tai-saw technology co., ltd. 2 tst dcc release document tai-saw technology co., ltd. no. 3, industrial 2nd rd., ping-chen industrial district, taoyuan, 324, taiwan, r.o.c. tel: 886-3-4690038 fax: 886-3-4697532 e-mail: tstsales@mail.taisaw.com web: www.taisaw.com smd 8.2x6.0 vco model no.: TV0134A rev. no.:1.0 description and applications: voltage control oscillator, smd type, 8.2mmx6.0mm. conditions: limits parameter symbol min. typ. max. units supply voltage v cc 2.6 2.8 3.0 v control voltage range v t 0.5 - 2.5 v load impedance - - 50 - ohm temperature range - -30 25 85 electrical specifications: for different applications, the specification change is possible. please contact tst sales representative or application engineer for your requirement. limits parameter condition min. typ. max. units power consumption 23 3 - - - 10 ma operation frequency range 23 3 - 983 - 1083 mhz operation frequency range 23+-3 vcc=2.8v vt=1.5v 1028 1038 mhz control voltage sensitivity 23 3 - 65 75 90 mhz/v output level 23 3 - -16 -13 -10 dbm c/n 23 3 100 khz offset 105 - - dbc/hz pushing figure 23 3 vcc=2.8+-0.2v, ref vcc=2.8v -1.0 - +1.0 mhz pulling figure 23 3 vswr=2.0 for all phase, ref:50ohm -1.0 - +1.0 mhz harmonics (2fo, 3fo) 23 3 - - -20 dbc harmonics (11fo) 23 3 -75 dbc temperature stability 23 3 -30~+85 deg.c ref. 25 deg.c -5.0 - +5.0 mhz rohs compliant lead-free soldering
tai-saw technology co., ltd. 3 tst dcc release document mechanical dimensions (mm): a=8.2 b=6.0 c=1.6 d=6.4 e=4.2 f=2.4 g=5.5 h=1.1 i=1.5 pin #1= rf out pin #2= vcc pin #3= vcont (vt) pin #4= gnd pin #5= gnd pin #6= gnd marking: line 1= 0134 (tst p/n) line 2= tst logo + vco product code + date code product code table: date code table: wk01 wk02 wk03 wk04 wk05 wk06 wk07 wk08 wk09 wk10 wk11 wk12 wk13 abcdefgh i jklm wk14 wk15 wk16 wk17 wk18 wk19 wk20 wk21 wk22 wk23 wk24 wk25 wk26 nopqrs tuvwxy z wk27 wk28 wk29 wk30 wk31 wk32 wk33 wk34 wk35 wk36 wk37 wk38 wk39 abcde f gh i j k lm wk40 wk41 wk42 wk43 wk44 wk45 wk46 wk47 wk48 wk49 wk50 wk51 wk52 nopq r s t uvwxyz
tai-saw technology co., ltd. 4 tst dcc release document part orientation: 8.2x6.0mm package carrier tape tape width: 16 mm tape pitch (part to part): 12 mm reel diameter: 320.2mm (13 inch) quantity per reel: 2000 [notes] 1. unit : mm. 2. unless otherwise specified tolerance on dim. +/-0.1mm. 3. material: conductive polystyrene. 4. color: black. 5. 10 pitch cumulative tolerance +/-0.2mm. tape & reel:
tai-saw technology co., ltd. 5 tst dcc release document reflow profile: note: 1.max peak temperature: 260+/-5 deg c; time: 10+/-2 sec 2. temperature: 217+/-5 deg c; time: 90~100 sec
|