infrared detector modules operate just by connecting to a dc power supply. the detector element is selectable from among ingaas , pbs, pbse, mct, inas and insb, which are all combined with a thermoelectric cooler. p4631-10 using an mct detector is especially suited fo r co 2 laser detection. we welcome requests for custom devices that suit your application. features l high s/n l compact size l easy to use operates just by connecting to dc power supply l circuit design optimized for detector element characteristics l built-in thermoelectric cooling control circuit (fixed control temperature) applications l infrared detection l co 2 laser detection infrared detector infrared detector module with preamp easy-to-use detector module with built-in preamp thermoelectrically cooled type accessories (supplied) l dc power cable (2 m) l instruction manual 1 specifications / absolute maximum ratings absolute maximum ratings active area rated input voltage input voltage operating temperature topr storage temperature tstg type no. detector element (mm) (v) (v) (c) (c) g6122 1 g6122-03 1 g6126 ingaas 5 p4638 pbs 4 5 p4639 pbse 3 3 p4631 mct 1 1 p4631-02 inas 1 +2.5 +1 -0.05 vp 1 =+5 p4631-03 insb 1 1 p4631-04 4.5 0.25 vp 2 =+7 p4631-10 mct 1 1 15 0.5 +2.5 +1 -0.05 vc=18 vp 1 =+5 0 to +40 -20 to +50 electrical and optical characteristics (typ. ta=25 c) detector element temperature at rated input t peak sensitivity wavelength p cut-off wavelength c photo sensitivity s = p * 1 nep = p frequency response -3 db output impedance maximum output voltage r l =1 k ? maximum current consumption* 2 (ma) type no. (c) (m) (m) (v/w ) (w /hz 1/2 ) (hz) ( ? ) (v) +vc, -vc vp 1 or vp 2 g6122 1.95 2.05 1.7 10 8 1 10 -13 dc to 2.2 k +10 +60, -30 +1100 g6122-03 2.3 2.56 1.5 10 8 6 10 -13 dc to 3 k +10 +60, -30 +1100 g6126 1.55 1.66 5 10 7 7 10 -14 dc to 1.2 k +10 +50, -30 +1100 p4638 2.4 3.1 8 10 7 1 10 -12 0.2 to 300 10 +50, -20 +1100 p4639 -15 4.1 5.0 2 10 5 1 10 -10 0.2 to 10 k 10 +50, -20 +1100 p4631 -25 3.6 4.3 2 10 7 1 10 -12 5 to 20 k 2.5 +60, -10 +1100 p4631-02 -28 3.25 3.45 1 10 7 4 10 -12 5 to 120 k 8 +60, -10 +1100 p4631-03 4.5 6.3 1.5 10 5 1.5 10 -11 dc to 100 k +10 +90, -30 +1100 p4631-04 -58 4.8 5.5 1 10 7 5 10 -12 5 to 35 k 5 +80, -10 +1100 p4631-10 -3 6.5 11.5 2 * 3 3.5 10 -7 * 3 dc to 500 k 50 +10 +150, -30 +1400 *1: f=100 hz (g6122, g6122-03, g6126, p4638), f=600 hz (p4639, p4631-10), f=1.2 khz (p4631, p4631-02, p4631-03, p4631-04) *2: vc=15 v, vp 1 =2.5 v or vp 2 =4.5 v recommended dc power supply (analog power supply): e3630a (agilent technologies) current capacity: more than 1.5 times the maximum current consumption ripple noise: 5 mvp-p or less (15 v power supply) 5 mvp-p or less (+2.5 v, +4.5 v power supply) *3: =10.6 m
infrared detector module with preamp thermoelectrically cooled type spectral response wavelength (m) d * (cm hz /w) 1 2 16 10 5 10 7 10 11 10 13 10 9 10 8 10 12 10 6 10 10 2345 7 12 8 9 10 11 (typ.) g6126 p4638 p4639 g6122-03 g6122-03 g6122-03 p4631-03 p4631-10 p4631-04 p4631 g6122 p4631-02 kirdb0188ee dimensional outlines (unit: mm) 27.2 75.2 2 26.5 12 (4 ) m3 depth 5 (mounting threaded hole) bnc connector (signal output) 6-pin connector (voltage input) 0.7 0.4 20 75.2 3.3 0.2 photosensitive surface 45 40 20 26 26 (4 ) 3.2 depth 14.5 + m3 depth 5 (mounting threaded hole) active area g6122/-03, g6126, p4638, p4639, p4631/-02 kirda0009ee 2
infrared detector module with preamp thermoelectrically cooled type 45 45 (4 ) m3 depth 5 (mounting threaded hole) bnc connector (signal output) 6-pin connector (voltage input) 34 (4 ) 3.2 depth 24.5 + m3 depth 5 (mounting threaded hole) 31 77 active area 20 3 8 66.5 0.2 0.4 4.6 0.5 photosensitive surface 66 132.5 12 26.5 64.5 62 2 20 offset adjustment screw 45 45 (4 ) m3 depth 5 (mounting threaded hole) bnc connector (signal output) 6-pin connector (voltage input) 34 (4 ) 3.2 depth 24.5 + m3 depth 5 (mounting threaded hole) 31 77 20 3 8 66.5 0.2 0.4 4.6 0.5 photosensitive surface 50 116.5 12 26.5 64.5 46 2 20 active area kirda0137ec kirda0138ec p4631-03 p4631-04 (unit: mm) 3
hamamatsu photonics k.k., solid state division 1126-1 ichino-cho, higashi-ku, hamamatsu city, 435-8558 japan, telephone: (81) 53-434-3311, fax: (81) 53-434-5184, www.hamamats u.com u.s.a.: hamamatsu corporation: 360 foothill road, p.o.box 6910, bridgewater, n.j. 08807-0910, u.s.a., telephone: (1) 908-231-0 960, fax: (1) 908-231-1218 germany: hamamatsu photonics deutschland gmbh: arzbergerstr. 10, d-82211 herrsching am ammersee, germany, telephone: (49) 8152- 375-0, fax: (49) 8152-265-8 france: hamamatsu photonics france s.a.r.l.: 19, rue du saule trapu, parc du moulin de massy, 91882 massy cedex, france, teleph one: 33-(1) 69 53 71 00, fax: 33-(1) 69 53 71 10 united kingdom: hamamatsu photonics uk limited: 2 howard court, 10 tewin road, welwyn garden city, hertfordshire al7 1bw, unit ed kingdom, telephone: (44) 1707-294888, fax: (44) 1707-325777 north europe: hamamatsu photonics norden ab: smidesv ? gen 12, se-171 41 solna, sweden, telephone: (46) 8-509-031-00, fax: (46) 8-509-031-01 italy: hamamatsu photonics italia s.r.l.: strada della moia, 1 int. 6, 20020 arese, (milano), italy, telephone: (39) 02-935-81 -733, fax: (39) 02-935-81-741 information described in this material is current as of february, 2011. product specifications are subject to change without pr ior notice due to improvements or other reasons. before assembly into final products, please contact us for the delivery specification sheet to check the latest information. type numbers of products listed in the delivery specification sheets or supplied as samples may have a suffix "(x)" which means preliminary specifications or a suffix "(z)" which means developmental specifications. the product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovere d and reported to us within that one year period. however, even if within the warranty period we accept absolutely no liability for any loss caused by natural disasters or improper product use. copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission. infrared detector module with preamp thermoelectrically cooled type cat. no. kird1036e13 feb. 2011 dn 27.2 92 2 26.5 12 (4 ) m3 depth 5 (mounting threaded hole) bnc connector (signal output) 6-pin connector (voltage input) 0.7 0.4 20 offset voltage adjustment screw 92 4.85 0.2 photosensitive surface 45 40 20 26 26 (4 ) 3.2 depth 14.5 + m3 depth 5 (mounting threaded hole) active area kirda0139ec the infrared detector modules (te-cooled type) do not operate if not cooled. always supply +2.5 v or +4.5 v to cool the detector element. handling precaution p4631-10 (unit: mm) 4 the g6122, g6122-03, g6126, p4638 and p4631-10 conform to european emc directives: en 61326 class b.
|
