View HSD100IFW1-F_4842460.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

h a n n sta r di sp l a y c o rp . document title HSD100IFW1-F formal specification pa ge no. 1/23 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. hannstar product specification (formal) 10.1 color tft-lcd module model: hsd100ifw1 -f note: 1.please contact hannstar display corp. befor e designing your product based on this module specification. 2.the information contained herein is present ed merely to indicate the characteristics and performance of our products. no responsibility is a ssumed by hannstar for any intellectual property claims or other problems that may result f rom application based on the module described herein. www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title HSD100IFW1-F formal specification pa ge no. 2/23 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. record of revisions rev. date sub-model description of change 1.0 f01 formal product specification was first released www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title HSD100IFW1-F formal specification pa ge no. 3/23 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. contents 1.0 general description p.4 2.0 absolute maximum ratings . p.5 3.0 optical characteristics. . p.6 4.0 block diagram p.10 5.0 interface pin connection p.12 6.0 electrical characteristics p.14 7.0 reliability test items p.18 8.0 outline dimension p.19 9.0 lot mark ... p.20 10.0 package specification p.21 11.0 general precaution p.22 www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title HSD100IFW1-F formal specification pa ge no. 4/23 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 1.0 general description 1.1 introduction hannstar display model HSD100IFW1-F is a color acti ve matrix thin film transistor (tft) liquid crystal display (lcd) that uses amorph ous silicon tft as a switching device. this model is composed of a tft lcd panel, a driving circuit and a back light system. this tft lcd has a 10.1 (17:10) inch diagonally measured active display area with wsvga (1024 horizontal by 600 ver tical pixel) resolution. 1.2 features 10.1 (17:10 diagonal) inch configuration one channel lvds interface 262k color by 6 bit r.g.b signal input rohs / halogen free compliance 1.3 applications mobile nb digital photo frame display terminal for av application 1.4 general information item specification unit outline dimension 235 x 145.8 x 5.5 (typ.) mm display area 220.416(h) x 129.15(v) mm number of pixel 1024 rgb (h) x 600(v) pixels pixel pitch 0.21525(h) x 0.21525(v) mm pixel arrangement rgb vertical stripe display mode normally white surface treatment glare, hard-coating (3h) with nor mal film weight 260 (typ.) g back-light single led (side-light type) logic system 1.1 (max.) w power consumption b/l system 3.1 (max.) w 1.5 mechanical information item min. typ. max. unit horizontal (h) 234.5 235 235.5 mm vertical (v) 145.3 145.8 146.3 mm module size depth (d) 5.5 5.8 mm weight 260 275 g www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title HSD100IFW1-F formal specification pa ge no. 5/23 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 2.0 absolute maximum ratings 2.1 electrical absolute rating 2.1.1 tft lcd module item symbol min. max. unit note led power supply voltage v led -0.3 6.0 v gnd=0 logic supply voltage v dd -0.3 6.0 v 2.2 environment absolute rating item symbol min. max. unit note operating temperature t opa 0 50 storage temperature t stg -20 60 www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title HSD100IFW1-F formal specification pa ge no. 6/23 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 3.0 optical characteristics 3.1 optical specification item symbol condition min. typ. max. unit note contrast cr 400 500 (1)(2) rising t r 5 7 response time falling t f 20 28 msec (1)(3) white luminance (center) y l 200 250 cd/m 2 (1)(4) (i l =200ma) w x 0.260 0.310 0.360 color chromaticity (cie1931) white w y =0 normal viewing angle 0.280 0.330 0.380 l 40 45 hor. r 40 45 u 10 15 viewing angle ver. d cr>10 30 35 (1)(4) brightness uniformity b uni =0 70 % (5) optima view direction 6 o clock (6) 3.2 measuring condition measuring surrounding dark room led current i l 200ma ambient temperature 252 o c 15min. warm-up time. www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title HSD100IFW1-F formal specification pa ge no. 7/23 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 3.3 measuring equipment fpm520 of westar display technologies, inc., which utilized sr-3 for chromaticity and bm-5a for other optical characteristics. measuring spot size 20 ~ 21 mm note (1) definition of viewing angle: note (2) definition of contrast ratio (cr) : measured at the center point of panel luminance with all pixels white cr = luminance with all pixels black l r u d =0 o =180 o 12 oclock =90 o 6 oclock =270 o www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title HSD100IFW1-F formal specification pa ge no. 8/23 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. note (3) definition of response time : sum of t r and t f note (4) definition of optical measurement setup time optical response white(tft off) black (tft on) white(tft off) 100% 90% 10% 0% t r t f www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title HSD100IFW1-F formal specification pa ge no. 9/23 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. note (5) definition of brightness uniformity 16.67% 50.00% 83.33% 16.67% 50.00% 83.33% y2 y3 y4 y9 y1 y5 y8 y7 y6 luminance uniformity = 100% note (6) rubbing direction (the different rubbing direction will cause the different optima view direction. (min luminance of 9 points) (max luminance of 9 points) www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title HSD100IFW1-F formal specification pa ge no. 10/23 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 4.0 block diagram 4.1 tft lcd module: 4.2 pixel format 1,1 1,1024 600, 1024 lcd display area 2,1 1,2 1,3 1,4 600 lines 1024 pixel (3072 dots) 600,1 r r r b g 1 pixel dc/dc converter timing controller + lvds receiver connector gray scale manipulation voltage generation circuit liquid crystal panel 1024x600 pixels x-driver ic y-driver ic edid led b/l led driver www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title HSD100IFW1-F formal specification pa ge no. 11/23 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 4.3 relationship between displayed color and input display msb lsb r 5 r 4 r 3 r 2 r 1 r 0 msb lsb g 5 g 4 g 3 g 2 g 1 g 0 msb lsb b 5 b 4 b 3 b 2 b 1 b 0 gray scale level black l l l l l l l l l l l l l l l l l l - blue l l l l l l l l l l l l h h h h h h - green l l l l l l h h h h h h l l l l l l - light blue l l l l l l h h h h h h h h h h h h - red h h h h h h l l l l l l l l l l l l - purple h h h h h h l l l l l l h h h h h h - yellow h h h h h h h h h h h h l l l l l l - basic color white h h h h h h h h h h h h h h h h h h - black l l l l l l l l l l l l l l l l l l l0 l l l l l h l l l l l l l l l l l l l1 l l l l h l l l l l l l l l l l l l l2 : : : : : : l3l60 h h h h l h l l l l l l l l l l l l l61 dark light h h h h h l l l l l l l l l l l l l l62 gray scale of red red h h h h h h l l l l l l l l l l l l red l63 black l l l l l l l l l l l l l l l l l l l0 l l l l l l l l l l l h l l l l l l l1 l l l l l l l l l l h l l l l l l l l2 : : : : : : l3l60 l l l l l l h h h h l h l l l l l l l61 dark light l l l l l l h h h h h l l l l l l l l62 gray scale of green green l l l l l l h h h h h h l l l l l l green l63 black l l l l l l l l l l l l l l l l l l l0 l l l l l l l l l l l l l l l l l h l1 l l l l l l l l l l l l l l l l h l l2 : : : : : : l3l60 l l l l l l l l l l l l h h h h l h l61 dark light l l l l l l l l l l l l h h h h h l l62 gray scale of blue blue l l l l l l l l l l l l h h h h h h blue l63 black l l l l l l l l l l l l l l l l l l l0 l l l l l h l l l l l h l l l l l h l1 l l l l h l l l l l h l l l l l h l l2 : : : : : : l3l60 h h h h l h h h h h l h h h h h l h l61 dark light h h h h h l h h h h h l h h h h h l l62 gray scale of white & black white h h h h h h h h h h h h h h h h h h white l63 www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title HSD100IFW1-F formal specification pa ge no. 12/23 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 5.0 interface pin connection 5.1 tft lcd module cn1 (input signal): fi-xb30sl-hf10 (jae or equivalent) pin no. signal description 1 gnd ground 2 vdd 3.3v power 3 vdd 3.3v power 4 v_edid 3.3v power for edid 5 adj adjust for led brightness note 6 clk_edid edid clock input 7 data_edid edid data input 8 rxin0- lvds signal - channel0- 9 rxin0+ lvds signal+ channel0+ 10 gnd ground 11 rxin1- data input channel1- 12 rxin1+ data input channel1+ 13 gnd ground 14 rxin2- data input channel2- 15 rxin2+ data input channel2+ 16 gnd ground 17 rxclkin- data input clk- 18 rxclkin+ data input clk+ 19 gnd ground 20 nc nc 21 nc nc 22 gnd ground 23 gnd ground 24 vled led power +5v 25 vled led power +5v 26 vled led power +5v 27 nc nc 28 vdd_en vdd enable pin 29 nc nc 30 vled_en v led enable pin note the brightness of lcd panel could be changed by adj usting adj www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title HSD100IFW1-F formal specification pa ge no. 13/23 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. note (1) adj can adjust brightness to control pin. pulse duty the bigger the brighter. (2) adj signal=0~3.3v operation frequency parameter symbol conditions min typ max unit adj logic-high level v adjh 1.8 3.3 3.6 v adj logic-low level v adjl 0 0 0.4 v dimming frequency f adj 18 20 22 khz dimming duty cycle d 20 -- 100 % t s t on d= t on / t s x 100% f adj = 1 / t s (3) vled_en & vdd_en