(800) tms-coax ? www.timesmicrowave.com 82 times microwave systems lmr ? -400-llpl flexible low loss plenum coax LMR-400-LLPL part description stock part number application jacket color code LMR-400-LLPL indoor/outdoor plenum frpvc orange 54070 cmp/ft6 ? lmr ? - llpl is an indoor highly fre retarded cable intended specifcally for runs within return air handling plenums (e.g. dropped ceilings, raised foors). it has a ul/nec & csa rating of cmp and ft6 respectively. ? flexibility and bendability are hallmarks of the lmr- 400-llpl cable design. the fexible outer conductor enables the tightest bend radius available for any cable of similar size and performance. ? low loss is another hallmark feature of lmr-400- llpl. size for size lmr has the lowest loss of any fexible cable and comparable loss to semirigid hard-line cables. ? rf shielding is 50 db greater than typical single shielded coax (40 db). the multi-ply bonded foil outer conductor is rated conservatively at > 90 db (i.e. >180 db between two adjacent cables). ? weatherability : LMR-400-LLPL cables are designed for indoor plenum applications. black jacketed lmr- llpl versions can be supplied for applications that originate outdoors (e.g., rooftop) and subsequently enter the building. ideal for ? indoor plenum feeder runs ? ul/nec/csa rated cmp/ft6 ? any wireless application (e.g. lmds, mmds, wll, gps, lmr, wlan, wisp, wimax, scada, cellular, pcs, paging) requiring an easily routed, low loss rf cable for in-building systems construction specifcations description material in. (mm) inner conductor solid bccai 0.095 (2.41) dielectric low density ptfe 0.285 (7.24) outer conductor aluminum tape 0.291 (7.39) overall braid tinned copper 0.320 (8.13) jacket orange frpvc 0.405 (10.29) ? connectors : a variety of connectors are available for LMR-400-LLPL cable, including the most common interface types. most employ crimp outer attachment using standard hex crimp sizes. ? cable assemblies : all LMR-400-LLPL cable types are available as pre-terminated cable assemblies. refer to the section on flextech for further details.
(800) tms-coax ? www.timesmicrowave.com 83 times microwave systems LMR-400-LLPL electrical specifcations performance property units us (metric) velocity of propagation % 76 dielectric constant na 1.73 time delay ns/ft (ns/m) 1.34 (4.40) impedance ohms 50 capacitance pf/ft (pf/m) 26.7 (87.6) inductance uh/ft (uh/m) 0.067 (0.22) shielding effectiveness db >90 dc resistance inner conductor ohms/1000ft (/km) 1.8 (5.9) outer conductor ohms/1000ft (/km) 1.65 (5.4) voltage withstand volts dc 2500 jacket spark volts rms 8000 peak power kw 16 environmental specifcations performance property 0 f o c installation temperature range +23/+167 -5/+75 storage temperature range +23/+167 -5/+75 operating temperature range +23/+167 -5/+75 attenuation vs. frequency (typical) attenuation (db per 100 feet) 10.0 1.0 0.1 frequency (mhz) 0 100 1,000 10,000 mechanical specifcations performance property units us (metric) bend radius: installation in. (mm) 1.00 (25.4) bend radius: repeated in. (mm) 4.0 (101.6) bending moment ft-lb (n-m) 0.5 (0.68) weight lb/ft (kg/m) 0.114 (0.17) tensile strength lb (kg) 120 (54.5) flat plate crush lb/in. (kg/mm) 185 (3.31) calculate attenuation = (0.129140) ? fmhz + (0.000150) ? fmhz (interactive calculator available at http:// www.timesmicrowave.com/cable_calculators) attenuation: vswr=1.0 ; ambient = +25c (77f) power: vswr=1.0; ambient = +40c; jacket = +75c (167f); sea level; d ry air; atmospheric pressure; no solar loading frequency (mhz) 30 50 150 220 450 900 1500 1800 2000 2500 3400 5800 attenuation db/100 ft 0.7 0.9 1.6 1.9 2.8 4.0 5.2 5.7 6.1 6.8 8.0 10.7 attenuation db/100 m 2.3 3.0 5.3 6.4 9.2 13.2 17.1 18.9 19.9 22.4 26.4 35.1 avg. power kw 3.33 2.57 1.48 1.22 0.84 0.59 0.45 0.41 0.39 0.34 0.29 0.22
(800) tms-coax ? www.timesmicrowave.com 84 times microwave systems lmr ? -400-llpl flexible low loss plenum coax LMR-400-LLPL part stock type number code description ground kit gk-s400tt gk-s400tt standard grounding kit (each) hoisting grip hg-400t hg-400t laced type (each) hardware accessories connectors inner outer finish* part stock vswr ** coupling contact contact body length width weight interface description number code freq. (ghz) nut attach attach /pin in (mm) in (mm) lb (g) n female straight jack tc-400-nf-pl 3190-964 <1.25:1 (2.5) na solder crimp n/g 1.8 (45) 0.66 (16.8) 0.105 (47.6) n male straight plug ez-400-nmh-pl-d 3190-602 <1.25:1 (2.5) hex/knurl spring finger crimp a/g 1.5 (38) 0.89 (22.6) 0.113 (51.3) straight plug tc-400-nmh-pl 3190-759 <1.25:1 (2.5) hex solder crimp s/g 1.5 (38) 0.89 (22.6) 0.113 (51.3) right angle tc-400-nmh-ra 3190-422 <1.35:1 (6) hex solder crimp s/g 1.8 (46) 1.25 (31.8) 0.130 (59.0) * finish metals: n=nickel, s=silver, g=gold, ss=stainless steel, a=alballoy **vswr spec based on 3 foot cable with a connector pair hg-400t gk-s400tt tc-400-nf-pl tc-400-nmh-ra tc-400-nmh-pl ez-400-nmh-pl-d
(800) tms-coax ? www.timesmicrowave.com 85 times microwave systems tk-400ez hx-4 cst-400 y1719 dbt-u ct-400/300 rb-cst LMR-400-LLPL cct-01 install tools part stock type number code description crimp tool hx-4 3190-200 crimp handle crimp dies y1719 3190-202 .429" hex dies crimp tool ct-400/300 3190-666 crimp tool for lmr 400 connectors crimp rings cr-400 3190-830 crimp rings for tc/ez-400 connectors (package of 10) strip tool cst-400 3192-004 combination prep tool for lmr-400 crimp and clamp connectors mid-span strip tool gst-400 3190-2174 for ground strap attachment deburr tool dbt-u 3192-001 removes center conductor rough edges cutting tool cct-01 3190-1544 cable end fush cut tool replacement blade rb-01 3190-1609 replacement blade for cutting tool replacement kit rb-cst 3192-086 replacement kit for all cst strip tools tool kit tk-400ez 3190-1602 tool kit for lmr-400 crimp/clamp connectors (includes cct-01, cst-400, ct-400/300, tool pouch) gst-400
|
