patented GF10AH thru gf10yh surface mount glass passivated junction rectifier reverse voltage - 50 to 1600 volts forward current - 1.0 ampere features mechanical data * halogen-free type * gprc (glass passivated rectifier chip) inside * glass passivated cavity-free junction * ideal for surface mount automotive applications * built-in strain relief * easy pick and place * high temperature soldering guaranteed: 260 o c/10 seconds, at terminals * plastic package has underwriters laboratory flammability classification 94v-0 case : jedec do-214ac molded plastic over passivated chip terminals : tin plated, solderable per mil-std-750, method 2026 polarity : color band denotes cathode end weight : 0.002 ounes , 0.064 gram maximum ratings and electrical characteristics ratings at 25 o c ambient temperature unless otherwise specified. maximum repetitive peak reverse voltage maximum average forward rectified current (see fig.1) peak forward surge current 8.3ms single half sine-wave superimposed on rated load (jedec method) maximum instantaneous forward voltage at 1.0 a maximum dc reverse current at rated dc blocking voltage t a =25 o c t a =125 o c t a =150 o c typical junction capacitance (note 1) typical thermal resistance (note 2) operating junction and storage temperature range symbols v rrm i (av) i fsm v f i r c j r ja t j ,t stg gf10 ah bh dh gh jh kh mh qh yh 50 100 200 400 600 800 1000 1200 1600 1.0 30 1.0 1.25 5 30 50 5 50 - 12 56 r jl 14 -65 to +175 units volts maximum rms voltage v rms 35 70 140 280 420 560 700 840 1120 volts maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 1200 1600 volts volts amps amps ua pf o c / w o c notes : (1) measured at 1.0 mhz and applied reverse voltage of 4.0 volts (2) thermal resistance from junction to ambient and from junction to lead p.c.b. mounted on 0.2 x 0.2" (5.0 x 5.0mm) copper pad areas sma/do-214ac *dimensions in inches and (millimeters) patented patented tm zowie technology corporation rev. 0 0.114(2.90) 0.098(2.50) 0.096(2.44) 0.079(2.00) 0.059(1.52) 0.030(0.76) 0.012(0.305) 0.006(0.152) 0.181(4.60) 0.157(4.00) max. 0.203 0.063(1.60) 0.047(1.20) 0.208(5.28) 0.189(4.80)
ratings and characteristic curves GF10AH thru gf10yh fig.1 - forward current derating curve fig.3 - typical instantaneous forward characteristics average forward rectified current, amperes 1.50 1.25 1.00 0.75 0.50 0.25 iinstantaneous forward current, amperes 0.10 1.00 10.00 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 0 25 50 75 100 125 150 175 60hz resistive or inductive load pulse width=300us 1% duty cycle lead temperature, o c instantaneous forward voltage, volts gf10q & gf10y gf10a~gf10m fig.2 - maximum non-repetitive peak forward surge current peak forward surge current, amperes number of cycles at 60hz 8.3ms single half sine-wave (jedec method) 0 10 15 20 25 30 1 10 100 fig.4 - typical reverse characteristics percent of rated peak reverse voltage,% instantaneous reverse leakage current, microamperes 0.1 transient thermal impedance( o c/w) 0.1 1 10 100 0 20 1 10 100 tj=25 o c tj=25 o c tj=125 o c tj=150 o c 40 60 80 100 110 fig.5 - typical junction capacitance fig.6 - typical transient thermal impedance reverse voltage, volts .1 1 junction capacitance, pf 40 200 .2 .4 1.0 2 4 10 20 40 100 t , pulse duration, sec 100 10 1.0 0.10 0.01 2 4 10 6 20 60 100 zowie technology corporation rev. 0
|