operation conditions parameter symbol min typ max units remark vdd_en (h) 3.0 3.3 3.6 vdd on vdd on/off signal vdd_en (l) -- 0 0.2 volt vdd off vled_en (h) 3.0 3.3 3.6 vled on vled on/off signal vled_en (l) -- 0 0.2 volt vled off luminance dark luminance bright luminance duty(0%) duty(100%) duty www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title HSD100IFW1-F formal specification pa ge no. 14/23 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 6.0 electrical characteristics 6.1 tft lcd module item symbol min. typ. max. unit note v dd 3.0 3.3 3.6 v supply vol tage v led 4.7 5.0 5.3 v current of power supply idd - 0.3 - a v dd =3.3v l0 pattern note (1) v dd- dip condition : when vdd operating within 2.7v Q vdd<3.0v td Q 10ms , the display may momentarily become abnormal . vdd<2.7v, vdd dip condition should also follow the power on/off conditions for supply voltage. gnd 3.0 v 2.7v td vdd www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title HSD100IFW1-F formal specification pa ge no. 15/23 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 6.2 switching characteristics for lvds receiver item symbol min. typ. max. unit conditions differential input high threshold vth 100 mv differential input low threshold vtl -100 mv v cm =1.2v -10 +10 ua input current differential input voltage i in |v id | 0.1 0.6 v common mode voltage offset v cm (|v id |/2) 1.25 1.8-0.4-(|v id |/2) v 6.3 bit mapping & interface definition for 6bits lvds input rclk rin0 rin1 rin2 lvds receiver input timing definition pervious cycle current cycle next cycle r[2] r[1] r[0] g[0] r[5] r[4] r[3] r[2] r[1] r[0] g[0] b[4] b[3] b[2] de (vs) (hs) b[5] b[4] b[3] b[2] de g[2] g[1] b[1] b[0] g[5] g[4] g[3] g[2] g[1] b[1] g[3] 0.5/7t 1.5/7t 2.5/7t 3.5/7t 4.5/7t 5.5/7t 6.5/7t 7t www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title HSD100IFW1-F formal specification pa ge no. 16/23 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 6.4 interface timing (de mode) item symbol min. typ. max. unit frame rate -- 55 60 65 hz frame period t1 612 625 638 line vertical display time t2 600 600 600 line vertical blanking time t3 12 25 38 line 1 line scanning time t4 1160 1200 1240 clock horizontal display time t5 1024 1024 1024 clock horizontal blanking time t6 136 176 216 clock clock rate t7 39 45 51.42 mhz timing diagram of interface signal (de mode) www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title HSD100IFW1-F formal specification pa ge no. 17/23 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 6.5 power on / off sequence item min. typ. max. unit remark tp1 0.5 -- 100 msec tp2 200 -- msec tp3 200 -- msec tp4 0.5 -- 100 msec tp5 500 -- -- msec note (1) the supply voltage of the external system for t he module input should be the same as the definition of v dd . (2) apply the lamp volatge within the lcd operation range. when the back-light turns on before the lcd operation or the lcd truns off befor e the back-light turns off, the display may momentarily become white. (3) in case of vdd = off level, please keep the lev el of input signal on the low or keep a high impedance. (4) tp4 should be measured after the module has bee n fully discharged between power off and on period. (5) interface signal shall not be kept at high impe dance when the power is on. power on power off vdd_en 0v tp1 tp4 signal tp5 vled_en tp2 tp3 www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title HSD100IFW1-F formal specification pa ge no. 18/23 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 7.0 reliability test items no. item conditions remark 1 high temperature storage ta=+60 o c, 240hrs 2 low temperature storage ta=-20 o c, 240hrs 3 high temperature operation ta=+50 o c, 500hrs 4 low temperature operation ta=0 o c, 500hrs 5 high temperature and high humidity (operation) ta=+50 o c, 80%rh, 500hrs 6 thermal cycling test (non operation) -20 o c(30min) +60 o c(30min), 100 cycles 7 electrostatic discharge 200v,200pf(0 ) 1 time/connector 8 vibration 1.random: 1.04g, 10~500hz, xyz, 30min/each direction 2.sine: 1.5g, 5~500hz, xyz 30min/each direction 9 shock half-sine, 220g, 2ms, xyz, 1time 10 vibration (with carton) random: 1.04g, 10~500hz, xyz, 45min/each direction 11 drop (with carton) height 60 cm 1 corner, 3 edges, 6 surfaces jis z0202 note: there is no display function ng issue occurred, all the cosmetic specification is judged before the reliability stress. www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title HSD100IFW1-F formal specification pa ge no. 19/23 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 8.0 outline dimension 8.1 outline dimension u u nit : mm www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title HSD100IFW1-F formal specification pa ge no. 20/23 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 9.0 lot mark 9.1 lot mark 10 11 12 13 14 15 code 1,2,3,4,5,6: hannstar internal flow control co de. code 7: production location. code 8: production year. code 9: production month. code 10,11,12,13,14,15: serial number. note (1) production year: code 8 is defined by the last number of the year, for example year 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 mark 1 2 3 4 5 6 7 8 9 0 note (2) production month month jan. feb. mar. apr. may. jun. jul. aug. sep. oct nov. dec. mark 1 2 3 4 5 6 7 8 9 a b c 9.2 detail of lot mark (1) below label is attached on the backside of the lcd module. see section 8.0: outline dimension. (2) the detail of lot mark is attached as below. (3) this is subject to change without prior notice. hsd100ifw1 rev : * - f edx.x 6 a0 www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title HSD100IFW1-F formal specification pa ge no. 21/23 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 10.0 package specification 10.1 packing form lcm model lcm qty. in the box inner box size (mm) notice HSD100IFW1-F 50 pcs/box ref.460 x 316 x 321 h 10.2 packing assembly drawings HSD100IFW1-F material notice box corrugated paper board (ab flute) partition/pad corrugated paper board (b flute) corner pad corrugated paper board (ab flute) esd bag pe www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title HSD100IFW1-F formal specification pa ge no. 22/23 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 11.0 general precaution 11.1 use restriction this product is not authorized for use in life supp orting systems, aircraft navigation control systems, military systems and any other applicatio n where performance failure could be life-threatening or otherwise catastrophic. 11.2 disassembling or modification do not disassemble or modify the module. it may da mage sensitive parts inside lcd module, and may cause scratches or dust on the dis play. hannstar does not warrant the module, if customers disassemble or modify the mod ule. 11.3 breakage of lcd panel 11.3.1.if lcd panel is broken and liquid crystal sp ills out, do not ingest or inhale liquid crystal, and do not contact liquid crystal with ski n. 11.3.2. if liquid crystal contacts mouth or eyes, r inse out with water immediately. 11.3.3. if liquid crystal contacts skin or cloths, wash it off immediately with alcohol and rinse thoroughly with water. 11.3.4. handle carefully with chips of glass that m ay cause injury, when the glass is broken. 11.4 electric shock 11.4.1. disconnect power supply before handling lcd module. 11.4.2. do not pull or fold the led cable. 11.4.3. do not touch the parts inside lcd modules a nd the fluorescent leds connector or cables in order to prevent electric shock. 11.5 absolute maximum ratings and power protection circuit 11.5.1. do not exceed the absolute maximum rating v alues, such as the supply voltage variation, input voltage variation, variation in pa rts parameters, environmental temperature, etc., otherwise lcd module may be dama ged. 11.5.2. please do not leave lcd module in the envir onment of high humidity and high temperature for a long time. 11.5.3. its recommended to employ protection circu it for power supply. 11.6 operation 11.6.1 do not touch, push or rub the polarizer with anything harder than hb pencil lead. 11.6.2 use fingerstalls of soft gloves in order to keep clean display quality, when persons handle the lcd module for incoming inspection or as sembly. 11.6.3 when the surface is dusty, please wipe gentl y with absorbent cotton or other soft material. www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title HSD100IFW1-F formal specification pa ge no. 23/23 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 11.6.4 wipe off saliva or water drops as soon as po ssible. if saliva or water drops contact with polarizer for a long time, they may ca uses deformation or color fading. 11.6.5 when cleaning the adhesives, please use abso rbent cotton wetted with a little petroleum benzine or other adequate solvent. 11.7 mechanism please mount lcd module by using mounting holes arr anged in four corners tightly. 11.8 static electricity 11.8.1 protection film must remove very slowly from the surface of lcd module to prevent from electrostatic occurrence. 11.8.2 because lcd module use cmos-ic on circuit bo ard and tft-lcd panel, it is very weak to electrostatic discharge. please be car eful with electrostatic discharge. persons who handle the module should be grounded through adequate methods. 11.9 strong light exposure the module shall not be exposed under strong light such as direct sunlight. otherwise, display characteristics may be changed. 11.10 disposal when disposing lcd module, obey the local environm ental regulations. www.datasheet.net/ datasheet pdf - http://www..co.kr/

▲Up To Search▲

Price & Availability of HSD100IFW1-F

	To Download HSD100IFW1-F Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .