www.advantech.com/products online download features pme-1210 1-phase multifunction power meter specifcations voltage measurement ? voltage 80 ~ 350 v ac ? resolution/accuracy 0.1v/0.5% full scale ? permanet overload 450 v ac ? transient voltage 2 x vin (1sec) current measurement (std. 5a ct) ? range 5 ma ~ 5 a ? resolution 1 ma ? starting current 5 ma ? permanent overload 10 a ? transient current 20 x iin (1sec) ? accuracy 0.5% full scale power measurement ? resolution 1w ? accuracy 1% full scale energy measurement ? display resolution 0.1 kwh (range from 0 to 9,999,999.9kwh) ? record resolution 0.01 kwh (range from 0 to 9,999,999.99kwh) ? kwh accuracy 1% with pf 0.5 ~ 1.0 frequency measurement ? range 45.0 to 65.0 hz ? resolution/accuracy 0.1 hz pf measurement ? range 0.000 to 1.000 ? resolution 0.001 (polarized) ? accuracy 1% (pf 0.5 ~ 1.0) front panel interface ? display 6 digit 7 segment led ? indicators 8 led ? mode display and setting ? setting 3 function key, id address, baud rate, pt ratio, ct ratio communication interface ? bus rs-485, photo isolated ? protocol modbus/rtu (format: 8/n/1) ? baud rate 1200/2400/4800/9600 ? meter id 0 ~ 254 reliability ? communication iec61000-4-4 1 kv ? surge test iec61000-4-5 4 kv ? eft test iec61000-4-4 1 kv ac insulation ? aux. power 4.0 kv ? current input 4.0 kv power supply ? ac 110v 93 ~ 126 v ac ? ac 220v 187 ~ 253 v ac physical ? operating temperature -10 ~ 70c (32 ~ 158f) ? operating humidity 0 ~ 90% rh non-condensing ? storage humidity 0 ~ 95% (non-condensing) ? weight 425g (std. 5a ct) ? panel cut 92 x 46 mm ? dimensions (w x h x d) 110 x 50 x 115 mm ordering information ? PME-1210-AE 1-phase multifunction power meter ? small size with 100mm depth ? panel cut 92 x 46 mm ? multi-function power measurement ? modbus rtu protocol over rs-485 introduction the pme-1210 is a 1-phase multi-function power meter for sub-metering applications, ranging from power distribution, small motor control to lighting load circuit. it measures current & voltage, kw, kwh, kwh and pf values. the measurement data can be viewed directly from local display, and also can be transmitted through a rs-485 using the modbus protocol. new rohs compliant 2002/95/ec 4-19 8 5 4 4 10 serial communication cards 9 device servers & gateways 8 industrial ethernet 7 industrial monitors 6 automation panel pcs operator panels building automation systems 3 energy automation 2 hazardous location 1 motion control 11 embedded auto. computers 12 pacs 13 m2m i/o 14 distributed nano controllers 15 rs-485 i/o 16 automation software ethernet i/o 17 daq boards 18
|