testing 1 2 3 4 8 n.c. n.o. 7 6 5 super miniature design, sop (1form a/1form b) 8-pin type. controls load voltage 350v. mm inch 9.37 .369 4.4 .173 2.1 .083 features 1. 2 channels in super miniature de- sign the device comes in a super-miniature so package measuring (w) 4.4 (l) 9.37 (h) 2.1 mm (w) .173 (l) .369 (h) .083 inch ?pprox. 38% of the volume and 66% of the footprint size of dip type pho- tomos relays. 2. tape and reel the device comes standard in a tape and reel (1,000 pcs./reel) to facilitate automat- ic insertion machines. applicable for 1 form a 1 form b use as well as two independent 1 form a and 1 form b use controls low-level analog signals photomos relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion 5. low-level off state leakage current volume (sop)(dip) approx. 38% footprint approx. 66% typical applications telephones measuring instruments computer industrial robots high-speed inspection machines. types 1. ac/dc type *indicate the peak ac and dc values. notes: (1) tape package is the standard packing style. also available in tube. (part no. suf x "x" or "z" is not needed when ordering; tube: 50 pcs.; case: 1,000 pcs.) (2) for space reasons, the package type indicator "x" and "z" are omitted from the seal. output rating* part no. packing quantity in tape and reel load voltage load current picked from the 1/2/3/4-pin side picked from the 5/6/7/8-pin side 350 v 100 ma AQW610Sx AQW610Sz 1,000 pcs. rating 1. ac/dc type 1. absolute maximum ratings (ambient temperature : 25 c 77 f ) item symbol AQW610S remarks input led forward current i f 50 ma led reverse voltage v r 5 v peak forward current i fp 1 a f = 100 hz, duty factor = 0.1% power dissipation p in 75 mw output load voltage (peak ac) v l 350 v continuous load current i l 0.1 a (0.13 a) peak ac, dc ( ): in case of using only 1a or 1b, 1 channel peak load current i peak 0.3 a 100 ms (1 shot), v l = dc power dissipation p out 600 mw total power dissipation p t 650 mw i/o isolation voltage v iso 1,500 v ac temperature limits operating t opr 40 c to +85 c 40 f to +185 f non-condensing at low temperatures storage t stg 40 c to +100 c 40 f to +212 f gu photomos (AQW610S) all rights rese r v ed c o p y r i gh t matsushita elect r ic w o r k s , ltd.
gu photomos (AQW610S) 2. electrical characteristics (ambient temperature : 25 c 77 f ) note: recommendable led forward current i f = 5 ma. f or type of connection *operate/reverse time for dimensions for s c hematic and wiring di a grams for cautions f or us e item symbol AQW610S condition input led operate current typical i fon 0.9 ma i l = max. maximum 3 ma led reverse current minimum i foff 0.4 ma i l = max. typical 0.8 ma led dropout voltage typical v f 1.25 v (1.14 v at i f = 5 ma) i f = 50 ma maximum 1.5 v output on resistance typical r on 18 ? i f = 5 ma (n.o.) i f = 0 ma (n.c.) i l = max. within 1 s on time maximum 25 ? off state leakage current maximum i leak 1 a i f = 0 ma (n.o.) i f = 5 ma (n.c.) v l = max. transfer characteristics operate time* typical t on 0.28 ms (n.o.), 0.52 ms (n.c.) i f = 0 ma ? 5 ma i l = max. maximum 1.0 ms reverse time* typical t off 0.04 ms (n.o.), 0.23 ms (n.c.) i f = 5 ma ? 0 ma i l = max. maximum 1.0 ms i/o capacitance typical c iso 0.8 pf f = 1 mhz v b = 0 v maximum 1.5 pf initial i/o isolation resistance minimum r iso 1,000 m ? 500 v dc ton input output 10% 90% 1) n.o. 2) n.c. toff toff input output 10% 90% ton reference data 1. load current vs. ambient temperature characteristics allowable ambient temperature: 40 c to +85 c 40 f to +185 f 2. on resistance vs. ambient temperature characteristics measured portion: between terminals 5 and 6, 7 and 8; led current: 5 ma; load voltage: max. (dc); continuous load current: max. (dc) 3. operate time vs. ambient temperature characteristics led current: 5 ma; load voltage: max. (dc); continuous load current: max. (dc) ambient temperature, c load current, ma 0 40 60 0204060 80 85 40 20 20 80 100 120 130 using only 1 channel using 2 channels ambient temperature, c on resistance, ? 0 10 20 30 40 40 20 50 0204060 80 85 between terminals 5 and 6(n.o.) between terminals 7 and 8(n.c.) ambient temperature, c operate time, ms 0 0.4 0.6 40 20 1.0 0204060 80 85 0.2 0.8 between terminals 5 and 6(n.o.) between terminals 7 and 8(n.c.) all rights rese r v ed c o p y r i gh t matsushita elect r ic w o r k s , ltd.
gu photomos (AQW610S) 4. reverse time vs. ambient temperature characteristics led current: 5 ma; load voltage: max. (dc); continuous load current: max. (dc) 5. led operate current vs. ambient temperature characteristics load voltage: max. (dc); continuous load current: max. (dc) 6. led reverse current vs. ambient temperature characteristics load voltage: max. (dc); continuous load current: max. (dc) ambient temperature, c reverse time, ms 0 20 40 20 40 60 100 80 85 1.0 0.8 0.6 0.4 0.2 0 between terminals 5 and 6(n.o.) between terminals 7 and 8(n.c.) ambient temperature, c led operate current, ma 0 1 2 3 4 40 20 5 0204060 80 85 between terminals 5 and 6(n.o.) between terminals 7 and 8(n.c.) ambient temperature, c led reverse current, ma 0 1 2 3 4 40 20 5 0204060 80 85 between terminals 5 and 6(n.o.) between terminals 7 and 8(n.c.) 7. led dropout voltage vs. ambient temperature characteristics led current: 5 to 50 ma 8. current vs. voltage characteristics of output at mos portion measured portion: between terminals 5 and 6, 7 and 8; ambient temperature: 25 c 77 f 9. off state leakage current vs. load voltage characteristics measured portion: between terminals 5 and 6, 7 and 8; ambient temperature: 25 c 77 f ambient temperature, c led dropout voltage, v 0 40 20 20 40 60 80 85 1.5 1.4 1.3 1.2 1.1 1.0 0 50ma 30ma 20ma 10ma 5ma 20 40 60 80 140 40 60 80 100 120 140 20 3 2 1 2.5 1.5 0.5 1.5 2.5 0.5 1 23 voltage, v 120 between terminals 5 and 6(n.o.) current, ma 100 between terminals 7 and 8(n.c.) load voltage, v off state leakage current, a 0 60 100 10 3 10 6 10 9 10 12 20 40 80 between terminals 5 and 6(n.o.) between terminals 7 and 8(n.c.) 10. operate time vs. led forward current characteristics measured portion: between terminals 5 and 6, 7 and 8; load voltage: max. (dc); continuous load current: max. (dc); ambient temperature: 25 c 77 f 11. reverse time vs. led forward current characteristics measured portion: between terminals 5 and 6, 7 and 8; load voltage: max. (dc); continuous load current: max. (dc); ambient temperature: 25 c 77 f 12. output capacitance vs. applied voltage characteristics measured portion: between terminals 5 and 6, 7 and 8; frequency: 1 mhz; ambient temperature: 25 c 77 f led forward current, ma operate time, ms 10 0 2030405060 5 4 2 3 1 0 between terminals 5 and 6(n.o.) between terminals 7 and 8(n.c.) led forward current, ma reverse time, ms 10 20 30 40 50 6010 0 2030405060 0.5 0.4 0.3 0.2 0.1 0 between terminals 5 and 6(n.o.) between terminals 7 and 8(n.c.) applied voltage, v output capacitance, pf 0 120 100 80 60 40 20 10 20 30 40 60 50 0 between terminals 5 and 6(n.o.) between terminals 7 and 8(n.c.) all rights rese r v ed c o p y r i gh t matsushita elect r ic w o r k s , ltd.
|
