power entry modules without line filter kg www.schurter.com/pg0 5 connectors iec appliance inlet c14 with fuseholder 1- or 2-pole, line switch 1- or 2-pole and voltage selector medical fuse drawer c14 70 c description - panel mount: screw-on version from front or rear side, snap-in version from front side - 4 functions: appliance inlet, protection class i line switch, 1- or 2-pole fusehol - der with interchangeable fuse drawer for fuse-links 5 x 20 mm or 6.3 x 32 mm, voltage selectors - quick connect terminals 4.8 x 0.8 mm approvals - vde certificate number: 40030343 - ul file number: e93617 - csa file number: 38456 characteristics - all single elements are already partially wired - for added safety "extra-safe" fuse drawers are available fuse drawer meets requirements of medical standard iec/en 60601-1 the fuse drawer can only be opened with the aid of a tool the fuseholder is accessible from the equipment front - qualified for use in equipment according iec/en 60950 other versions on request - line switch, illuminated - line switch with other rocker marking - line switch 1-pole - for protection class ii references alternative: version with line filter c g weblinks pd f , general product informatio n , approval s , roh s , china-roh s , mating connector s , e-stor e , schurter-stock-chec k , distributor- stock-chec k , accessorie s newly available variants corresponding to v-lock mating cordset. the connector is equipped with a notch intended for use with the latching cordset. the cord latching system prevents against accidental removal of the cordset. technical data ratings iec 10 a / 250 vac; 50 hz ratings ul/csa 10 a / 125 vac; 60 hz dielectric strength > 3 kvac between l-n > 4 kvac between l/n-pe (1 min/50 hz) allowable operation temp. -25 c to 70 c degree of protection from front side ip 40 acc. to iec 60529 protection class suitable for appliances with protection class 1 acc. to iec 61140 terminal quick connect terminals 4.8 x 0.8 mm panel thickness s screw: max 8 mm mounting screw torque max 0.5 nm snap-in: 1.5/2/2.5 mm material: housing thermoplastic, black, ul 94v-0 appliance inlet c14 acc. to iec/en 60320-1, ul 498, csa c22.2 no. 42 (for cold conditions) pin-temperature 70 c, 10 a, protection class 1 fuseholder 1 or 2 pole, shocksafe category pc2 acc. to iec 60127-6, for fuse-links 5 x 20 or 6.3 x 32 mm rated power acceptance @ ta 23 c 5 x 20: 2.5 w (1 pole)/ 2 w (2-pole) per pole 6.3 x 32: 3.15 w (1 pole)/ 2.5 w (2-pole) per pole power acceptance @ ta > 23c admissible power acceptance at hig - her ambient temperature see derating curves line switch rocker switch 2-pole, non-illuminated, acc. to iec 61058-1 technical detail s voltage selectors series-parallel, 4, 3 or 2 switch positions or usable as 2-pole change-over switch
power entry modules without line filter kg www.schurter.com/pg0 5 connectors dimensions 97 mm screw on pcb mounting 79.7 89 30 55 4.8x0.8 r 4.5 r 6 r 3.1 80 +0.3 0 0.15 97 18 30 27.2 ? 3.2 ? 6.3x90? 27.5 +0.2 0 r 3 0 -0.2 89 230 2.2 2 m3/? 3.6 snap-in mounting 79.7 30 55 4.8x0.8 r 4.5 r 3.1 80 +0.3 0 82.5 18 30 27.2 s 27.5 +0.2 0 r 3 0 -0.2 230 2.2 2 0.1 diagrams with partial wired 1-pole with partial wired 2-pole derating curves fuses 5 x 20 mm (1-pole) admissible power acceptance in watt 1.5 1.0 0.5 0.0 2.5 2.0 0 2 0 4 0 6 0 8 0 100 i = < < i n i = 0.7 i n i = 1.0 i n ambient air temperature ta c fuses 5 x 20 mm (2-pole, per pole) admissible power acceptance in watt per pole 0 2 0 4 0 6 0 8 0 100 i = < < i n i = 0.7 i n i = 1.0 i n 2.0 1.5 1.0 0.5 0.0 ambient air temperature ta c fuses 6.3 x 32 mm (1-pole) admissible power acceptance in watt 0 2 0 4 0 6 0 8 0 1 00 1.5 1.0 0.5 0.0 2.5 3.15 2.0 i = < < i n i = 0.7 i n i = 1.0 i n ambient air temperature ta c fuses 6.3 x 32 mm (2-pole, per pole) admissible power acceptance in watt per pole 1.5 1.0 0.5 0.0 2.5 2.0 0 2 0 4 0 6 0 8 0 100 i = < < i n i = 0.7 i n i = 1.0 i n ambient air temperature ta c
power entry modules without line filter kg www.schurter.com/pg0 5 connectors variants partial wired fuse drawer and voltage selector insert must be ordered separately type panel mounting panel thickness s [mm] fuseholder line switch order number kg screw - 1-pole rocker switch kg16.5101.151 kg screw - 2-pole rocker switch kg10.6101.151 kg snap-in 1.5 1-pole rocker switch kg16.5101.105 kg snap-in 2 1-pole rocker switch kg16.5101.107 kg snap-in 2.5 1-pole rocker switch kg16.5101.109 kg snap-in 1.5 2-pole rocker switch kg10.6101.105 kg snap-in 2 2-pole rocker switch kg10.6101.107 kg snap-in 2.5 2-pole rocker switch kg10.6101.109 packaging unit 20 pcs required accessor y description jumper wire 1 connection with stranded cable type a, 70 0881.0074 type a, 100 0881.0075 type b, 70 0881.0076 type b, 100 0881.0077 fusedrawer 1 fusedrawer for fuse links 5x20mm resp.. 6.3x32mm 5 x 20, 2-pole 4305.0001 5 x 20, 1-pole 4305.0006 6.3 x 32, 2-pole 4305.0011 6.3 x 32, 1-pole 4305.0016 ... voltage selectors insert 1 voltage selector insert to ke, ce, kg, cg 3 or 4 switch positions 4305.0048.00 1, 3 or 4 switch positions, 100, 120, 220, 240 4305.0048.01 3, 3 or 4 switch positions, 130, 110, 240, 220 4305.0048.02 2, 2 switch positions, 110, 220 4305.0048.03 ...
power entry modules without line filter kg www.schurter.com/pg0 5 connectors accessorie s assorted cover s rear cover 0859.0109 cord retaining kit s cord retaining strain relief flat head, a 4700.0001 mating outlets/connector s category / description appliance outletoverview complet e iec appliance outlet f, screw-on mounting, front side, solder terminal 478 7 iec appliance outlet f, snap-in mounting, front side, solder or quick-connect terminal 478 8 iec appliance outlet f or h, screw-on mounting, front side, solder, pcb or quick-connect terminal 509 1 iec appliance outlet f or h, screw-on mounting, front side, solder or quick-connect terminal 509 2 appliance outletfurther types tok g connectoroverview complet e iec connector c15, rewireable, straight 010 1 iec connector c15a, rewireable, straight 010 2 iec connector c15a, rewireable, straight 0102- g iec connector c15a, rewireable, angled 011 2 iec connector c13, rewireable, angled 401 2 connectorfurther types tok g ... power cordoverview complet e power cord with iec connector c13, angled 031 1 power cord with iec connector c13, angled 301 1 power cord with iec connector c13, angled 301 2 power cord with iec connector c13, angled 301 3 power cord with iec connector c13 302 0 power cordfurther types tok g ... the specifications, descriptions and illustrations indicated in this document are based on current information. all content is subject to modifications and amendments.
|
