View LQ104S1LG21_4940137.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

0 2/$5#4 3 0%#)&)#!4)/.3 !6#,iquid#rystal$isplays'roup ,1 104s1lg21 4&4 ,#$-odule 3pec)ssue$ate feb. 7 6 .o, d 18203a

4'%14&51(4'8+5+10 .35.) 52'%0q &#6' 4'8+5'& 57//#4; 016' 0q 2#)' .&# feb uv+uuwg
ld18203a- 1. application this specification applies to color tft-lcd module, LQ104S1LG21 these specification sheets are the proprietary product of sharp corporation(?sharp) and include materials protected under copyright of sharp. do not reproduce or cause any third party to reproduce them in any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express written permission of sharp. the device listed in these specification sheets was designed and manufactured for use in general electronic equipment. in case of using the device for applications such as control and safety equipment for transportation (aircraft, trains, automobiles, etc.), rescue and security equipment and various safety related equipment which require higher reliability and safety, take into consideration that appropriate measures such as fail-safe functions and redundant system design should be taken. do not use the device for equipment that requires an extreme level of reliability, such as aerospace applications, telecommunication equipment (trunk lines), nuclear power control equipment and medical or other equipment for life support. sharp assumes no responsibility for any damage resulting from the use of the device which does not comply with the instructions and the precautions specified in these specification sheets. contact and consult with a sharp sales representative for any questions about this device.
ld18203a- 2. overview this module is a color active matrix lcd module incorporating amorphous silicon tft (thin film transistor). it is composed of a color tft-lcd panel, driver ics, control circuit, power supply circuit and a backlight unit. graphics and texts can be displayed on a 800 x 3 x 600 dots panel with 262,144 colors by using lvds (l ow v oltage d ifferential s ignaling) system for interface and supplying +3.3v dc supply voltage for tft-lcd panel driving. this module is super-high brightness (350cd/m^2). this module is the type of wide viewingangle the viewing angle is 6 o?clock direction. backlight-driving dc/ac inverter is not built in this module. 3. outline specifications parameter specifications unit display size 26 (10.4") diagonal cm active area 211.2(h) ? 158.4(v) mm pixel format 800 (h ) x 600 (v) pixel (1 pixel=r+g+b dots) number of colors (number of gray scale level) 262, 144 colors
64 gray scales per color pixel pitch 0.264(h) ? 0.264(v) mm pixel configuration r,g,b vertical stripe display mode normally white unit outline dimensions *1 246.5(w) ? 179.4(h) ? 15.5max(d) mm mass 620 max g surface treatment anti-glare and hard-coating 3h [note] excluding backlight cables.
ld18203a- 4. input terminals 4-1. tft-lcd panel driving cn1 (lvds signals , +3.3v dc power supply and contorol signal) corresponding connector:fi-se20me (fpc type) or fi-s20s (wiretype) :/:/:/ jae pin no. symbol function remark 1 v cc +3.3v power supply 2 v cc +3.3v power supply 3 gnd 4 gnd 5 rxin0- differential data input, ch0 (negative) lvds signal 6 rxin0+ differential data input, ch0 (positive) lvds signal 7 gnd 8 rxin1- differential data input, ch1 (negative) lvds signal 9 rxin1+ differential data input, ch1 (positive) lvds signal 10 gnd 11 rxin2- differential data input, ch2 (negative) lvds signal 12 rxin2+ differential data input, ch2 (positive) lvds signal 13 gnd 14 rxclk in- differential clock input (negative) lvds signal 15 rxclk in+ differential clock input (positive) lvds signal 16 gnd 17 r/l horizontal display mode select signal [note1] 18 u/d vertical display mode select signal [note2] 19 gnd 20 gnd [note ] to obtain the proper relation between lvds signals and actual digital data signals, the digital signals should be inputted into the transmitter as described in the nextsection, 4-2. [note 1],[note 2] r/l = high, u/d = low r/l = low, u/d = low r/l = high, u/d = high r/l = low, u/d = high
ld18203a- 100 100 100 100 using receiver 9? single lvds interface, which equals thc63lvdf64a(thine),contained in a control ic corresponding transmitter 9? ds90c363, ds90c363a, ds90c383, ds90c383a
national semiconductor thc63lvdf63a,thc63lvdm63a(thine), sn75lvds84(ti) 4-2 lvds interface block diagram 9? system side 9? ( tft-lcd side) 100 100 100 10uf r0 :* r5 b0 :* b5 hsync v sync enab g0 :* g5 ck lvds transmitter rxin1+ (9pin) rxin1- (8pin) rxin2+ (12pin) rxin2- (11pin) rxclkin+ (15pin) rxclkin- (14pin) lvds receiver controller 9a 9a 9a 9a 9a 9a r/l u/d 10k 10k r0 :* r5 b0 :* b5 hsync vsync enab g0 :* g5 cl k r/l u/d vcc :9?9? rxin0+ (6pin) rxin0- (5pin) 100 100 100 txin18 txin19 txin20 txclk in txin 0 :* 5 txin 6 :* 11 txin12 :* 17 pll digital signal lvds signal rxout18 rxout19 rxout20 rxclk out rxout12 :* 17 rxout6 :* 11 rxout0 :* 5 pll lvds signal digital signal r/l(17pin) u/d(18pin) vcc(1,2pin) gnd gnd gnd(3,4,7,10,13,16,19,20pin) ld18203a-4
ld18203a- [note ] data mapping e[eng ) 4 4 4 4 4 4 4 4 ) $ $ ) ) ) ) ) ) ) $ &' $ $ $ $ $ $ &' 85 *5 4:+0 4:+0 4:+0 4:%.-+0 4-3. backlight driving cn2 ,cn3 used connector : bhr-03vs-1(jst) corresponding connector :sm02(8.0)b-bhs(jst) color of fl cable pin no. symbol function cn2 cn3 1 vhigh power supply for lamp (high voltage side) pink pink 2 nc this is electrically opened. 3 vlow power supply for lamp (low voltage side) white white 5. absolute maximum ratings parameter symbol condition pin name ratings unit remark +3.3v supply voltage vcc ta=25 o c vcc 0 to + 4.0 v input voltage vi1 rxini-/+(i= 0,1,2) ta=25 o c rxclk in-/+ -0.3 to vcc+0.3 vi2 ta=25 o c r/l , u/d -0.3 to vcc+0.3 v storage temperature tstg - 9 -30 to +70 o c [note1] operating temperature topa ambient 9 -10 to +65 o c [note2] lamp input voltage v high 99 0 :* + 2000 : rms [note1]humidity 9? 95%rh max. at ta ? 50 ` . maximum wet-bulb temperature at 39 ` or less at ta>50 ` . 9? no condensation. 9? [note2] humidity 9? 95%rh max. at ta ? 40 ` . maximum wet-bulb temperature at 39 ` or less at ta>40 ` . 9? no condensation. 9?
ld18203a- 6.recommended operation condition parameter symbol min. typ. max. unit remark supply voltage : 9?9? 9 3.0 +3.3 9 3.6 : [note1] lvds signals : l 0 9 2.4 : [note2] input voltage : 9? 0 9 vcc : [note3] ambient temperature :::: -10 9 +65 ` [note4] [note1]on-off conditions for supply voltage 040 o c. no condensation. 7. electrical characteristics 7-1.tft-lcd panel driving ta=25 o c parameter symbol min. typ. max. unit remark current dissipation vcc=+3.3v icc - 310 510 ma [note1] permissive input ripple voltage vrp - - 100 mvp-p input voltage range lvds signal vl 0 - 2.4 v [note2] differential input high vth - - vcm+ 100 mv v cm =1.2v threshold voltage low vtl vcm? 100 - - mv [note3] input impedance (differential input) rt - 100 - [note2] low vil - - 0.8 v [note4] input voltage high vih 2.1 - - [note5] low(vi=0v) iol1 -800 - - input current1 high(vi=vcc) ioh1 -10.0 - 10.0 [note4] low(vi=0v) iol2 -10.0 - 10.0 ua input current2 high(vi=vcc) ioh2 - - 800 ua [note5] [note1] typical current situation : 16-gray-bar pattern. vcc=+3.3v [note2] lvds signals [note3] v cm : common mode voltage of lvds driver. [note4] r/l [note5] u/d t 9 0.3v vcc t1 t 9t 0.9vcc 0.3v vcc t 9 0.9vcc signal signal t 9? 2.7v 2.5v vcc :: 4)$ )5 4)$ )5 4)$ )5 4)$ )5 4)$ )5
ld18203a- 7-2. backlight driving the backlight system is an edge-lighting type with 2 ccft (cold cathode fluorescent tube). the characteristics of single lamp are shown in the following table. (it is usually required to measure under the following condition. i l =6.0ma,ta=25 `r 2 ` , f l =60khz. 9? parameter symbol min. typ. max. unit remark lamp current range il 3.5 6.0 7.0 marms [note1] lamp power consumption pl - 2.8 - w [note2] lamp frequency fl 35 60 70 khz [note3] kick-off voltage vs - - 1450 vrms inverter output [note4] - - (2000) transformer output at barast capacitor =12p ta=-10 o c l l 50000 - - hour [note5] i l= 6.0ma lamp life time l l 30000 99 hour [note5] i l= 7.0ma [note1] lamp current is measured with current meter for high frequency as shown below. [note2] referential data per one ccft by calculation. (i l ? vl) the data don?t include loss at inverter. ( il=6.0marms) [note3] lamp frequency may produce interference w ith horizontal synchronous frequency, and this may cause beat on the display. therefore lamp frequency shall be detached as much as possible from the horizontal synchronous frequency and from the harmonics of horizontal synchronous to avoid interference. [note4] the voltage above this value should be applied to the lamp for more than 1 second to start-up. otherwise the lamp may not be turned on. [note5] since lamp is consumables, the life time written above is referencial value and it is not guaranteed in this specification sheet by sharp. above value is applicable when lamp (the long side of lcd module) is placed horizontally. (landscape position) lamp life time is defined that it applied either or under this condition (continuous turning on at ta=25 o c, il=6.0marms) brightness becomes 50% of the original value under standard condition. kick-off voltage at ta=-10 o c exceeds maximum value,1450vrms. (lamp lifetime may vary if lamp is in portrait position due to the change of mercury density inside the lamp.) in case of operating under lower temp environment, the lamp exhaustion is accelerated and the brightness becomes lower. (continuous operating for around 1 month under lower temp condition may reduce the brightness to half of the original brightness.) in case of such usage under lower temp environment, periodical lamp exchange is recommended. [note6] the performance of the backlight, for example life time or brightness, is much influenced by the characteristics of the dc-ac inverter for the lamp. when you design or order the inverter, please make sure that a poor lighting caused by the mismatch of the backlight and the inverter (miss-lighting, flicker, etc.) never occur. when you confirm it, the module should be operated in the same condition as it is installed in your instrument. be sure to use a back light power supply with the safety protection circuit such as the detection circuit for the excess voltage, excess current and or electric discharge waveform. be sure to use the detect circuit by which one side of the ccft lamps can be controlled independently. otherwise, when one side of the ccft is open, the excess current may possibly be applied to the other side of the lamp. recommended inverter is ? cxa-p1212b-wjl(tdk) ? . [note7] it is required to have the inverter designed so that to allow the impedance deviation of the two ccft lamps and the capacity deviation of barast capacitor. [note8] under the environment of 10lx or less, miss-lighting or lighting delay may occur. module 9 :* : :* transformer output voltage cn2,3 2pin : :* cn2,3 1pin inverter inverter output voltage
ld18203a- 8. timing characteristics of input signals 8-1. timing characteristics (these are specified at the digital inputs/outputs of lvds transmitter/receiver.) c data enab sync d e f a b (vertical timing) item(symbol) min. typ. max. unit ?(( vsync cycle (t va ) - 17.6 - ms negative 628 666 798 line blanking period(t vb ) 28 66 - line vsync pulse width (t vc ) 2 4 6 line back porch (t vd ) 23 23 23 line vsync pulse width+back porch (t vc +t vd ) 25 27 29 line active display area (t ve ) 600 600 600 line front porch (t vf ) 3 39 - line (horizontal timing) item(symbol) min. typ. max. unit remark hsync cycle (t ha ) 20.8 26.4 - us negative 832 1056 - clock blanking period (t hb ) 40 256 - clock hsync pulse width (t hc ) 2 128 200 clock back porch (t hd ) 58 88 170 clock active display area (t he ) 800 800 800 clock front porch (t hf ) - 40 - clock (clock signal) item min. typ. max. unit remark frequency 35 40 42 mhz [note1] [note1] in case of lower frequency, the deterioration of display quality, flicker etc., may be occurred.
ld18203a- (hsync-vsync phase difference) t hv vsync hsync item(symbol) min. typ. max. unit remark hsync-vsync phase difference (t hv )1 - t ha -t hc clock (hsync-enab phase difference) enab hsync t hn item min. typ. max. unit remark hsync-enab phase difference (t hn ) 58 88 170 clock 8-2 display position item standards beginning ending unit remark horizontal rising edge of enab 0 800 clock rising edge of hsync 88 888 clock [note1] vertical rising edge of vsync 23 623 line [note1] in case that enab signal is fixed to low level. do not keep enab signal high during operation. 8-3. input data signals and display position on the screen d1,dh1 d1,dh2 d1,dh3 d2,dh2 d2,dh1 d3,dh1 rgb display position of input data ( h , v *% d800, d1,dh600 d800,dh1 dh600
ld18203a- 9. input signals, basic display colors and gray scale of each color colors & data signal gray scale gray scale r0 r1 r2 r3 r4 r5 g0 g1 g2 g3 g4 g5 b0 b1 b2 b3 b4 b5 black - 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue - 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 green - 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 cyan - 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 red - 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 magenta - 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 yellow - 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 white - 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 black gs0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 gs1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 darker gs2 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ? brighter gs61 1 0 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 ? gs62 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 red gs63 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 black gs0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 gs1 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 darker gs2 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 ? brighter gs61 0 0 0 0 0 0 1 0 1 1 1 1 0 0 0 0 0 0 ? gs62 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 green gs63 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 black gs0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 gs1 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 darker gs2 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 ? brighter gs61 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 1 1 1 ? gs62 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 blue gs63 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 :low level voltage, 1 : high level voltage each basic color can be displayed in 64 gray scales from 6 bit data signals. according to the combination of total 18 bit data signals, the 262,144-color display can be achieved on the screen. basic color gray scale of red gray scale of green gray scale of blue
ld18203a- 10. optical characteristics ta=25 o c, vcc=+3.3v parameter symbol condition min. typ. max. unit remark viewing horizontal e 21, e 22 cr>10 60 70 - deg. [note1] angle vertical e 11 35 40 - deg. [note4] range e 12 55 70 - deg. contrast ratio crn e =0 o 150 - - - [note2] cro optimum viewing angle - 300 - - [note4] response rise r e =0 o - 10 - ms [note3] time decay d - 25 - ms [note4] x 0.263 0.313 0.363 - [note4] chromaticity of white y 0.279 0.329 0.379 - y l1 280 350 - cd/m 2 il=6.0marms fl=60khz luminance of white white uniformity / w - - 1.45 - [note5] e 21, e 22 - 35 - deg. e 11 - 25 - deg. viewing angle range within defined brightness e 12 50% of the maximum brightness - 30 - deg. [note1] the measurement shall be executed 30 minutes after lighting at rating. the optical characteristics shall be measured in a dark room or equivalent state with the method shown in fig.3 below. photodetector viewing angle/response time : bm-5a (topcon) contrast ratio/luminance of white/chromaticity : sr-3(topcon) fig.3 optical characteristics measurement method center of the screen tft-lcd module oo field=1 ? lcd p anel
ld18203a- [note1]definitions of viewing angle range: n orm al line t 22 t 12 t 11 t 21 6 o?clock direction [note2]definition of contrast ratio: the contrast ratio is defined as the following. contrast ratio (cr) = [note3]definition of response time: the response time is defined as the following figure and shall be measured by switching the input signal for "black" and "white" . 90% 100% white white b lack 10% 0% w r w d time photodetector output (relative value) [note4]this shall be measured at center of the screen. [note5]definition of white uniformity: white uniformity is defined as the following with five measurements (a~e). 11. display quality the display quality of the color tft-lcd module shall be in compliance with the incoming inspection standard. luminance (brightness) with all pixels white luminance (brightness) with all pixels black maximum luminance of five points (brightness) minimum luminance of five points (brightness) y9 a b c d e p ixel 200 400 600 pixel 150 300 450
ld18203a- 12.handling precautions a) be sure to turn off the power supply when inserting or disconnecting the cable. b) be sure to design the cabinet so that the module can be installed without any extra stress such as warp or twist. c) since the front polarizer is easily damaged, pay attention not to scratch it. d) wipe off water drop immediately. long contact with water may cause discoloration or spots. e) when the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. f) since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. handle with care. g) since cmos lsi is used in this module, take care of static electricity and injure the human earth when handling.observe all other precautionary requirements in handling components. h) since there is a circuit board in the module back, stress is not added at the time of a design assembly. please make it like. if stress is added, there is a possibility that circuit parts may be damaged. i) protection film is attached to the module surface to prevent it from being scratched . peel the film off slowly , just before the use, with strict attention to electrostatic charges. blow off 'dust' on the polarizer by using an ionized nitrogen. j) the polarizer surface on the panel is treated with anti-glare for low reflection. in case of attaching protective board over the lcd, be careful about the optical interface fringe etc. which degrades display quality. k) do not expose the lcd panel to direct sunlight. lightproof shade etc. should be attached when lcd panel is used under such environment l) connect gnd to 4 place of mounting holes to stabilize against emi and external noise. m) there are high voltage portions on the backlight and very dangerous. careless touch may lead to electrical shock. when exchange lamps or service, turn off the power without tail. n) when handling lcd modules and assembling them into cabinets, please be noted that long-term storage in the environment of oxidization or deoxidization gas and the use of such materials as reagent,solvent, adhesive, resin, etc. which generate these gasses, may cause corrosion and discoloration of the lcd modules. o) cold cathode fluorescent lamp in lcd panel contains a small amount of mercury, please follow local ordinances or regulations for disposal. p) be careful of a back light lead not to pull by force at the time of the wiring to an inverter, or line processing. q) when install lcd modules in the cabinet, please tighten with ?torque=0.294 r 0.02n :/ m(3.0 r 0.2kgf :/ cm)?. r) liquid crystal contained in the panel may leak if the lcd is broken. rinse it as soon as possible if it gets inside your eye or mouth by mistake. s) notice:never dismantle the module , because it will cause failure. t) be careful when using it for long time with fixed pattern display as it may cause afterimage. u) adjusting volume have been set optimally before shipment, so do not change any adjusted value. if adjusted value is changed, the specification may not be satisfied. v) if a minute particle enters in the module and adheres to an optical material, it may cause display non- uniformity issue, etc. therefore, fine-pitch filters have to be installed to cooling and inhalation hole if you intend to install a fan. 13. packing form product country japan taiwan china piling number of cartons 5 9? max 9? package quantity in one carton 20 carton size 494(w) 326(d) 433(h) total mass of one carton filled with full modules 15.6kg packing form fig3
ld18203a- 14.reliability test items no. test item conditions remark 1 high temperature storage test ta=70 ` 240h 2 low temperature storage test ta= -30 ` 240h 3 high temperature & high humidity operation test ta=40 ` ; 95%rh 240h (no condensation) 4 high temperature operation test ta=65 ` 240h 5 low temperature operation test ta= -10 ` 240h 6 vibration test (non- operating) frequency: 10 :* 57hz/vibration width (one side):0.075mm : 57 :* 500hz/gravity:9.8m/s 2 sweep time : 11 minutes test period : 3 hours (1 hour for each direction of x,y,z) 7 shock test (non- operating) max. gravity : 490m/s 2 pulse width : 11ms, half sine wave direction : r x, r y, r z once for each direction. 8 esd test contact discharge ( 150pf 330 ) non-operating = r 10kv, operating = r 8kv atmospheric discharge ( 150pf 330 ) non-operating = r 20kv, operating = r 15kv 9 emi measurement in 10m site display position on the screen = ? h ? (full-screen), gnd to 4 place = un-connect, vcc / vsignal = typ. vcci (class b) [result evaluation criteria] under the display quality test conditions with normal operation state, these shall be no change which may affect practical display function. (normal operation state 9? temperature:15 :* 35 ` , humidity:45 :* 75 9? , atmospheric pressure:86 :* 106kpa) 15.others 1) lot number label: /qfgn0q lot no. 9 9 9t 5gtkcn0q
ejctcevgtu 2tqfwevkqp[gct
.cuvfkikvqhfqokpkecn[gct 2tqfwevkqpoqpvj
:;< #uugodn[ukvgeqfg 9 9 9 9y 9 &kuegtpogpveqfg 9a 9t 2tqfweveqwpvtkgu#tgcu9?,#2#06#+9#0qt%*+0# 15-2 packing box label: to ? j 9? 9 9? 9? l q 1 0 4 s 1 l g 2 1 !>c#$} 9?9y:9?9t999a999t999y &d0=c8ch 9?9y9? 9t9 ::: a?2 ? j barcode barcode barcode *voj y!a\l^a?? /qfgnpwodgt lot number (date) quantity of module type quantity date LQ104S1LG21 20pcs 2005.6.1 quantity of module : japan quantity of module : taiwan or china LQ104S1LG21 * 15-3 if any problem occurs in relation to the description of this specification , it shall be resolved through discussion with spirit of cooperation.

specifications are subject to change without notice. suggested applications (if any) are for standard use; see important restrictions for limitations on special applications. see limited warranty for sharps product warranty. the limited warranty is in lieu, and exclusive of, all other warranties, express or implied. all express and implied warranties, including the warranties of merchantability, fitness for use and fitness for a particular purpose, are specifically excluded. in no event will sharp be liable, or in any way responsible, for any incidental or consequential economic or property damage. north america europe japan sharp microelectronics of the americas 5700 nw pacific rim blvd. camas, wa 98607, u.s.a. phone: (1) 360-834-2500 fax: (1) 360-834-8903 fast info: (1) 800-833-9437 www.sharpsma.com sharp microelectronics europe division of sharp electronics (europe) gmbh sonninstrasse 3 20097 hamburg, germany phone: (49) 40-2376-2286 fax: (49) 40-2376-2232 www.sharpsme.com sharp corporation electronic components & devices 22-22 nagaike-cho, abeno-ku osaka 545-8522, japan phone: (81) 6-6621-1221 fax: (81) 6117-725300/6117-725301 www.sharp-world.com taiwan singapore korea sharp electronic components (taiwan) corporation 8f-a, no. 16, sec. 4, nanking e. rd. taipei, taiwan, republic of china phone: (886) 2-2577-7341 fax: (886) 2-2577-7326/2-2577-7328 sharp electronics (singapore) pte., ltd. 438a, alexandra road, #05-01/02 alexandra technopark, singapore 119967 phone: (65) 271-3566 fax: (65) 271-3855 sharp electronic components (korea) corporation rm 501 geosung b/d, 541 dohwa-dong, mapo-ku seoul 121-701, korea phone: (82) 2-711-5813 ~ 8 fax: (82) 2-711-5819 china hong kong sharp microelectronics of china (shanghai) co., ltd. 28 xin jin qiao road king tower 16f pudong shanghai, 201206 p.r. china phone: (86) 21-5854-7710/21-5834-6056 fax: (86) 21-5854-4340/21-5834-6057 head office: no. 360, bashen road, xin development bldg. 22 waigaoqiao free trade zone shanghai 200131 p.r. china email: smc@china.global.sharp.co.jp sharp-roxy (hong kong) ltd. 3rd business division, 17/f, admiralty centre, tower 1 18 harcourt road, hong kong phone: (852) 28229311 fax: (852) 28660779 www.sharp.com.hk shenzhen representative office: room 13b1, tower c, electronics science & technology building shen nan zhong road shenzhen, p.r. china phone: (86) 755-3273731 fax: (86) 755-3273735

▲Up To Search▲

Price & Availability of LQ104S1LG21

	To Download LQ104S1LG21 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .