 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| toshiba toshiba corporation 1/11 tlg1005, tlgd1005, tlpg1005, TLOE1005, tlye1005, tls1005, tlra1005 the information contained here is subject to change without notice. the information contained herein is presented only as guide for the applications of our products. no responsibility is assumed by toshiba for any infringements of patents or other rights of the third parties which may result from its use. no license is granted by implication or otherwise under any patent or patent rights of toshiba o r others. these toshiba products are intended for usage in general electronic equipments (of?e equipment, communication equipment, measuring equipment, domestic electri?ation, etc.) please make sure that you consult with us before you use these toshiba products in equip- ments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human li fe (atomic energy control, spaceship, traf? signal, combustion control, all types of safety devices, etc.). toshiba cannot accept liability to any damage which may occur in case these toshiba products were used in the mentioned equipments without prior consultation with toshiba. led surface mount device features 2 mm thrust out domed lens 3.2(l) x 2.4(w) x 2.5(h) mm size - high ef?iency smd lamps - realizing over 5 times luminous than tl*1002 series - small package - high density mounting is available low drive current - high intensity light emission - recommended forward current: i f = 10 ma (dc) all transparent plastic molded lens - provides clear indication available in an extensive lineup from red light led to pure green light led fast response time - high intensity of pulse operation re?w soldering is applicable packed quanity: 1000 pcs/reel applications: - portable instrument - message signboard - high intensity backlight - battery-driven equipment line-up product name color material tlpg1005 pure green gap tlg1005 green gap tlgd1005 green gap tlye1005 yellow ingaalp TLOE1005 orange ingaalp tls1005 red gaasp tlra1005 red gaalas unit in mm
2 / 11 toshiba corporation tlg1005, tlgd1005, tlpg1005, TLOE1005, tlye1005, tls1005, tlra1005 maxim um ratings (t a = 25 c) electr o-optical characteristics (t a = 25 c) product name for ward current (dc) i f (ma) reverse v oltage v g (v) power dissipation p d (mw) operating t emperature t opr ( c ) storage t emperature t stg ( c ) tlpg1005 25 4 65.0 tlg1005 25 4 62.5 tlgd1005 25 4 62.5 - 25 ~ 80 - 30 ~ 85 tl ye1005 25 4 62.5 TLOE1005 25 4 60.0 tls1005 25 4 65.0 tlra1005 25 4 60.0 product name emission spectrum luminous intensity for ward v oltage reverse current l p d l i v v f i g t yp. t yp. i f min. t yp. i f t yp. max. i f max. v g tlpg1005 555 20 20 4.76 12 20 2.05 2.6 20 5 4 tlg1005 567 25 20 15.3 45 20 2.05 2.5 20 5 4 tlgd1005 570 25 20 27.2 75 20 2.1 2.5 20 5 4 tl ye1005 590 13 20 85 300 20 2.1 2.5 20 50 4 TLOE1005 612 15 20 153 400 20 2.0 2.4 20 50 4 tls1005 635 40 20 8.5 25 20 2.05 2.6 20 50 4 tlra1005 660 25 20 153 450 20 1.85 2.4 20 50 4 unit nm ma mcd ma v ma m a v toshiba corporation 3 / 11 tlg1005, tlgd1005, tlpg1005, TLOE1005, tlye1005, tls1005, tlra1005 4 / 11 toshiba corporation tlg1005, tlgd1005, tlpg1005, TLOE1005, tlye1005, tls1005, tlra1005 toshiba corporation 5 / 11 tlg1005, tlgd1005, tlpg1005, TLOE1005, tlye1005, tls1005, tlra1005 6 / 11 toshiba corporation tlg1005, tlgd1005, tlpg1005, TLOE1005, tlye1005, tls1005, tlra1005 toshiba corporation 7 / 11 tlg1005, tlgd1005, tlpg1005, TLOE1005, tlye1005, tls1005, tlra1005 8 / 11 toshiba corporation tlg1005, tlgd1005, tlpg1005, TLOE1005, tlye1005, tls1005, tlra1005 toshiba corporation 9 / 11 tlg1005, tlgd1005, tlpg1005, TLOE1005, tlye1005, tls1005, tlra1005 10 / 11 toshiba corporation tlg1005, tlgd1005, tlpg1005, TLOE1005, tlye1005, tls1005, tlra1005 t aping speci cations: p ac ka ging leds ar e packed in an aluminum envelope with silicate to avoid the moistur e absorption. after opening the package, storing at following condition is r ecommended since air extension at soldering accor ding to the moistur e absorption in uences opti- cal characteristics: - t emperatur e 5 ~ 30 c - humidity 60% rh (max.) please execute baking if it has been 6 months under packed or 1 week under opened. recommended baking condition: 60 c , over 12 hours. toshiba corporation 11 / 11 tlg1005, tlgd1005, tlpg1005, TLOE1005, tlye1005, tls1005, tlra1005 soldering 1. re ow soldering: * it is r ecommended to use a r e ow fur nace of the upper and lower heater type. * the temperatur e pr o le as shown in fig. 1 is r ecommended for soldering leds by the r e ow fur nace. 2. post solder cleaning: when cleaning after soldering is needed, the following condition must be adher ed to. ?cleaning solvents: ak225 or alcohol ?t emperatur e: 50 c (122 f) max. for 30 seconds, or 30 c (86 f) max. for 3 minutes max. ?ultrasonic: 300w max. precaution f or mounting 1. no for ce to plastic par t of led when led is under high temperatur e. 2. no friction using a har d thing to avoid injuring plastic par t of led. 3. no contact between led and the other par ts, when installing an assembled boar d into the set. |
Price & Availability of TLOE1005
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |