. information of third parties may be subject to additional restrictions. resale of ir products or serviced with statements differ ent from or beyond the parameters stated by ir for that product or service voids all express and any implied warr anties for the associated ir product or service and is an unfair and deceptive business practice. ir is not responsible or liable for any such statements. ir products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or in other applications intended to s upport or sustain life, or in any other application in which the failure of the ir product could create a situation where personal injury or death may occur. should buyer purchase or use ir products for any such unintended or unauthorized application, buyer shall indemnify and hold international rectifier and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees aris ing out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ir was negligent regarding the design or manufacture of the product. ir products are neither designed nor intended for use in military/aerospace applications or environments unless the ir products are specifically designated by ir as military-grade or ?enhanced pl astic.? only products designated by ir as military-grade meet military spec ifications. buyers acknowledge and agree that any such use of ir products which ir has not designated as military-gr ade is solely at the buyer?s risk, and t hat they are solely responsible for compliance with all legal and regulatory r equirements in connection with such use. ir products are neither designed nor intended for use in aut omotive applications or envir onments unless the specific ir products are designated by ir as compliant with iso/ts 16949 requirements and bear a part number including the designation ?au?. buyers acknowledge and agree that, if they use any non-designated products in automotive applications, ir will not be responsible for any failure to meet such requirements. for technical support, please contact ir?s technical assistance center http://www.irf.com/technical-info/ world headquarters: 233 kansas st., el segundo, california 90245 tel: (310) 252-7105
AUIRS2301S www.irf.com ? 2009 international rectifier 19 revision history date comment 11/18/08 new template, standard pack quantity corrected 12/1/08 removed typical applications section from the first page changed i o+ & i o- text from typ to min, min values were reported updated all parameters to reflect the previously released gen2 part, modifications can be made at a later date if need be imported correct i/o diagrams 12/9/08 added pin# in lead assignm ent table and changed the order 2/6/09 changed esd/lu ratings to tbd pending data 3/3/9 removed pdip 3/4/09 removed ?parameter temp trend? secti on (updated page number references as well) modified page header to read ?2301? in place of ?2103? changed iqcc from 50/120/190ua to 60/150/240ua changed iqbs from 20/60/100ua to 60/150/240ua 6/2/09 feature comparison removed on p3 qual table updated 6/9/09 f front page: - high and low side driver in place of half bridge driver (no cross conduction prevention logic, no dead time). - ?logic and power ground 5v offset? sentenc e removed (only com exists as ground pin). page3: ? designed for minimum driver cro ss-conduction? sentence erased. page 11: added this page with section ?tolerabilit y to negative vs transi ents? (apbu review) 7/2/09 updated iqcc/iqbs ul to 260ua from 240ua 7/9/09 changed the year to 2009 in footer removed ?( )? in the part number in the description and file name removed rows for pdip in the absolute maximum ratings removed min spec on io+/io- since we don?t test this parameter on ate deleted ?soic8? from qual table 7/15/09 t a max temp changed from 150 to 125 7/28/09 remove preliminary sign (dr3 approved) 7/30/09 application section added in front page 9/8/09 esd class modified mm m2 (was m3 based on the incorrect esd summary) 9/14/09 added esd passing voltages 1/13/11 added parameter temperature trends, updated test condition to tri-temp and important notice 1/14/11 revised io+/- to be typical value on front page

▲Up To Search▲

Price & Availability of AUIRS2301S

	To Download AUIRS2301S Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .