specification control drawing duraseal is a trademark of ty co electronics corporation. = tyco electronics corporation 300 constitution drive, menlo park, ca. 94025, u.s.a. raychem title: duraseal pin terminal unless otherwise specified dimensions are in millimeters. [inches dimensions are shown in brackets] document no.: B-106-6201 tolerances: 0.00 n/a 0.0 n/a 0 n/a angles: n/a roughness in micron tyco electronics reserv es the right to amend this drawing at any time. users should evaluate the suitability of the product for their application. rev.: a date: 17-jul-06 drawn by: m. foronda cage code: 06090 replaces: d030373 dcr number: d060179 scale: --- size: a sheet: 1 of 1 ? 2006 tyco electronics corporation. all rights reserved. if this document is printed it becomes unc ontrolled. check for the latest revision. product dimensions wire dimensions ?g product name ?a min ?b nom l max color (1) size range mm 2 (awg) min max B-106-6201 4.0 [0.160] 2.0 [0.080] 30.5 [1.200] red 0.5 - 1.0 (awg 22-18) 1.4 [0.055] 4.0 [0.160] materials 1. insulation sleeve: heat-shrinkable, transparent color (1), radiation cross-linked modified polyamide with thermoplastic adhesive coating inside. 2. pin terminal: tin-plated copper alloy. base metal: c110 copper. plating: tin-plated per astm b545, class a. application 1. these controlled crimp devices are desi gned to terminate a tin-plated or bare c opper stranded wire having an insulation rate d for at least 75 c to a pin terminal. it will provide a sp lash proof and strain relief connection. ul listed wire connector 91j4. 2. temperature range: -55 c to +125 c. 3. for application tooling and installation, see rpip-684-00. for best results, prepare the wire as shown:
|