www.baumerivo.com incremental encoders 1 subject to modifcation in technic and design. errors and omissions excepted. 30/10/2008 www.baumerivo.com www.baumerivo.com GPI0W with clamping fange features encoder with shaft ?10 mm or ?6 mm C ptb approved C clamping fange or synchro fange C high rotation speed max.10000 rpm C compact design C high resistance to shock and vibrations C technical data - electrical ratings voltage supply 10...30 vdc reverse polarity protection yes consumption w/o load 30 ma (24 vdc) resolution (steps/turn) 50...500 reference signal zero pulse, width 90 sensing method optical output frequency 150 khz output signals a 90 b + n output circuit push-pull short-circuit proof interference immunity din en 61000-6-2 emitted interference din en 61000-6-4 approval ul approval / e63076 GPI0W technical data - mechanical design housing ?58 mm shaft ?6 mm (synchro fange) ?10 mm (clamping fange) flange clamping or synchro fange protection din en 60529 ip 54 operating speed 10000 rpm starting torque 0.015 nm ip 54 rotor moment of inertia 14.5 gcm2 admitted shaft load 20 n axial 40 n radial materials housing: aluminium flange: aluminium operating temperature -25...+85 c relative humidity 95 % non-condensing resistance din en 60068-2-6 vibration 10 g, 16-2000 hz din en 60068-2-27 shock 200 g, 6 ms weight approx. 250 g e-connection cable shaft with clamping or synchro fange, ptb approved resolution 50 or 500 pulses track a track b zero pulse 90 clockwise rotating direction when looking at flange. output signals
www.baumerivo.com www.baumerivo.com incremental encoders www.baumerivo.com 2 subject to modifcation in technic and design. errors and omissions excepted. 30/10/2008 GPI0W part number GPI0W. 10 see part number (pulses) e-connection 12 cable 2 m, axial 14 cable 5 m, axial 16 cable 10 m, axial 22 cable 2 m, radial 24 cable 5 m radial 26 cable 10 m, radial voltage supply / signals 10 10...30 vdc / push-pull flange / shaft 0 clamping fange, mounting m3 / ?10 mm 1 clamping fange, mounting m4 / ?10 mm 5 synchro fange, mounting m4 / ?6 mm shaft with clamping or synchro fange, ptb approved resolution 50 or 500 pulses part number (pulses) 39 (50) 15 (500) example: ordering key 15 = 500 pulses. core colour assignment green track n (zero pulse) blue track a beige track b black gnd (0 v) brown ub terminal assignment dimensions 120 16 35 10 20 15 15 36f8 48 0.1 58 9 ?10 h8 35 10 20 15 9 ?10h8 13 m3 x 5 sychro flange clamping flange 120 16 41 10 5.5 42 0.1 50h7 58 ?6f8 9 15 3 3 4 41 10 4 9 5.5 ?6f8 13 3 3 16 m4 x 7 accessories mounting accessories (page %s) z 119.006 eccentric fxing, single z 119.013 adaptor plate for clamping fange for modifcation into synchro fange z 119.015 mounting adaptor for synchro fange z 119.017 mounting angle for clamping fange z 119.025 adaptor plate for clamping fange, mounting by eccentric fxings (order separately) z 119.035 bearing fange for encoders with synchro fange outputs push-pull circuit-proof output level high >ub -3 v (i = -20 ma) output level low <0.5 v (i = 20 ma) load high <20 ma load low <20 ma trigger level
|
