View LG-150HY-CT_5952967.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

LG-150HY-CT data sheet doc. no : qw0905-lg- 150hy-ct rev. : a date : 21 - jun - 2005 led smd ligitek electronics co.,ltd. property of ligitek only lead-free parts pb
color yellow algainp LG-150HY-CT material part no emitted water clear lens features: 1. package in 8.0mm carrier tape on 7" diameter reel. 2. compatible with automatic placement equipment. 3. compatible with reflow solder process. descriptions: 1. the lg-150 smd taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. 2. besides, lightweight makes them ideal for miniature applications. etc. applications: 1. automotive : backlighting in dashboard and switch. 2. telecommunication : indicator and backlighting in telephone and fax. 3. flat backlight for lcd, switch and symbol 4. general use. device selection guide: ligitek electronics co.,ltd. property of ligitek only page 1/10 part no. LG-150HY-CT
recommended soldering pad dimensions note : the tolerances unless mentioned is ? 0.1mm,angle ? 0.5. unit=mm. note : 1.all dimension are in millimeter tolerance is ? 0.1mm unless otherwise noted. 2.specifications are subject to change without notice. 1.6 2.0 1.6 1.6 package dimensions ligitek electronics co.,ltd. property of ligitek only page 2/10 part no. LG-150HY-CT resin 2.0 3.2 led die pcb soldering terminal 0.6 cathode mark 1.6 0.5 1.1 0.6
forward current i f 30 ma luminous intensity ---- ---- ---- ---- note : 1.the forward voltage data did not including ? 0.1v testing tolerance. 2. the luminous intensity data did not including ? 15% testing tolerance. 1.7 32 viewing angle 2 c 1/2 peak wavelength spectral line half-width dominant wavelength forward voltage fd v f ??f f p iv 140 ---- deg if=20ma ---- 595 nm 2.6 ---- 15 ---- nm v 598 ---- 80 ---- nm mcd if=20ma if=20ma if=20ma if=20ma if=20ma min. typical electrical & optical characteristics (ta=25 j ) soldering temperature tsol items symbol storage temperature operating temperature reverse current @5v electrostatic discharge tstg t opr ir esd max 260 j for 5 sec max condition max. typ. unit -40 ~ +85 -40 ~ +90 10 2000 j j g a v ligitek electronics co.,ltd. property of ligitek only absolute maximum ratings at ta=25 j parameter peak forward current duty 1/10@10khz power dissipation i fp pd symbol 78 60 ratings ma mw unit page 3/10 part no. LG-150HY-CT
fig.3 forward voltage vs. temperature ambient temperature( j ) forward voltage@20ma normalize @25 j fig.4 relative intensity vs. temperature ambient temperature( j ) relative intensity@20ma normalize @25 j typical electro-optical characteristics curve forward voltage(v) fig.1 forward current vs. forward voltage forward current(ma) forward current(ma) fig.2 relative intensity vs. forward current relative intensity normalize @20ma ligitek electronics co.,ltd. property of ligitek only 1.0 0.1 1.0 10 100 1000 1.0 10 100 1000 0.0 0.5 1.0 1.5 2.0 2.5 3.0 -40 -20 0 20 40 60 1.0 1.1 1.2 1.5 2.0 2.5 3.0 80 100 0.8 0.9 -20 -40 40 20 080100 60 2.0 0.0 0.5 1.0 1.5 2.5 3.0 hy chip page 4/10 part no. LG-150HY-CT fig.6 directive radiation relative intensity@20ma 550 wavelength (nm) 500 0.0 0.5 600 650 fig.5 relative intensity vs. wavelength 1.0
label aluminum moist-proof bag label LG-150HY-CT part no. 8.0mm tape,7"reel description packing specifications ?e note : the tolerances unless mentioned is ? 0.1mm,angle ? 0.5. unit=mm. 3000 devices quantity/reel ligitek electronics co.,ltd. property of ligitek only carrier type dimensions page 5/10 part no. LG-150HY-CT 5.3 8.00.3 3.38 3.50.2 polarity 1.76 4.00.2 1.36 1.75 4.00.2 1.5 2.0 0.23
??1qlu~a?|3--?q ligitek electronics co., ltd. lot no. : 93000387 bin/hue : q/17 q'ty(pcs) : 3000 pcs part no. : LG-150HY-CT ligitek led bin : luminous intensity hue : dominant wavelength 1.8 - 2.0 : forward voltage 1.8 - 2.0 reel dimensions label explanation 9.0 ? 1.0 12.0 ? 1.0 6.0 ? 1.0 178 ? 1.5 r 13.5 ? 1.0 0.4 0.6 0.8 0.2 0.2 0.6 0.8 0.4 2.0 ? 0.5 page 6/10 part no. LG-150HY-CT
3. 10 inner boxes / carton 4. carton size : l x w x h 49cm x 46cm x 29cm l w h box explanation 1. 5 bag / inner box 2. inner box size : l x w x h 23cm x 8.5cm x 26cm h l w ligitek electronics co.,ltd. property of ligitek only page 7/10 part no. LG-150HY-CT
rising +5 j /sec cooling -5 j /sec reflow soldering should not be done more than two times. 120 sec.max. 5sec 1~5 c/sec 3-2 pb-free reflow solder preheat 180~200 c 1~5 c/sec 60 ~ 120 sec preheat 120 150 260 c max. 10sec.max above 220 c 60 sec.max. time 120 ~ 180 sec soldering heat max. 260 j temp. ( j ) 3-1. lead reflow solder 240 120 ~ 150 j 2. wave solder preheat 245 ? 5 j within 5 sec ligitek electronics co.,ltd. property of ligitek only 1. hand solder basic spec is ?? 280 j 3 sec one time only. recommended soldering conditions page 8/10 part no. LG-150HY-CT
esd(electrostatic discharge): static electricity or power surge will damage the led. use of a c onductive wrist band or anti-electrosatic glove is recommended when handing these led. all devices, equipment and machinery must be properly grounded. (a) recommended circuit. (b) the difference of brightness between led could be f ound due to the vf-if characteristics of led. cleaning: use alcohol-based cleaning solvents such as isopropyl alc ohol to clean the led. circuit model a led circuit model b led precautions for use: storage time: 1.the operation of temperatures and rh are : 5 j ~35 j ,rh60%. 2.once the package is opened, the products s hould be used within a week. otherwise, they should be kept in a damp proof box with descanting agent. considering the tape life, we suggest our customers to use our pr oducts within a year(from production date). 3.if opened more than one week in an atmos phere 5 j ~ 35 j ,rh60%, they should be treated at 60 j? 5 j fo r 15hrs. drive method: led is a current operated device, and therefore, require r some kind of current limiting incorporated into the driver circuit. this current limiting typically takes the form of a current limiting resistor placed in series with the led. consider worst case voltage variations than could occur across the current limiting resistor. the forwrd current should not be allowed to c hange by more than 40 % of its desired value. ligitek electronics co.,ltd. property of ligitek only page 9/10 part no. LG-150HY-CT
environmental test ir reflow 1.t=260 c max. 10sec.max. 2. 6 min 1.105 j ~ 25 j ~ - 55 j ~ 25 j 30mins 5mins 30mins 5mins 2.10 cyeles 1.t.sol=235 j? 5 j 2.immersion time 2 ? 0.5sec 3.coverage ? 95% of the dipped surface temperature cycling solderability test mil-std-750d:2031.2 j-std-020 mil-std-202f: 107d mil-std-750d: 1051 mil-std-883d: 1010 jis c 7021: a-4 mil-std-202f: 208d mil-std-750d: 2026 mil-std-883d: 2003 iec 68 part 2-20 jis c 7021: a-2 ligitek electronics co.,ltd. property of ligitek only endurance test classification 1.ta=65 j? 5 j 2.rh=90 %~95% 3.t=1000hrs ? 2hrs 1.ta=105 j? 5 j &-40 j? 5 j (10min) (10min) 2.total 10 cycles 1.ta=-40 j? 5 j 2.t=1000 hrs (-24hrs, + 72hrs) high temperature high humidity storage test thermal shock test low temperature storage test 1.ta=under room temperature as per data sheet maximum rating. 2.if=20ma 3.t=1000 hrs (-24hrs, + 72hrs) 1.ta=105 j? 5 j 2.t=1000 hrs (-24hrs, + 72hrs) high temperature storage test operating life test test item test condition reliability test: mil-std-202f:103b jis c 7021: b-11 mil-std-202f: 107d mil-std-750d: 1051 mil-std-883d: 1011 jis c 7021: b-12 mil-std-750d: 1026 mil-std-883d: 1005 jis c 7021: b-1 mil-std-883d:1008 jis c 7021: b-10 reference standard page 10/10 part no. LG-150HY-CT

▲Up To Search▲

Price & Availability of LG-150HY-CT

	To Download LG-150HY-CT Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .